AMEWI AFX-135 Alpine Air Ambulance Hubschrauber Instruction Manual

June 10, 2024
AMEWi

AMEWI AFX-135 Alpine Air Ambulance Hubschrauber

Product Information

Specifications

  • Product Name: AFX-135 ALPINE AIR AMBULANCE
  • Model Number: 25339
  • Manufacturer: AMEWI
  • Operating Frequency: 2460-2475MHz
  • Maximum Transmitting Power: 14dBm
  • Batteries: Remote control requires four 1.5V AA batteries, model uses a 7.4V Li-Po battery (included)

Product Usage Instructions

Safety and Hazard Warnings

  • Always follow the safety guidelines provided in the manual. This product is not suitable for children under 14 years of age due to small parts. Keep fingers away from moving parts to avoid injuries.

Battery Notice & Disposal

  • Ensure proper disposal of batteries with recycling symbols. Do not dispose of batteries in local household garbage. Follow local regulations for battery disposal.

Important Notes

  • Operate the product safely and responsibly. Avoid using the model in adverse weather conditions like rain, snow, or thunderstorms. Signal interference can lead to loss of control.

Precautions

  • Avoid using the model in environments with poor visibility. Liquid damage to electronics can cause irreparable harm.
  • Allow the motor to cool down for 10-15 minutes after use to prevent burn injuries.

Frequently Asked Questions

Q: Can children under 14 years use this product?

A: No, this product is not suitable for children under 14 years of age due to small parts and safety concerns.

Q: What batteries are required for the remote control?

A: The remote control requires four 1.5V AA batteries for operation.

Q: Can I dispose of the Li-Po battery in local household garbage?

A: No, batteries with the recycling symbol should be disposed of in designated collection points following local regulations.

Welcome to AMEWI

  • The Amewi Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany.
  • Our product range includes over 10,000 items. Above all, this includes remote-controlled cars, helicopters, boat, and tank models as well as a wide range of accessories and all necessary spare parts.
  • Our sales network includes over 700 specialist dealers and online retailers across Europe.
  • The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer.
  • Please always contact your dealer in warranty cases.

DECLARATION OF CONFORMITY

  • This product has been manufactured according to actual technical standards. The product matches the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product matches the basic requirements and remaining regulations of the guideline 2014/53/EU {RED). The declarations and documents are stored at the manufacturer and can be requested and applied there.
  • https://amewi.com/Konformitaetserklaerungen For additional questions about the product and conformity please contact: Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

SECURITY AND HAZARD WARNINGS

  • For damage, caused by disregarding the manual, the warranty expires.
  • We are not liable for secondary failures, material, or personal damage, caused by improper usage or disregarding the security notices.
  • Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
  • Small parts. Danger of suffocation or risk of injury caused by small parts.
  • Suitable for people aged 14+!
  • The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop-down from a small height can cause damage to the product.

BATTERY NOTICE & DISPOSAL

  • Batteries / rechargeable batteries do not belong in the hands of children.
  • Batteries or rechargeable batteries may only be changed by an adult. Never mix rechargeable batteries with dry batteries. Never mix full batteries with half-empty batteries.
  • Never mix rechargeable batteries of different capacities. Never attempt to charge dry batteries. Ensure correct polarity. Defective rechargeable batteries/batteries must be disposed of properly (hazardous waste).
  • Never carry out the charging process unsupervised. If you have any questions about the charging time, read the operating instructions or contact the manufacturer.
  • Read the safety instructions and warnings before using or charging the Li-ion battery.
  • Stop using or charging immediately if the battery is leaking, has a temperature of over 70° C or anything else unusual occurs. Always charge and store batteries on a fireproof surface or in a fireproof LiPo bag.
  • Only use a qualified and specific Li-Po/Li-Ion charger for Li-Po/Li-Ion batteries or NiMH charger for NiMH batteries. Never charge the battery unattended. Do not charge the battery if the charging process exceeds 4.2 V / cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire. Do not discharge the battery with a current that exceeds the maximum discharge current.
  • Otherwise, this will cause the battery to overheat. This can lead to bursting, fire or explosion.
  • Never disassemble puncture, knock, drop, short-circuit and/or throw the battery into a fire.
  • Improper use such as short-circuiting or overcharging can lead to explosions or fire.
  • Store the battery in a safe place where infants or children cannot reach it.
  • The above indicates the danger of using the battery. The user assumes full responsibility for the result of using the battery.
  • Please be sure to observe our safety instructions which you can find online at https://amewi.com/downloads/manuals/Akku-Sicherheitshinweise.pdf

