imPEX PF 7502 Blade High Speed Pedestal Fan Instruction Manual

imPEX PF 7502 Blade High Speed Pedestal Fan

INSRUCTION MANUAL

Congratulations on your purchase of an IMPEX electric fan. Your smart decision to buy an IMPEX product reflects your taste for the finer things in life. We welcome you to the ever-growing IMPEX family. lMPEX has already conquered the hearts of many discerning customers with its impeccable quality.superior reliability and excellent after-sales services.
At IMPEX, we are committed to making your life easier with innovative technologies. Our commitment shows in every product that is rolled out from our factory.
In the unlikely event of your impex product requiring warranty services, you may use the warranty card that comes to you with this product. The IMPEX range of fans comprises table fans. pedestal fans, ceiling fans, wall mounting fans. There is a wide range to choose from in tune with your individual needs. Powerful, durable and safe, IMPEX fans redefine your concept of performance. It is manufactured to the highest quality standards and we hope that it will give you many years of trouble-free service.
This manual contains important operating and safety instructions. As with any fine instrument, due care and maintenance of this product will provide years of dependable service. Please go through this manual before using the product and enhance your IMPEX experience.

IMPORTANT SAFE GUARDS

When using an electrical appliance, basic safety precautions must always be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING Warning: To reduce the risk of fire, electrical shock, and injury to person, the following must be adhered to:

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. The product is for household use only.
4. Connect the appliance to a single-phase AC supply voltage, specified on the rating plate.
5. Never leave the fan un-attended while it is in use. Always turn the  fan to the “OFF” position, and unplug the fan from the electrical outlet socket, when not in use.
6. Extreme caution is necessary when any fan is used by or near children, invalids or elderly persons, and whenever the fan is left operating un-attended.
7. The fan cord must not be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cord away from the traffic area, and where it will not be tripped over.
8. Do not operate the fan with a damaged cord or plug, or after the fan malfunctions, or has been dropped, or damaged in any manner.
9. If the supply cord is damaged, it must be repaired by the manufacture of its service agent or a similarly qualified in order to avoid a hazard.
10. Use the fan in a well ventilated area. While in use, ensure that the airtakes or exhaust openings are not blocked un-expectedly, and the fan distance from the wall or corner must be no less than 20cm. The fan should not be placed below or besides any curtains or similar
11. To avoid mechanical danger when in use, do not insert, or allow fingers, or any other objects into the grill. Do not block the air-intakes or the exhaust openings in any manner.
12. The fan must only be placed, and used on a Aat dry Aoor.
13. Do not use the electric fan in rain.
14. Make sure to keep the fan far away from humidity, chemical articles and oils.
15. While cleaning, be sure to not splash water and do not use oil, alcohol or chemical articles as they may cause distortion of fan body and cause electrical hazards.
16. Do not pull out the power supply plug by pulling power supply cord, which may lead to electrical shock or generating electrical shock.
17. Keep away from curtain, closing or other something may affect the fan’s working.
18. Turn off all switches and pull out power supply plug when you go out for a long time.
19. Never use the fan before finishing assembly to avoid any hurts.
20. If the supply cord is damaged, it must be repaired by the manufacture of its service agent or a similarly qualified in order to avoid a hazard.
21. Before sending for maintaining, if the unit doesn’t work, please check the plug of power supply has been inserted into socket with electricity.
22. This appliance can be used by children aged from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved.
23. Children shall not play with the appliance
24. Cleaning and user maintenance shall not be made by children with supervision.
25. Ensure that the fan is switch off from the supply mains before removing the guard

FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS

SPECIFICATIONS

STRUCTURE AND PARTS

ASSEMBLY INSTRUCTIONS

The fan is packaged with its grills un-attached. You must attach the grills before operating the fan. Warning: Never operate the fan without its foundation and other parts. The fan must only operate in the up-right position, and any other position will be hazardous.
Do operate the fan only in upright position; any other position could create a hazardous situation. Assemble the foundation and other parts of the appliance in the following sequence:
al Unpack the fan and remove all parts from the package bl Assemble the base (15) with outside tube (13) correctly. Using tight block(16) and tight screw (17) to fasten the base (15) and outside tube (131 Note: the inner tube (11) which used for height adjustable is inside the outside tube (13), please loosen the cap (12) and pull out the inner tube (11) to suitable height, then fasten the cap (12) to lock the inner tube (11).
Note: If there is cap (14). please ware it to the outside tube (13) before assemble with base, the cap (14) is just for decoration, no function use.
Note: When you want to regulate the stand fan height. please loosen the cap
(12) and adjust the inner tube (11) to correct height, then lock the cap (12), it will be Fine.

