VOLVO Tablet Case Installation Guide
- June 9, 2024
- VOLVO
Table of Contents
VOLVO Tablet Case Installation Guide
The specifications, constructional data and illustrations contained in this publication are not binding. We reserve us the right to make alterations without priornnotification.
SKYDDANDE RAM
Preparation
IMPORTANT
- Do not fold the protective film.
- Do not touch the self-adhesive side of the protective film; this would impair theadhesion of the film
WARNING
In the event of an accident the tablet screen may break. A broken screen may causepersonal injury if the tablet does not have protective film
NOTE
This product must be used together with bracket and tablet holder.
Installation
See illustration 1
-
Clean the tablet’s screen using the enclosed polishing cloth. The screen needs to be free of dust, dirt and any grease for the protective film to have good adhesion.
-
Remove the protective plastic from one side of the screen protector.
-
Position the screen protector on the tablet.
Use the plastic scraper to press out all of the air between the screen and the screen protector. -
Remove the protective plastic from the upper side of the protective film.
-
Polish the protective film using the enclosed polishing cloth
NOTE
To remove small air bubbles, carefully press them out towards the edges using the enclosed scraper.
See illustration 2.
- Fit the tablet in the tablet case.
- Raise the edges so that the whole tablet is positioned in the tablet case.
WARNING
To avoid personal injury, the holder must be removed when the tablet is not mounted in the bracket.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>