Billboard Bluetooth 5.0 True Wireless Stereo Sport Earhooks User Manual
- June 4, 2024
- Billboard
Table of Contents
Billboard Bluetooth 5.0 True Wireless Stereo Sport Earhooks
Specifications
- BRAND: Billboard
- MODEL NAME: Billboard True Wireless Sport Earhooks with Charging Case
- COLOR: Black with Red
- FORM FACTOR: Over-Ear
- CONNECTIVITY TECHNOLOGY: Bluetooth
- BLUETOOTH: 5.0
- PLAYTIME: 2 hours
- PACKAGE DIMENSIONS: 5.75 x 4.45 x 1.85 inches
- ITEM WEIGHT: 3.91 ounces
- BATTERIES: 3 Lithium Ion batteries
- SPECIAL FEATURES: Sports & Exercise
- OTHER DISPLAY FEATURES: Wireless
Introduction
Utilize the Billboard Bluetooth True Wireless Sport Earhooks with Charging Case to give your music chart-topping sound quality. These true wireless stereo (TWS) earphones use Bluetooth 5.0 technology, which enables them to deliver powerful bass and rich music for up to 2 hours of playback. The cordless design and built-in microphone allow for hands-free calling, and the clever noise cancellation and lossless audio transmission ensure that your favorite music and podcasts will sound their best while you listen. You can quickly change tunes, answer and end calls, and voice-prompt Siri on iOS devices using the handy touch control on the side of each earpiece. These earbuds offer easy pairing with your phone, MP3 player, laptop, tablet and other devices thanks to their auto pair and auto power on features.
When worn at the office, at home, at the gym, when running outside, or while travelling, the contoured design with behind-the-ear hooks and ear gels ensure a secure fit. For easy recharging and storage in your gym bag or backpack while not in use, the supplied case can charge the headphones up to three times (for up to six extra hours of playback). When in the case, this small set of wireless earbuds measures 3″ x 4.5″ x 1.5″ so you can listen to music wherever you go.
WHAT’S IN THE BOX
- TWS earphones
- Charging case
- USB charging cable
- user manual
HOW TO PAIR
The earbuds’ indicator lights start to blink red, indicating that they are ready for pairing. Open up your phone’s Bluetooth settings after the lights start blinking. The “BB-BT-EB” branding will appear on these TWS earphones. To connect, click.
HOW TO CHARGE
Use the included charging cable to connect the case to a suitable USB power source for charging. The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged.
HOW TO CHARGE WITHOUT CHARGING CASE
You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro USB. After that, you must wait while your earbuds fully charge.
HOW TO TURN OFF
- When you remove the earphones from the charging case, they should automatically come on; if not, long press the MFB to turn them on.
- To turn the power off, long press the Multifunction button.
Frequently Asked Questions
How long do wireless billboard earbuds last?
The Billboard Bluetooth True Wireless Earbuds with Charging Case will give your music chart-topping sound quality. With its true wireless stereo (TWS) design and cutting-edge Bluetooth 5.0 technology, these earbuds deliver high- quality sound for up to 10 hours of continuous use.
How do you tell when the battery in your true wireless earbuds is full?
After 10 seconds, the earbud’s indicator becomes red, and it turns off when the device is turned off. Fully Powered When electricity is cut off to the charging case, the white indicator on the charging case turns off. You will receive a voice message if the earphones’ battery is low.
How long do the true wireless earbuds from Billboard take to charge?
Like the earphones, the charging case is compact and took around 2 hours to charge. Each time, the earphones needed to be recharged, the charging case needed roughly 30 minutes. You plug the USB micro connector into the case’s rear and then the other end into a power source, such as a power adapter, laptop, etc., to charge the case.
My wireless earbuds won’t switch on; why?
If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things.
Why does one of my earbuds only function?
Look over the settings. Depending on the audio settings on your headset, it might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
Should I always have earbuds on hand?
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
Why do my earbuds have a blue light?
The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern. To see if the flashing blue light stops after your headphones are linked to another device, you might still want to try pairing them with another device. It can indicate interference.
How do you turn off headphones for billboards?
Hold the Multi-Function button down for two seconds to turn the device off, and the LED indicator will go out. Hold down the Multi-Function button for 2 seconds with the headphones off, and pairing mode will be activated. Set the phone to look for wireless devices and turn on the Bluetooth® function.
Have billboard headphones a microphone?
Bluetooth wireless earbuds with controls and a microphone called Billboard in red.
How can you determine whether the Bluetooth headphones for billboards are charging?
During charging, the LED light will become red. The LED light will go out when the battery is fully charged. The charging process takes two to three hours.