edishine 12273 Modern Wood Corner Floor Lamp User Guide
- June 4, 2024
- edishine
Table of Contents
User Guide
12273
Made in Chin
12273 Modern Wood Corner Floor Lamp
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain them for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all the required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over-tighten the screws and bolts as this may damage the threads.
When you have finished assembling the product, place it on a flat surface and
make sure it is stable before use.
Do not let children play with this product.
DANGER
Risk of suffocation! Keep any packaging materials away from children.
Cleaning & Maintenance
Keep the product away from direct heat and sunlight.
Prolonged exposure to heat sources may cause glazing, melting, and scorching,
or even cause the color to fade.
Regular vacuuming or light brushing helps to remove dirt and prevent soil
build-up, which increases the appearance of wear.
Periodically (every 90 days) make sure that the screws are fully tightened.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock. Disconnect from the power source before
assembling or cleaning.
Switch off, unplug and allow the bulb to cool before replacing the bulb or
cleaning.
Use a soft clean dry cloth that will not scratch or smudge the surface when
cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause a fire.
Do not plug the product in if the cord is torn or frayed.
CAUTION – IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug.
Contents
Before getting started, ensure the package contains the following components:
Assembly
| 
---|---