Shenzhen Smart Care Technology Gt06 IML Wireless Charging Smart Watch User Manual
- June 6, 2024
- Shenzhen Smart Care Technology
Table of Contents
Shenzhen Smart Care Technology Gt06 IML Wireless Charging Smart Watch User Manual
Getting Started
Welcome to use our IML, this is a smart watch which can help you reach your sport goals. The package includes:
- ML smart watch
- User Manual
- Charging cable
Setting up your IML
First download & install the app SMART-TIME PRO, and create an account to make sure the watch can synchronize the data it collects with the app. The app is where you can set goals, analyse your goals, see historical trends and keep up with friends, and much more.
Connecting smart watch through mobile phone
SMART-TIME PRO APP supports the operating system of iOS 11.0 and Android 5.0,
as well as Bluetooth 4.0. It is available for more than 150 mobile devices.
https://api.iot-solution.net/smart-time-pro/
- After install the App, register and log in account according to a series of instructions.
- Continue following the onscreen instructions to connect or pair your smart watch to your mobile device. Pairing make sure that the watch and mobile device can communicate with each other(sync their data). Open APP>Device> Add device> Choose IML.
- Select the Bluetooth name IML with the strongest signal from the list. Then the watch will show paring notification, click to confirm pairing. Then you will see the Bluetooth icon on the right top on the watch or in quick setting page (slide down page) turns to Blue, then Bluetooth is connected. (You need to use Android 5.0+ or iOS 11.0+ and above and the watch can only be paired with one mobile phone. To pair other mobile phones, please unbind the current one before pairing.)
Quick Fit Strap
IML contains two parts (watch body and wristband), you can purchase separately strap and switch as your preference.
Charging instructions
Charging Turn the watch over, align and attach the charging pins to the magnets gold prongs. You will see the charging icon on the watch screen after 5s. Charging fully may take 2 hours. you will see the battery icon is full if the watch have been fully charged. Please clean the charge interface before charging for fear that the remaining sweat erode gold metal contact or other risks.
Functions
-
Sports
The IML watch supports up to 11 sports modes including: Running, Walking, Cycling, Climbing, Treadmills, Spinning, Yoga, Swimming, Basketball, Football, Badminton.
-
Heart rate
Wearing IML correctly, not too tight or loose, make sure no green light leak, there is two measuring ways: Turn on the heart rate icon on the watch and measuring heart rate by manual. Set automatic monitoring time interval in app (monitoring once every 15/ 30/ 60/ 120 minutes). -
Blood pressure
Wear the watch in a right way, and open the menu–blood pressure, measure it manual. -
Alarm clock
Setting the alarms in APP and sync to watch, maximum 8 alarms.
-
Music control
Control the music player of mobile phone to play the music, as well as song switching and volume adjustment.
-
Stopwatch
Electronic timer that can record one time or record multiple times.
-
Countdown
The same way to calculate the remaining time. -
Remote capture
This feature can remote control the mobile camera to take pictures, please click – smart camera and turn on the camera.
-
Find phone
Under Bluetooth connection, click “Find phone” on the watch, the phone ringing, click pause to stop. -
Settings
Set the watch’s general functions, brightness, language, power off, return to factory, about. -
Sports records
Sports mode records was done, maximum 10 records, update automatically.
-
Other functions 1) Change watch face (Long press the screen or power button, swipe to choose, click to confirm)
The specification
Troubleshooting
Heart-rate signal missing
The IML smart watch keeps paying attention to your heart rate data during your
exercise and your daily life. Sometime the watch may not get a suitable heart
rate signal. At this time, the missing heart rate data will appear at the
dotted line.
If you can’t get the heart rate signal, first you should confirm that you wear
the watch correctly, adjust it to avoid being too high or too low, neither too
tight or too loose on your wrist. After adjustment, turn on real-time heart
rate monitoring to get the data. If there is still no heart rate data, check
if the heart rate monitoring function is turned on at SMART-TIME PRO App.
Other problems
If your mobile cannot pair the watch, click Settings Bluetooth in your mobile
and check if there is signal of IML. If yes, it means there is no problem with
the Bluetooth signal. Please check if the watch is paired with other phones,
please unbind it. IOS device users should click Setting – Bluetooth ignore
this device and then pair it.
Exemption Clause
- The Heart rate, Blood pressure data output by IML are not intended to be a medical or diagnostic basis.
- Self-diagnosis and self-treatment are dangerous. Only qualified physicians are allowed to diagnose and treat high blood pressure or any other heart diseases. Please contact your physician for more professional diagnostic opinions.
- The data and information of heart rate and blood pressure provided by IML may not be completely accurate and may exceed the tolerance as per the specification stated in the document due to deferent factors, such as interference with signal from external sources, incorrect wearing position and changes in weather conditions or user’s body condition.
- DO NOT adjust any of your medication or therapeutic schedule based on the results output by IML. Please follow the doctor’s instructions before taking any treatment or medication. We disclaim all liability arising from such inaccuracy and assumes no responsibility for the consequences of use of such data and information.
Warranty Clause
Our company always pursues the service concept of “creating value for customers” We offer 1year warranty period for IML smart watch. If there is any damage or malfunction during normal use, the warranty service will be provided to the customer for free after confirmation by our technician. The following conditions are not covered by the warranty:
- A. Accident or human damage
- B. Testing, repairing or disassembling without authorization
- C. Contamination due to human reasons
- D. Damage caused by connection with equipment which is not compatible
- E. Natural aging
- F. Damage caused by force majeure
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>