TESLA TSL-CAM-MINI22S Smart Camera Mini User Manual

TESLA TSL-CAM-MINI22S Smart Camera Mini

WHAT‘S IN THE BOX

• Please consult this checklist for all parts.
• Smart Camera Mini
• Power adapter
• USB cable
• Adhesive tape
• User manual

Blinking red light: awaiting WiFi connection (faster blinking) Blue light solids on: camera running correctly

Blinking blue light: currently connecting (faster blinking)

Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera

(if you have modified settings, they will return to factory defaults)

INSTALL

1. Stick the adhesive tape in the middle of the camera bottom.
2. Put the camera on the clean plane.

CONNECT

Download
Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to download the App . SET UP ROUTER
The router supports 2.4GHz WiFi (doesn‘t support 5GHz) and is connected to the WiFi network. Please set the parameters of the router before connecting to the WiFi network, and record the SSID and password of your WiFi. Please keep the network available
REGISTRATION PROCESS
Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy Policy“ and click „Agree“.
Step 2 Input a legal and valid Mobile number or Email address and click „Continue“. Input the Verification Code, then log in to the app.

QR CODE CONFIGURATION

1. Open the Tesla Smart App, click „Create family“, and you can custo-mize the Family name and related settings.

2. Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add camera.

3. In „Add Device“ this interface,continue to click „next step“, and then you should input your WiFi‘s passwords.
   Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.

4. In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And you can complete the configuration about 30s.

5. When connecting, you should make sure your router, mobile,and camera are as close as possible. When camera added successffully, click „ ****„ you could also DIY the camera‘s name.

SETTINGS

In „Smart Camera“ interface, click „ „,you can set the camera common functions.

FAQ

• Q: The device cannot be previewed properly?
• A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
• Q: Why is it still in the list of devices after resetting?
• A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
• Q: How to cut the camera network to another router?
• A: First remove and reset the device on the App and then configure the device again by the App.
• Q: Why doesn‘t the device identify the SD card?
• A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
• Q: Why I can’t get the notifications with my cell phone App?
• A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

FUNCTIONS

Video flip

• Flip your video stream up or down for maximum flexibility. Motion detection
• Motion sensors will notify you when movement is detected. Record
• Record every moment using high capacity SD card storage. Day & Night
• Powerful night vision means no interruptions, even in complete darkness.

TECHNICAL SPECIFICATION

INFORMATION ABOUT DISPOSAL AND RECYCLING

• This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regu-lations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

• EU DECLARATION OF CONFORMITY

• Hereby, Tesla Global Limited declares that the radio equipment type Mini 7S is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc

• Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n

• Frequency band: 2.400 – 2.4835 GHz

• Max. radio-frequency power (EIRP): < 20 dBm

• Manufacturer

• Tesla Global Limited

• Far East Consortium Building, 121 Des Voeux Road Central Hong Kong

• www.teslasmart.com

• TESLA SMART
  

• CAMERA MINI
  

• Manufacturer
  

• Tesla Global Limited
  

• Far East Consortium Building, 121 Des Voeux Road Central Hong Kong
  

• www.teslasmart.com

Documents / Resources

| TESLA TSL-CAM-MINI22S Smart Camera Mini [pdf] User Manual
TSL-CAM-MINI22S Smart Camera Mini, TSL-CAM-MINI22S, Smart Camera Mini, Camera Mini
---|---

References

• Sign in to your account
• TESLA | Smart home in your hands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>