DISPOSAL

  • AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronic products are not allowed to be put in household garbage.
  • Please dispose of the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal of household garbage is forbidden!
  • Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
  • Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).
  • Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.
  • Batteries labelled with the recycling symbol can be put into a used battery collecting tank Most supermarkets have
  • They are not allowed to be put into local household garbage
  • AMEWI Trade GmbH is involved in the dual system for boxing over the company Landbell AG.
  • All used boxes are collected from partner companies’ waste disposal contractors at private customers (local households), sorted and properly utilized. The involvement in Dual Systems helps to save C02 Emissions.

THANK YOU

  • Thank you for purchasing the Amewi AMXFlight AFX-135. Please read the instruction manual carefully and keep it for future reference.

WARNING

  • This remote-controlled model is not a toy. It consists of many small parts and is not suitable for children under 14 years. Four 1.5V AA batteries are required for the remote control. A 7,4V Li-Po battery is used for the model (included).
  • Always keep your fingers away from the drive parts and other moving parts to avoid injury. The model’s motor gets very hot. To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.

ON INAPPROPRIATE USE OF THE PRODUCT

Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

MAXIMUM TRANSMITTING POWER DATA

2460-2475MHz Operation Frequency:
14dBm Maximum Radio Frequency power:

Maximum peak power

IMPORTANT NOTES

Note: This product is manufactured according to strict performance guidelines and complies with safety standards and requirements. This product is not suitable for children under 14 years of age.
The manufacturer is not liable for any injury or accident caused by using abnormal parts, excessive wear and tear, improper assembly, or operation. Please operate this product safely and responsibly.

PRECAUTIONS

  • Please read the following safety information before using the model. Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged.
  • Please do not use the model in an environment that you cannot see. Signal interference can cause the model to go out of control.

Please do not use the model in the following places:

Please do not operate the model if you are tired or unwell, have drunk alcohol or have taken drugs – this may cause injury to yourself or others. To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot. Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model. Check the model and the remote control before use. Check the screws to make sure they are tight. When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control. If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.

IMPORTANT NOTES

  • Be sure to read thoroughly the manual before you begin.
  • As the product contains small parts, keep it away from small children.
  • Never reverse the connection / disassemble the battery.
  • Do not operate the model on public roads or crowded places.

SPECIFICATIONS

  • Length 235mm
  • Height 80mm
  • Weight 98g
  • Rotor diameter 256mm
  • Battery Li-Po 2S 7,4V 350mAh
  • Flying time Ca. 12 min.
  • Charging time Ca. 45 min.

BOX CONTENT

  1. Helicopter
  2. Remote-control
  3. Li-Po battery
  4. USB charging cable
  5. Screwdriver & hex wrench
  6. Rotor blades & Tail rotor
  7. Manual

THE REMOTE CONTROL

Press and hold the button and switch on the remote control to switch between Mode 1 and Mode 2.

PART NAMES

CHARGING BATTERY

METHOD 1: Charging battery by the USB port on a computer.

  1. Connect the USB charger with the USB port.
  2. Connect the battery with a USB charger: blue light ladder flashes while charging. When the loading process is finished, all LEDs light up.

METHOD 2: Charging battery by power supply adapter.

  1. Connect the USB charger with the power supply adapter.
  2. Connect the battery with a USB charger: blue light ladder flashes while charging. When the loading process is finished, all LEDs light up.

METHOD 3: Charging battery by power bank.

  1. Connect the USB charger with the USB port.
  2. Connect the battery with a USB charger: blue light ladder flashes while charging. When the loading process is finished, all LEDs light up.

CHARGING BATTERY

  1. Open the battery compartment lid.
  2. Insert 4AA batteries. Make sure that the polarity is correct.
  3. Then close the battery compartment.

PREPERATION

  1. Make sure the batteries in the remote control are new and the flight battery is fully charged.
  2. Fly in places with enough space. Do not fly near traffic, people, power lines or bodies of water.
  3. Do not overtighten the screws on the rotor blade holders, the rotors must be able to swing easily.
  4. In an emergency, you can press the “Auto Land” button for 3 seconds to land the helicopter without rotation.
    • Note: This action may cause the helicopter to crash.

Be sure to familiarize yourself with the operation of the remote control before your first flight.