ASSEMBLY INSTRUCTIONS

1. Inner tube (11) is inside the outside tube (13)

2. Loosen the cap (12) and pull out the inner tube (11) to suitable height, then fasten the cap (12) to lock the inner tube (11)

3. Loosen the cap (12) and adjust the inner tube (11) to correct height, then lock the cap(12l for height regulation

4. c. Assemble the Inner tube (11) to control pannel (9), then fasten tight with screw (10)

5. d). Adjust the fan head to the up or down position, and then tighten the fasten screw.
   e). Use the Tight Nut[S) to fasten attach the Back Cover[6) to the fan head, and then use the Cap[3) for the fan leaf to hold the fan Blade[4) in placed. To attach the Front Cover[l) to the Back Cover[6), you must use the Hoop[2) carefully to hold them together, and fasten the Hoop[2) with the screw provided.
   Note: there are two groove in Hoop[2)should be matching with the cover[1) and back cover[S) rim correctly, below pie for reference

6. Groove in Hoop (2)
   

7. Correct matching
   

FUNCTION INTRODUCTION

1. Setting of wind direction Correct matching The angle of the fan head is adjustable, it can facing upwards and downwards by slightly lift or press the cover.

2. Setting of shaking Pressing the turning button and the head starts to rotate, then pull it out and fan will stop rotating.

3. Setting of wind speed
   Totally there are 3 speeds, you only need to press speed button repeatedly, the wind speed will be change from 1 to 3

4. Setting of timer The fan can work at 10mins, 20mins, 30mins, 40 mins, 50 mins, 60mins by setting the timer.

SOLUTION TO SIMPLE FAILURE

When starting the fan, the fan blade doesn’t work, please check whether the power plug has really inserted into the socket or the cover has distorted, which has touched the fan blade. If sound the noise when starting the fan, please check the unit as following:

1. Fan blade has been tight installed into the output shaft of motor.
2. Groove on back of cover has matched the inserting groove on the output shaft.
3. There are tiny defective edge ring existing around the fan blade.
4. The cover has distorted, which has touched the fan blade

MAINTAINING

Be sure to switch off the power supply and pull out the plug before deaning.

1. This machine only needs common external deaning and wiping.
2. Place into casing and store in the dry position.

CONFORMITY WITH DIRECTIVES

CORRECT DISPOSAL OF THIS PRODUCT

| This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment, or human health from uncontrolled waste disposal, and re-cycle it responsibly to promote the sustainable re-use of material resources. To return the used device, please use the use the return and collection systems, or contact the retailer where the product was purchased. They can take the product for safe environmental re-cycling.

Contact your nearest Techzone for queries, advice or anything related to your IMPEX product Our customer care executives and service engineers are at your beck and call.

WARRANTY CARD

Dear customer,
Thankyou for purchasing IMPEX product. Your IMPEX product is under warranty in accordance with terms and conditions stated herein .

• Your units and components contained therein are warranted against defective material and workmanship for a period of 24 months from the date of purchase .
• To obtain warranty protection. notice of alleged defect must be given promptly upon discovery and warranty card must be presented along with proof of date of invoice purchase to our service personnel at the time of service .
• The defective parts/material shall be replaced with a functionally working equivalent part/material and defective part/material will become the property of the company. Only motor assembly is covered under warranty.
  

LIMITATIONS OF WARRANTY

Damage resulting from accidents, misuse, abuse, alteration, natural calamity, tempering or failure of the purchaser to follow the normal operating procedure outlined in user manual I Shortage of voltage. wrong use of electrical supply. etc. I Normal wear and tear. corrosion. rusting or stains I Scratches and damage to outer surface areas and externally exposed units or parts that due to normal customer use. I If any part or parts of the unit are replaced with a part or parts not supplied or approved by company or unit has been dismantled or repaired by any person other than authorized technician I Product which has serial number removed or tampered I If the warranty card is being altered. defaced. missed or erased in any manner whatsoever I Any plastic or glass parts are not covered under warranty.

CUSTOMER CARE INDIA
You may please contact us for any Query 1860 425 2444
(9.30 am to 5.30 pm on all working days)
Email: techzone@kcmtechnologies.com
www.impextechnologies.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>