FLAMMA FC21 Analog Comp Pedal Owner’s Manual
- June 8, 2024
- FLAMMA
Table of Contents
FLAMMA FC21 Analog Comp Pedal
Precautions
Please read carefully before proceeding
Power Supply
Please connect the designated adapter to an AC outlet of the correct voltage,
Please be sure the adapter supplies 9V DC,center negative. Unplug the adapter
when not in use or during electrical storms. Use only the original power
supply.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Followall instructions.
- Do not use this a pparatus near water.
- Clean only with a dry cloth.
- Do not install nearany ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparati (including amplifiers)that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade of the third prong are provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Classic optical compressing effect with smooth attack and decay
- Nice dynamic performance
- Compact size with metal shell
- True bypass circuit
Features
- Footswitch: Press to turn on or off the pedal.
- LED Indicator: Indicates the On or Off status of the pedal.
- DC IN: For connecting to power supply.
- INPUT: 1/4″ mono audio jack.
- OUTPUT: 1/4″ mono audiojack.
- VOLUME: Rotate to adjust the volume level of compressor.
- EQ: Rotate to adjust the EQ
- COMP: Rotate to adjust the intensity of compressor.
Specifications
- INPUT: 1/4″ mono audio jack (impedance value: 47Ok ohms)
- OUTPUT: 1/4″ mono audio jack (impedance value:lk ohms)
- Power Requirements: 9V DC (center negative)
- Current Draw: 10mA
- Dimensions: 47mm (D) x 83mm (W) x 52mm (H)
- Weight: 160g
- Accessories: Owner s manual
Shenzhen Flamma Innovation Co., Ltd Made in China
Read User Manual Online (PDF format)
Loading......