billboard BB2732 2×8 Inch Portable Party Speaker Instruction Manual

2×8 Inch Portable Party Speaker Model#BB2732
Instruction Manual

WARNING!
Please read this manual carefully before using the product. Keep it in a safe place for future reference.

A. There are high voltage zones inside this unit that can cause injuries. Please do not open the unit. In case of technical failure, please contact the authorized service center.
b. Never place the unit in the rain or in moist zones so as to avoid a fire or an electric shock
C. This device uses a laser system. To prevent direct exposure to the laser beam, please do not open the unit or stare at the laser beam.
d. If technical maintenance is required, please contact the authorized service center.
e. If the supply cord is damaged in any way, please have it replaced by the manufacturer, supplier or a qualified electrician.
CAUTION
a. Do not place the unit on an unstable surface as it may fall and break or cause damage to people or pets.
b. Disconnect the unit from the mains before cleaning it. Do not use cleaning liquids or sprays. Use only a soft, damp cloth.
C. To avoid possible damage to the equipment, please unplug it during storms or when it will not be used for a long time.
d. Do not insert any object into the unit through the ventilation openings as this could cause a short circuit and start a fire. Do not pour liquid on the speaker.
The Party Speaker is not a toy. Please keep it out of the reach of young children. Please do not discard this rechargeable device as trash. Consult your local waste collection agency for proper disposal or recycling methods. You may also contact sCall2Recyde” at 877-273-2925 or online at “call2Recyde.org* for a battery recycling drop-off location near you.

BATTERY CAUTION:
Do not disassemble, short circuit, or expose to fire or high temperature. Properly connect specified devices. Recycle batteries according to local, state, and national regulations.
It may damage your hearing if you listen at a high volume for a long time. It is recommended you use the lowest volume possible for listening to music.

CONTROL PANEL

1. Microphone input
2. Microphone input
3. Line in
4. USB input
5. Micro-SD input
6. Power ON/OFF
7. LED Light Switch
8. MIC Volume
9. Main Volume
10. Echo-
11.Echo+| 12. Record function
13. Change the Light mode
14. Repeat function
15. Previous song
16. Next song
17.Pause&Play/ TWS Function
18. Mode-Bluetooth, FM, Line In, USB, Micro-SD
19. Bluetooth’ function
20. Mega Bass
21. Menu: Bass adjustment and treble adjustment
---|---

REMOTE CONTROL

2 AAA Batteries are required. (not included)

1. Mute- Available to mute in any mode

2. Previous Song

3. Mode-Press to skip to Bluetooth FM/ Line In/ USB/ Micro-SD

4. Record function-
   1. When the unit is working in USB/TF mode, plug in the wired microphone, then short press the button REC to begin recording.
   2. Short press the button REC PLAY to stop recording and replay the recorded file repeatedly.
   3. Then short press button REC PLAY or button R-DEL to delete the recorded file and resume USB/ TF playing.

5. Echo

6. BASS+/-

7. EQ function

8. Microphone Volume+/-

9. Stand by

10. Pause&Play

11. Next song

12. Light mode

13. Repeat function

14. Record play

15. Record delete

16. Echo+

17. Microphone priority

18. Treble+/-

19. Main Volume

20. Number buttons- Under USB/Micro-SD mode to choose songs.

BLUETOOTH
Press MODE or Blue button on the unit or the remote control until Bluetooth is selected.

1. Put the cell phone within 30ft.
2. Activate the Bluetooth features on your cell phone so that the cell phone starts to search for the Bluetooth device.
3. Select the correct model No. from the device found by the cell phone.
4. Shortly press the PLAY/PAUSE button to play or pause music. Short press the” or ” ” key to select the previous or next track.

LINE IN MODE : Press the MODE button on the unit or the remote control until LINE is Selected. Play the music of the device connected to the LINE input.
USB Mode:

1. After start-up, press MODE to select “USB” and insert the USB device. The unit will automatically read and play the music on the USB device.
2. Press the “ ****” key shortly to pause or play.
3. Shortly press the” ****” key to the previous song.
4. Shortly press the” ****” key to the next song.

Recording Function
TWS CONNECTION : Using TWS ( True Wireless Stereo): Press the “Pause/Play” button for 3 seconds on one of the speakers to turn on/off the TWS function, the display will show “SLAU” on one of the speakers. Go to your Bluetooth device, and select “BB-BT-SP, TWS will be connected /disconnected successfully

LIMITED WARRANTY

ESI Cases & Accessories, Inc., warrants to the first consumer purchaser that this product, when shipped in its original container to the original purchaser will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect and replace the defective product or part thereof at no charge to the purchaser for parts or labor for the time periods described. This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below nor at any Product the exterior of which has been damaged or defaced which design or construction. The limited warranty described herein is in addition to applicable law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH BELOW
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on the behalf of ESI Cases & Acces-sories, Inc.
The warranties described herein shall be the sole and exclusive Warranties granted by ESI Cases & Accessories, Inc. and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of ESI Cases & Acces-sories, Inc. to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liabilities and responsibilities of ESI Cases & Accessories, Inc. be liable or in any way responsible, for any incidental of consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Return Instructions
If your speaker malfunctions during the warranty period of one calendar year (90 days for battery), contact our customer service department at 212-883-8838 to obtain troubleshooting information. If troubleshooting assistance fails to remedy the problem, you will receive a return authorization # and instructions for sending your unit to our Service Center. Your return authorization number must be dearly visible and placed on the outside of the box when the unit is returned. Enclose a copy of your original proof of purchase showing the original purchase date, along with detailed information describing the exact nature of your problem. Be sure to include your complete name, address, email address, and daytime and evening contact numbers. In addition, please send a check or money order made payable to “ESI Cases & Accessories ” for the return freight amount (given to you by our service agents). All of the above must be included with your return, or your package will not be eligible for service under our warranty. The customer is responsible for packing the speaker in its original carton or equivalent, and for ensuring, and shipping the unit to our service center. Please make sure to pack all accessories included with your speaker so that we can properly identify any issues. All freight costs to return the unit to ESI Cases & Accessories., are the responsibility of the customer. If your speaker is under warranty, then ESI Cases & Accessories. will at its sole discretion, exchange or repair the speaker without charge for parts and labor. The customer is responsible for return freight and should include a check or money order payable to “ESI Cases & Accessories.” with your return for the return freight amount. Any shipments received without a Return Authorization number will be refused. For more details please contact our customer service department.

Send product: ESI Cases & Accessories
44 East 32nd Street
New York, NY 10016
Tech Support: 212-883-8838
TechSupport@ESICellular.com

Power Input

Power input support AC100-240V 50/60Hz
Use the power cable connected to the back of the speaker power input jack for charging, Display shows the battery charging state.
FCC Information
FCC ID: 2AQBE-BB2732
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause -harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV/technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Tested to comply with FCC standards. FOR HOME OR OFFICE USE.
Warming: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or in conjunction with any other antenna or transmitter. Bluetooth is a registered trademark of Bluetooth SIG All other trademarks are property of their respective companies.

Manufactured By: ESI Cases & Accessories
44 East 32nd Street
New York, NY 10016
Tech Support:212-883-8838
TechSupport@ESICellular.com

Documents / Resources

| billboard BB2732 2x8 Inch Portable Party Speaker [pdf] Instruction Manual
BB2732, 2AQBE-BB2732, 2AQBEBB2732, BB2732 2x8 Inch Portable Party Speaker, BB2732, 2x8 Inch Portable Party Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>