allen roth 81037 Everidge Lighting and Ceiling Fans Instruction Manual

October 28, 2023
Allen+Roth

allen roth 81037 Everidge Lighting and Ceiling Fans

ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Thank you for purchasing this Allen + Roth product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

PREPARATION

Before beginning the assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

  • Estimated Assembly Time: 10 – 15 minutes

TOOLS REQUIRED

Visit Lowes.com for more information.

PACKAGE CONTENTS

allen-roth-81037-Everidge-Lighting-and-Ceiling-Fans-fig-
\(2\)

  • Lampholder Ring (Preassemble)
  • Screw (Preassemble)

HARDWARE CONTENTS

Note: Hardware shows actual size.allen-roth-81037-Everidge-Lighting-
and-Ceiling-Fans-fig- \(3\)

INSTALLATION OVERVIEW

allen-roth-81037-Everidge-Lighting-and-Ceiling-Fans-fig-
\(4\)

Connect wiring: WHITE to WHITE, BLACK to BLACK, BARE/GREEN to BARE.

  • Make sure no bare wire or wire strands are visible after making connections.
  • Consult an electrician if wiring needs differ.

A can be installed with the socket facing up or down.

  • Do not overtighten Das shade may crack or break.allen-roth-81037-Everidge-Lighting-and-Ceiling-Fans-fig- \(8\)

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The fixture does not light. 1. The bulb is burned out.

2. The power is off.

3.Faulty wire connection.

4. Faulty switch.

| 1. Replace the bulb.

2.  Make sure the power supply turns on.

3.  Check wiring.

4.  Test or replace the switch.

CARE AND MAINTENANCE

  • Shut off the main power supply before performing any maintenance on the light.
  • Wipe with a damp cloth or use window cleaner. Do not use abrasives.

WARRANTY

The manufacturer warrants this product against defects in materials and workmanship for three (3) years from the date of purchase. If within this period
the product is found to be defective in material or workmanship, please contact the manufacturer. A copy of the original sales receipt will be required as
proof of purchase. The manufacturer will, at its option, repair or replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

  • Before beginning installation, turn off the electricity at the circuit junction box or the main fuse box.
  • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. Doing so may damage or cut the wire insulation, which could cause serious injury or death from electric shock.

CAUTION

  • All electrical connections must be in agreement with local codes, ordinances or the national electric code(NEC). Contact your municipal building department to learn about your local codes, permits, and/or inspections.
  • Consult a qualified electrician before installation.

Visit Lowes.com for more information.

Printed in China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Allen+Roth User Manuals

Related Manuals