TESLA Smart Sensor Temperature and Humidity Display User Manual
- June 9, 2024
- Tesla
Table of Contents
TESLA Smart Sensor Temperature and Humidity Display User Manual
Product Description
Network Setting
- Power on the product.
Rotate the battery cover counterclockwise to open it.
Put in 2 AAA batteries.
2. Press the setting button for 5s, the signal icon flashes, the detector is in network setting status.
Network Setting note:
- Press the button for 5s-10s, when signal icon flashes fast, release the button for network setting. It will last for 20s, and the signal icon keeps on flashing. If pressing for more than 10s, network setting is cancelled. The signal icon will stay to indicate network setting succeeds. If fails, the signal icon will disappear.
Installation Instructions
Method 1: Use a 3M sticker to fix the product to the suitable position.
Method 2: Place the product on the support.
Technical Parameters
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-SEN- TAHLCD is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.412 – 2.472 MHz
Max. radio-frequency power (EIRP ): < 20 dBm
TESLA SMART
SENSOR TEMPERATURE
AND HUMIDITY DISPLAY
Manufacturer
Tesla Global Limited
Far East Consortium Building,
121 Des Voeux Road Central
Hong Kong
www.teslasmart.com