SCANGRIP 03.6002 Work Lights Instruction Manual

03.6002 Work Lights

Product Information: NOVA 10 SPS

The NOVA 10 SPS is a high-performance work light designed for professional use. It comes with an SPS battery 8Ah (item no. 03.6004) and a built-in power bank with a USB outlet to charge mobile devices. The light features a high- efficiency COB LED that provides bright illumination with a maximum output of 10000lm@100%.
The light output can be adjusted to 75%, 50%, and 25% using the control buttons. The light also has an internal backup battery of 7.4V/1000mAh that provides backup power for up to 1 hour at 10%/1000lm and 2 hours at 80%. The light is IP67 rated, which means it is dust-tight and can withstand water immersion up to 1 meter for 30 minutes. The product dimensions are 305x290x125 mm, and it weighs 3.6 kg.

Light Control App
The NOVA 10 SPS comes with an integrated Bluetooth light control feature that allows you to turn the lamp on/off or adjust the lamp output using your mobile device. You can also connect up to 4 lamps together and assign a pin code to prevent other users from controlling the lamp. The light control app is compliant with iPhone 5 or higher / Android 5.0 or higher. You can download the app from the iTunes App Store or the Scangrip website.

Product Usage Instructions

• Register the product by visiting scangrip.com

• Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents

• Avoid looking directly into the beam of light, as this will result in dazzling

• Do not use the lamp near a naked flame

• Protect the mains cable from oil, heat, and sharp edges

• Only use SCANGRIP SPS battery packs. The internal backup battery must be replaced with an original SCANGRIP battery

• Do not leave the battery flat, as this could render it incapable of being charged again

• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced

• Luminaire is only suitable for direct mounting on non-combustible surfaces

• If the lamp is disconnected from mains and the battery is discharged, push the power button to enable internal backup battery. 10% LED will blink to indicate backup mode

• The red charging indicator lights up during charging

• The green charging indicator lights up when charging is completed

• To delete the pin code, turn on the Bluetooth function and press the Bluetooth button for 10 seconds. The pin code will be reset

• The power bank will automatically shut down when the battery pack is discharged or removed. When using the power bank while the power supply is connected, the luminous output will be reduced to 75%

• Dispose of discarded electrical products at recycling facilities. Ask your local authority or retailer for advice on recycling. The battery must be removed from the device before it is broken up. The device must be disconnected from the mains when the battery is removed. Please dispose of the battery safely.

• go to scangrip.com to register

WARNING / BATTERY TIPS

• Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents
• Avoid looking directly into the beam of light, as this will result in dazzling
• Do not use the lamp near a naked flame
• Protect the mains cable from oil, heat and sharp edges
• Only use SCANGRIP SPS battery packs. Internal backup battery must be replaced with an original SCANGRIP battery
• Do not leave the battery flat, as this could render it INCAPABLE of being charged again
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
• Luminaire is only suitable for direct mounting on non-combustible surfaces
• The luminaire is designed to work with all SCANGRIP SPS battery packs. Likewise, the battery chargers can be used to power the luminaire
  If the lamp is disconnected from mains and the battery is discharged, push the power button to enable internal back up battery. 10% LED will blink to indicate back up mode
  The red charging indicator lights up during charging
  The green charging indicator lights up when charging is completed

The process to delete the pin code is:

• Turn on the Bluetooth function
• Press the Bluetooth button for 10 second
• The pin code is reset

Integrated BLUETOOTH light control

• Turn lamp on/off or adjust lamp output
• Connect up to 4 lamps together
• Assign pin code to prevent other users from controlling the lamp

Compliant with iPhone 5 or higher / Android 5.0 or higher. Go to iTunes App Store / Download the app from our website

Power bank

• Built-in power bank with USB outlet to charge mobile devices
• Output: 5V, 1A

The power bank will automatically shut down when the battery pack is discharged or removed. When using the power bank while the power supply is connected, the luminous output will be reduced to 75%.

Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.

• The battery must be removed from the device before it is broken up
• The device must be disconnected from the mains when the battery is removed
• Please dispose of the battery safely

MANUFACTURER’S WARRANTY – Information for customers in Australia and New Zealand only This SCANGRIP product is guaranteed for a period of 2 (two) years from date of purchase. This guarantee shall become invalid if the product has been misused, tampered with or accidentally damaged.
If the product is defective, we undertake to repair or replace the product or any part of it that is defective; or wholly or partly recompense you if they are defective.
This guarantee is in addition to other rights and remedies available to consumers, all of which are given by us to you if you are a consumer. Our goods come with guarantees that cannot be excluded under the Australian or New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you wish to make claim, please return this product to the original place of purchase together with your purchase receipt or go to our website www.scangrip.com and fill out the claim form.

SCANGRIP.COM

DESIGNED BY SCANGRIP IN DENMARK

// SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK

References

• Europe’s leading manufacturer of LED work lights

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>