FLASH F7100552 LED Moving Head User Manual

June 9, 2024
FLASH

FLASH F7100552 LED Moving Head

FLASH-F7100552-LED-Moving-Head-product

INTRODUCTION

Thank you for purchasing LED MOVING HEAD 36x10W RGBW 4in1 ZOOM 3 SECTIONS. For safety reasons and to ensure the trouble-free operation, carefully read the instructions.

SAFETY INFORMATION

  • Installation should be done by qualified personnel in order to minimize the risk of accidental electric shock
  • Disconnect the power supply before installation.
  • Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice any signs of damage you should contact your dealer immediately. Do not connect the device to the mains.

PRODUCT INFORMATION

  • Power consumption: 360W
  • Power supply voltage: 110 – 230V
  • Voltage frequency: 50/60Hz
  • Diode type: 4in1
  • Number of diodes: 36
  • Diode power: 10W
  • Display: Color LCD
  • Color: RGBW
  • ZOOM: YES
  • Dimming: Linear: 0 – 100%
  • Flash frequency (min): 0Hz
  • Flash frequency (max): 20Hz
  • PAN range: 630°
  • TILT range: 270°

INSTALLATION

After removing the packaging, check if the device was not damaged during transport. Before connecting to the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage caused by unstable mounting.

  • Do not use the device in high humidity conditions and at temperatures above 40° C
  • To avoid damage please don’t use organic solvents to clean the fixture shell.
  • The device must be installed on stable structures
  • It should be installed in a well-ventilated place, at a distance of 15cm or more from the walls. Please check if the fan and ventilation holes are unobstructed.
  • Number of DMX channels: 15/23/32
  • DMX standard: DMX 512
  • Control interface: 4 buttons
  • AC IN: powerCON
  • AC OUT: powerCON
  • DMX IN: XLR – 3 pin
  • DMX OUT: XLR – 3 pin
  • IP Rating: IP20
  • Housing made: ABS
  • Cooling: Active
  • Net Weight: 8,8kg
  • Dimensions: H(44 )xW(33)xD(22) cm
  • Dim. (case): H(64/53,5/ )xW(55)xD(87) cm
  • Weight (case): 64,6kg

Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are consistent with device requirements. All activities, including connecting the device to the mains must be performed by qualified personnel.

CONNECTION

The device is equipped with the following interfaces:

  1. DMX (in/out): XLR 3-pin socket
  2. Power (in/out): powerCON socket

Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.FLASH-F7100552-LED-Moving-Head-fig 2

Voltage specification

Input Voltage Total Power Frequency
100~230V 360W 50/60Hz

Connecting power supply
The connection is performed using power cable with powerCON connector (included). The device must be operated by qualified personnel. Make sure that the power grid supply parameters are consistent with device parameters and limitations are not exceeded.

CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the manufacturer or by a person with appropriate permissions.

OPERATION MANUAL

Control panel

The control panel is equipped with LCD display and 4 control buttons with the following functions:

  1. MENU – choose function
  2. DOWN – change value
  3. UP – change value
  4. ENTER – confirm changes

DMX CHANNEL LIST

CH15 Mode

CH Function Value Description
1 Pan X 0-255 0-630°
2 Pan X fine 0-255 0-270°
3 Tilt Y 0-255
4 Tilt Y fine 0-255
5 XY Speed 0-255 Speed (Fast to Slow)
6 Zoom 0-255 Slow to fast
7 Dimming 0-255 0-100%
8 Strobe 0-15 No
    16-255 Slow to Fast
9 Auto 0-15 No
    16-255 Auto
10 Speed 0-255 Slow to Fast
11 Red 0-255
12 Green 0-255
13 Blue 0-255
14 White 0-255
15 Empty 0-255

CH23 Mode

CH Function Value Description
1 Pan X 0-255 0-630°
2 Pan X fine 0-255 0-270°
3 Tilt Y 0-255
4 Tilt Y fine 0-255
5 XY Speed 0-255 Speed (Fast to Slow)
6 Zoom 0-255 Slow to fast
7 Dimming 0-255 0-100%
8 Strobe 0-15 No
    16-255 Slow to Fast
9 Auto 0-15 No
    16-255 Auto
10 Speed 0-255 Slow to Fast
11 R1 0-255 Red Ring 1
12 G1 0-255 Green Ring 1
13 B1 0-255 Blue Ring 1
14 W1 0-255 White Ring 1
15 R2 0-255
16 G2 0-255
17 B2 0-255
18 W2 0-255
19 R3 0-255
20 G3 0-255
21 B3 0-255
22 W3 0-255
23 Reset 0-127/128-255 No/Reset

CH24 Mode

CH Funtion Value Description
1 Pan X 0-255
2 Pan X fine 0-255
3 Tilt Y 0-255
4 Tilt Y fine 0-255
5 XY Speed 0-255
6 Zoom 0-255
7 Dimmer 0-255
8 Strobo 0-255
9 Dimmer fine 0-255
10 R1 0-255 Red Ring 1
11 G1 0-255 Green Ring 1
12 B1 0-255 Blue Ring 1
13 W1 0-255 White Ring 1
14 R2 0-255 Red Ring 2
15 G2 0-255
16 B2 0-255
17 W2 0-255
18 R3 0-255
19 G3 0-255
20 B3 0-255
21 W3 0-255
22 Macro Color Manual 0-9 Empty
    10-70 Red/Green
    71-99 Geen/Blue
    100-170 Blue/Magenta
    171-190 Red
    191-249 Blue
    250-255 White
23 Macro Color 0-9 Empty
    10-19 Red
    20-29 Green
    30-39 Blue
    40-49 White
    50-59 Limon
    60-69 Magenta
    70-79 Cyan
    80-89 White
    90-99 Macro 1
    100-109 Macro 2
    110-119 Macro 3
    120-129 Macro 4
    130-139 Macro 5
    140-149 Macro 6
    150-159 Macro 7
    160-169 Macro 8
    170-178 Macro Pulse 1
    179-187 Macro Pulse 2
    188-196 Macro Pulse 3
    197-214 Macro Pulse 4
    215-223 Macro Pulse 5
    224-232 Macro Pulse 6
    233-241 Macro Pulse 7
    242-250 Macro Pulse 8
    261-255 Macro Pulse 9
24 Speed Macro Color  
25 Macro Control  
26 Empty  
27 Empty  
28 Empty  
29 Empty  
30 Empty  
31 Empty  
32 Reset / Macro 0-49 Macro 1
    50-251 Demo 1
    252-255 Reset

www.flash-butrym.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FLASH User Manuals

Related Manuals