PREPERATION

OPERATION

  1. Turn on the remote control.
  2. Slide the battery into the helicopter. Press the button on the battery for 2 seconds.
  3. The LEDs on the remote control and the helicopter flash. Quickly push the throttle lever up and down again. The remote control beeps once and the indicator lights light up continuously. The connection has been established.
  4. Pull the two levers to the outer, lower corner to start the helicopter. (You can also press the Auto Start/Auto Land button). The helicopter will take off.
  5. Keep your nose pointed forward and always keep enough distance from yourself and others.

If you want to land the helicopter manually, hold the throttle down for 2-3 seconds and release only after the propellers have stopped turning. (You can also press the Auto Start/Auto Land button to land).

Note: Beginners should pay attention to the direction of flight. Keep the nose forward to avoid injury.

FLIGHT YAW CORRECTION METHOD

  • Use the trim buttons to make corrections during the flight. Should the helicopter drift in one direction while hovering, follow the steps below. Bring the helicopter into the hover.
  • Depending on the direction, press the trim button in the opposite direction until the helicopter hovers.
  • Keep the helicopter at about one-meter height for trimming.

OPERATION

GYRO CALIBRATION

To calibrate the gyro, proceed as follows:

  1. Place the helicopter on a flat surface.
  2. Press both levers into the bottom left corner. The LED on the helicopter starts to flash.
  3. As soon as the LED lights up continuously, the calibration is complete. Now you can move the levers back to the zero position.

ROTOR BLADES

  • Remove the screw on the rotor blade holder using a Hex wrench.
  • When mounting, make sure that you do not overtighten the screw. The rotor blades must be able to swing freely.

MAIN MOTOR

  • First, disconnect the motor plug. Loosen the screws on the motor holder Pull out the motor by gently turning it back and forth.

MAIN GEAR

  • First, pull out the screw and pull out the large gear wheel directly downwards.
  • Pay attention to the direction when inserting the new gear. The plane of the shaft should be aligned with the plane of the inner bore of the gear.

TAIL ROTOR

  • Pay attention to the direction when replacing the tail rotor. Align the rotor with the motor shaft and press it slowly onto it to ensure even rotation.

TROUBLESHOOTING

Problem Possible Cause Solution

The helicopter and remote control are switched on, the LED at the tail is flashing, no function.| Helicopter and remote control are not connected.| Reconnect the helicopter and the remote control.
Nothing happens when the helicopter is switched on.| The model battery is empty. Check the voltage of the battery.

The batteries on the remote control are empty.

The remote control is off.

| Charge the battery

Replace the transmitter batteries. Switch on the remote control.

The motor does not turn when the throttle is opened, the LED on the receiver flashes.| The battery is empty.

The battery is not inserted correctly.

| Charge the battery.

Insert the battery correctly.

The rotor turns but the helicopter does not take off.| The battery is empty.| The battery is empty.
The helicopter vibrates very strongly.| The rotor blades are deformed. The shaft is bent.

The tail rotor is bent.

The shaft of the tail motor is bent.

The screws on the rotor blade mounts are too tight.

| Replace the rotor blades. Replace the shaft.

Replace the tail rotor.

Replace the tail motor.

Loosen the screws on the main rotors.

---|---|---
The helicopter turns to the left after takeoff.| The tail motor has too little power.
The tail rotor is defective.

The tail motor is defective.

| Check the connection of the tail rotor and the tail rotor. If they are defective, replace them.
The helicopter drifts in one direction.| The servos must be trimmed.| Trim on the remote control as described in the instructions.
The helicopter does not fly in all directions.| Servo defective| Replace the defective servo.

SPARE PARTS

  • You can find a spare parts list at amewi.com

  • AMEWI Trade GmbH Nikolaus-Otto-Str. 18 33178 Borchen Germany
    Service times: Tuesday 9:30 a.m. – 12:00 p.m.

  • Thursday 2:00 p.m. – 4:30 p.m. Telephone: +49 180 5009821 (landline 14 cents/min., mobile max. 42 cents/min.) Support: https://amewi.com .

  • amewi.com

Documents / Resources

| AMEWI AFX-135 Alpine Air Ambulance Hubschrauber [pdf] Instruction Manual
AFX-135 Alpine Air Ambulance Hubschrauber, AFX-135, Alpine Air Ambulance Hubschrauber, Air Ambulance Hubschrauber, Ambulance Hubschrauber, Hubschrauber
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals