sensio Gatsby SE30695P0 Rectangular Illuminated Art Deco Bathroom Mirror Instruction Manual
- June 1, 2024
- Sensio
Table of Contents
sensio Gatsby SE30695P0 Rectangular Illuminated Art Deco Bathroom Mirror
Product Information
- Brand: Gatsby
- Model Number: SE30695P0
- Suitability: Suitable for installation in Zone 2 or higher, unless fitted with a shaver socket which must be located outside of Zones 0, 1, and 2.
- Product Wattage: 44W
- Demister Pad: 25
- IP Rating: IP44
- Input Voltage: 210-240V
- Light Source Energy Efficiency Grade: F
- Color Temperature: 2700K – 6500K
Specifications
- Included: 1 x Tray, 1 x Motion Sensor, Cable Exit
- Dimensions: 600mm x 410mm x 10mm
Usage Instructions
Safety Instructions
- Read all instructions carefully before proceeding.
- Consult a qualified electrician for installation.
- Installation must comply with current IEE wiring regulations (BS7671).
- Product is for indoor use only and should be kept away from moisture.
Maintenance
- Disconnect power before cleaning.
- Clean periodically with a cloth.
- Avoid using harsh chemical solvents to prevent damage to the finish.
Frequently Asked Questions (FAQ)
-
Q: Can the light source in the product be replaced?
A: Yes, the light source can be replaced. However, it should not be removed as it may get damaged. -
Q: What should I do with the product at the end of its life?
A: The product should not be treated as household waste. Please hand it over to the appropriate collection point for recycling of electrical and electronic waste. -
Q: What is the recommended color temperature range for this product?
A: The color temperature ranges from 2700K to 6500K.
This product is suitable for installation in Zone 2 or higher, unless fitted with a shaver socket as this must be located outside of Zones 0,1 and 2.
Dimension
Included
Operation
Product Wattage
44W
WARNING
Read these instructions carefully before proceeding. Keep these instructions
in a safe place for future reference.
IMPORTANT
We recommend that you consult a qualified electrician. All electrical
Installation must be carried out in accordance with current IEE wiring
regulations (BS7671).
SAFETY WARNINGS
- These products must not be modified in any way or installed in any other way than dictated in these instructions.
- Any modifications may render the product unsafe and will void the products warranty.
- This product is for indoor use only.
- Keep out of moisture and use only in dry rooms.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
The symbol on the product and/or accompanying document, the crossed out wheelie bin, indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.
MAINTENANCE
- Ensure that the power is disconnected prior to cleaning.
- Wipe over with a cloth periodically.
- Do not use harsh chemical solvents, this may discolour or damage the finish.
NOTE
- Please ensure you use an appropriate driver with an adequate max wattage.
- Do not overload the LED Driver.
Sensio Lighting Ltd, Speedwell Road, Castleford, West Yorkshire, United
Kingdom, WF10 5PY EU Rep.: Sensio Lighting Dublin Ltd, The Black Church, St.
Mary’s Place, Dublin, Ireland, D07 P4AX
Tel: +44 (0) 1977 522 020
www.sensio.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>