SCANGRIP Sunmatch 4 Rechargeable and Handy LED Work Light User Manual
- June 2, 2024
- SCANGRIP
Table of Contents
SCANGRIP Sunmatch 4 Rechargeable and Handy LED Work Light
USE
Activate the CCT SCAN function to sweep stepless in the interval from 2500K to
6500K. At any point, the CCT SCAN function can be locked. * go to
scangrip.com to register
To save battery and avoid the risk of overheating an intelligent built-in system switches turn the lamp to low mode after 3 minutes of use at high mode.
FEATURE
// SCANGRIP A/S Rytterhaven 9 DK-5700 DENMARK
WARNING
- Always respect applicable legislation for working with electrical equipment to reduce the risk of accidents.
- Avoid looking directly into the beam of light, as this will result in dazzling.
- Do not use the lamp near a naked flame.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
USE
- Press the on/off button to turn the lamp on in the sequence: Main > Spot > Off.
- Press and hold the on/off button while the main light is on to start dimming. Release, press, and hold again to increase.
- At the lowest and highest levels, the light will flash until the button is released.
- When the lamp is turned off the lamp will remember the setting of the main light.
- When the light is on, press the CCT SCAN button to change the color temperature manually.
- When the light is on, press and hold the CCT SCAN button for 2 seconds to activate the CCT SCAN mode.
- When in CCT SCAN mode, press the CCT SCAN button to pause the CCT SCAN mode.
- When in CCT SCAN mode, press and hold the CCT SCAN button for 2 seconds to deactivate CCT SCAN mode. When in CCT Scan mode, the CCT indicator corresponds to the following color temperature ranges: 25: 2500-3300K, 35: 3301-4100K, 45: 4101-4900K, 55: 4901-5700K, 65: 5701-6500K.
- To save battery and avoid the risk of overheating an intelligent built-in system turn the lamp to low mode (250 lumen) after 3 minutes of use at high mode (500 lumens).
CHARGING / BATTERY
- During charging, the 4 led bars will indicate the level of charge in red color. When fully charged, all 4 led bars will light up with green color.
- Battery capacity indicator: when the lamp is OFF, press and hold on/off button for 2 sec. (Capacity indicator function is disabled when the lamp is on).
- Use 5V, 1A USB charger.
- Always replace the battery with a new one of the same type and grade.
- Don’t leave battery discharged. Otherwise, it could be over-discharged and may NOT be able to be recharged.
Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.
- The battery must be removed from the device before it is broken up.
- The device must be disconnected from the mains when the battery is removed.
- Please dispose of the battery safely.
MANUFACTURER’S WARRANTY
Information for customers in Australia and New Zealand only
This SCANGRIP product is guaranteed for a period of 2 (two) years from date of purchase. This guarantee shall become invalid if the product has been misused, tampered with or accidentally damaged. If the product is defective, we undertake to repair or replace the product or any part of it that is defective; or wholly or partly recompense you if they are defective. This guarantee is in addition to other rights and remedies available to consumers, all of which are given by us to you if you are a consumer. Our goods come with guarantees that cannot be excluded under the Australian or New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you wish to make claim, please return this product to the original place of purchase together with your purchase receipt or go to our website www.scangrip.com and fill out the claim form.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>