PYRAMID Honda NC Swingarm Instructions
- June 9, 2024
- PYRAMID
Table of Contents
PYRAMID Honda NC Swingarm
Kit Includes
| 1X | Mounting Bracket | CFK071973 |
|---|---|---|
| 2X | M6 X 16mm Bolts | CBOLM60008 |
| 2X | M5 X 12mm Bolts | CBOLM50003 |
| 2X | Rubber Grommets | CGROM60001 |
| 2X | M6 X 8mm Steel Collars | CSPAM60004 |
| 1X | M6 Steel Washer | CWASM60001 |
| 2X | M5 Plastic Washers | CWASM50001 |
Fitting Instructions
-
Firstly remove the OEM Chainguard. The OEM bolts removed here are not used in the assembly of the Pyramid Hugger.
-
Remove the rear most mounting point of the brake hose guide situated on the right-hand side of the swingarm. The Mounting Bracket fits underneath this brake hose guide, (see Fig 2) be sure to place the M6 Steel Washer inside the mounting point ( marked RED in Fig 2) before refitting the brake hose guide on top of the Mounting Bracket. This prevents the OEM bolt from crushing the brake hose guide.
-
Attach the Pyramid Hugger & Mounting Bracket using the 2X M5 X 12mm Bolts & 2X M5 Plastic Washers.
-
Finally fit the chain guard side of the Pyramid Hugger using the 2X M6 X 16mm Bolts, 2X M6 X 8mm Steel Collars & 2X Rubber Grommets. It is always advised to loosely tighten all mountings before fully tightening.
-
Check all fixings periodically.
Got questions?
sales@pyramid-plastics.co.uk
+44 (0)1427 677990
www.pyramid-plastics.co.uk
Follow us on social media and feel free to leave us a review!
Documents / Resources
|
PYRAMID Honda NC
Swingarm
[pdf] Instructions
Honda NC Swingarm, NC Swingarm, Honda Swingarm, Swingarm
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>