HOFTRONIC Napels Wifi Bluetooth Smart Downlights Instruction Manual
- June 8, 2024
- HOFTRONIC
Table of Contents
HOFTRONIC Napels Wifi Bluetooth Smart Downlights
Please read these instructions and retain them for future reference.
IMPORTANT INFORMATION
It is recommended that the fittings are installed by a qualified electrician
ensuring the installation complies with current IEE wiring regulations & local
building control. These products are designed for connection to a 220-240V
mains supply. Always switch off mains supply before installation.
DOWNLOAD APP HERE
-
Download Hoftronic Smart App – Scan the QR code on the right to download the Hoftronic Smart App. You can also search “Hoftronic Smart” in either Apple App Store or Google Play to install the App.
-
Register a Hoftronic Smart account and sign in the App – You will be prompted to enter your mobile number or email address to register. The system automatically recognises your country / area. You can also select your country code. Note: If you use a Mobile number you will be sent a text message with your confirmation code to complete your account registration.
-
Add lamp to Hoftronic Smart App – Tap the icon “+” on the top right corner of “Home” page, choose ‘Lighting’ and your device type – Smart light (WIFI+BLE), then follow the instructions to connect the lamp. The lamp needs to be set to flash rapidly. Please follow Step A and B below:
Step A
Turn On-Off-On-
Off-On-Off-On
Keep time interval not too short. Turn off after light is on.
Step B
Confirm light bulb is now rapidly flashing (2x per second) 2x per second Confirm indicator rapidly blink -
Enter Wi-Fi password, then connect. Make sure your router, mobile and lamp are as close as possible.
-
After connection, the lamp will appear in your list and you can control it from anywhere in the world. You can also rename the lamp and group more lamps.
INSTALLATION INSTRUCTIONS
Minimal distance to flammable material in the beam direction
SAFETY INSTRUCTIONS
- Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
- This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
- This product may NOT be installed by minors or people with a mental disability.
- This downlight must be installed to the current edition of the IEE wiring regulations and relevant building regulations in your country.
- The product should NOT be covered with insulation material at any time. Unless using a model with an insulation guard.
- Check that the total load of the circuit, including when this downlight is fitted, does not exceed the rating of the circuit table, fuse of circuit breaker.
- Make sure that 50mm above and around the downlight is free airflow.
- The downlight should not be installed within 50mm of any joints.
INTENDED USE / APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
Product can be used both indoors and outdoors
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended. This labelling indicates the requirement to selectively collect
waste electronic and electrical equipment. Products labelled in this way must
not be disposed of in the same way as other waste under the threat of a fine.
These products may be harmful to the natural environment and health, and
require a special form of recycling/neutralising. Products labelled in this
way should be returned to a collection facility for waste electrical and
electronic goods. Information on collection centres is provided by local
authorities or sellers of such goods. Used items can also be returned to the
seller when new product is purchased, in quantity no larger than the purchased
item of the same type. The above rules regard the EU area. In the case of
other countries, regulations in force in a given country must be applied.
Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
For more information about Hoftronic Smart products visit
www.hoftronicsmart.com. Hoftronic Smart shall
not be responsible for any damage resulting from the failure to follow these
instructions. Hoftronic Smart reserves the right to make changes in the manual
– the current version can be downloaded at
www.hoftronicsmart.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union. The product complies with all applicable regulations and rules
in the country of sale. Formal documentation such as the declaration of
conformity, the safety data sheet and the product test report is available
upon request.
CE DECLARATION
The product complies with the following directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon
request.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>