AURA DRL Halo RGB Dodge Challenger 08-22 Installation Guide
- June 8, 2024
- Aura
Table of Contents
AURA DRL Halo RGB Dodge Challenger 08-22
COMPONENTS
INSTALLATION
-
STEP 1: Open the hood.
-
STEP 2: Wrap the LED strip into a circle shape and firmly press into place inside of the intake hole to secure.
AND / OR
-
STEP 2: Attach the strip as pictured as an alternate method of install.
-
STEP 3: Remove the plastic covers on the right and left side of the engine bay
-
STEP 4: Run the wires along the front brace and connect to the control box.
-
STEP 5: Connect the positive wire to a constant (always on) or accessory (only when the car is on) circuit in the fuse box by using an included fuse tap.
-
STEP 6: Connect the negative wire to a ground source, such as the one circled in the picture.
-
STEP 7: Test for function.
As shown below, connect all light pods to the control box with the included extension cables.
-
IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.- Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.
- or connect the positive wire to the fuse tap and connector the open negative wire to a ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.
WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will not exceed 85C or 185F.
REMOTE CONTROL
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box. All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS & Android Compatible).
DISCLAIMER
- OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
- If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
- OPT7 recommends installation for safety and guidance.
- Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.