Baseus PPCXM20 Power Bank User Manual
- June 9, 2024
- Baseus
Table of Contents
Baseus PPCXM20 Power Bank
Warnings
Improper use of the product may lead to battery malfunction or severe overheating, and may even cause fire or explosion. To avoid any damage to you and your property, please follow the instructions below when you use and store the product.
- This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
- lease charge this product with a charger approved by the local safety standards in case of danger or damage.
- DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
- If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
- Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
- This product CAN NOT be disassembled ,applied pressure ,pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60°C).
- DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight Orin a vehicle with a very high interior temperature.
- This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
Attention
- Please fully charge this device before using it for the first time.
- The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity.
- Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
- Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
- Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity.
- If the indication does not light up after pressing the power button, please recharge this product
- Please preserve this product with a battery percentage between 25%-50%for long-term storage. Place this product in a cool and dry environment. To slow down battery aging .avoid storing this product in an empty or full charge for long-term storage.
- Please do not dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which outcome Pany will not bear any legal responsibilities nor offer any guarantee. Please understand.
- There must’ t be any metal objects or materials (like iron plates, rings, metal phone case, etc.) between the back of the charging phone and the charging area during wireless charging.
- During wireless charging, if disconnection or serious overheating occurs, it may be that the receiving coil of the charging phone is not completely aligned with the wireless charging coil, or if there is metal object in the phone case. Please try to cool down the phone first, remove the protecting case, and then align it to the correct position.
Specifications
Name: Power Bank
Model No.: PPCXM20
Battery: Polymer Lithium Battery
Power Capacity: 20000mAh /74Wh
Rated Capacity: 12000mAh (5V⎓2.4A)
Energy Conversion Rate: ≥75%
Type-C Input: 5V⎓M; 9V⎓2A
Type-C Output: 5V⎓2.4A;9V⎓2.22k, 12V⎓1.5A
Wireless Output: 5W/7.5W/10W/15W
Total Output 5V⎓2.4A
Product Size: 111.3X70.4X30.9mm
Product Weight: About 12.7oz
Content
- Power Bank x 1
- User Manual x 1
- Warranty Card x 1
- Charging Cable x 1
Product Schematic Design
Product Description
This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products. The product has auto-alignment for charging, and supports Apple20W PD fast charging, Type-C dual-way fast charging, 15Wwireless fast charging, etc. It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits.
Use Environment
- Working Temperature: Non-tropical areas, 0°C to 35°C
- Storage ambient temperature: 0°C to 40°C
Icon Description
The5-year icon refers to the “valid environment-friendly use period’, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of” environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Operation Instructions
When charging wirelessly:
This product has an auto-wake function for wireless charging, just place your
phone onto it, and it will automatically start charging. But for some phones,
due to compatibility issues, the wireless charging function needs to be
activated by pressing the button. Press it once, the battery indicator will
light up and the wireless charging is turned on, and you can place your device
on. If there’s no load connected for the wireless charging in 30s, the product
will automatically shut off the wireless charging function.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
| Part Description | Toxic or hazardous substances and elements © |
|---|---|
| Lead (Pb) | Mercury ( Hg) |
| Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) |
| PCB | ✖ |
| Electrode | ○ |
| Battery | ✖ |
| Casing | ○ |
○ This form is compiled in accordance with SJ/T 11364. 0: It indicates that
the content of the toxic and harmful substance in all homogeneous materials of
the component is below the limit specified in GB/T 26572 standard.
✖: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning Please follow the above safety instructions otherwise it will cause fire, electric shock damage or other damage.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB/T 35590-2017
Hotline: +86-4000-712-711 Website:
www.baseus.com
Designed by Blasius
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>