IMPEX ADI-10260-I Power Tower Owner’s Manual
- June 16, 2024
- impex
Table of Contents
- ADI-10260-I Power Tower
- BEFORE YOU BEGIN
- IMPORTANT SAFETY NOTICE
- WARNING LABEL PLACEMENT
- EXECISE GUIDELINES
- Beginning a Strength Building Program
- IMPORTANT ASSEMBLY INFORMATION
- Fasten Nuts and Bolts
- CARE AND MAINTENANCE
- WEIGHT CAPACITY AND DIMENSION
- OPERATION NOTES
- 10); use Lock Pin (#24) to lock both Arm Supports in the upright position.
- EXPLODED DIAGRAM
- LIMITED WARRANTY
- ORDERING REPLACEMENT PARTS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
POWER TOWER
ADI-10260-I
ADI-10260-I Power Tower
Information
Model
ADI-10260-I Retain This
Manual for Reference
120618
OWNER’S MANUAL
IMPORTANT : Please read this manual before commencing assembly of this product.
IMPEX® INC.
2801 South Towne Avenue, Pomona, CA 91766
Tel:800-999-8899
www.impex-fitness.com
info@impex-fitness.com
NOTE : Please read all instructions carefully before using this product
BEFORE YOU BEGIN
Thank you for selecting the ADIDAS ADI-10260-I Power Tower by IMPEX® INC. For your safety and benefit, read this manual carefully before using the equipment. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or amaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you.
Toll-Free Customer Service Number
1-800-999-8899
Mon. – Fri. 9 a.m. – 5 p.m. PST
www.impex-fitness.com
info@impex-fitness.com
IMPORTANT SAFETY NOTICE
This exercise equipment is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your equipment. In particular, note the following safety precautions:
-
Keep children and pets away from the equipment at all times. DO NOT leave children unattended in the same room with the equipment.
-
Only one person at a time should use the equipment.
-
If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
-
Position the equipment on a clear, leveled surface. DO NOT use the equipment near water or outdoors.
-
Keep hands away from all moving parts.
-
Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the equipment. Running or aerobic shoes are also required when using the equipment.
-
Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer. -
Do not place any sharp object around the equipment.
-
Disabled person should not use the equipment.
-
Before using the equipment to exercise, always do stretching exercises to properly warm up.
-
Never operate the equipment if the equipment is not functioning properly.
-
A spotter is recommended during exercise.
-
This equipment is designed and intended for home and consumer use only, not for commercial use.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS
IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH
PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS
EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
WARNING LABEL PLACEMENT
The warning labels shown here have been placed on the Rear Base Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown.
EXECISE GUIDELINES
Building Muscle and Gaining Weight
Unlike aerobic exercise, which emphasizes endurance training, anaerobic
exercise focuses on strength training. A gradual weight gain can occur while
building the size and strength of muscles.
While developing muscle mass, your body adapts to the stress placed upon it.
You can modify your diet to include foods such as meat, fish and vegetables.
These foods help muscles recover and replenish important nutrients after a
strenuous workout.
Muscle Strength and Endurance
To achieve the greatest benefit from exercise, it is important to develop
an exercise program that allows you to work all of the major muscle groups
equally.
To increase muscles strength; follow this principle:
Increasing resistance and maintaining the number of repetitions of an exercise
results in increased muscle strength.
To tone your body, follow the principle: Decreasing resistance plus increasing
the number of repetitions of an exercise results in increased body tone.
Once you feel comfortable with an exercise, you can change the resistance, the
number of repetitions, or the speed at which you do the exercise. It is not
necessary to change all three variables. For example, let’s say that you are
training at 50 lbs and performing the exercise 10 times in 3 minutes. When
this becomes too easy, you may decide to move up lifting 60 lbs for the same
number of repetitions in the same amount of time. Lifting more weights fewer
times most often
develops muscle strength. To gain both muscle strength and endurance, it is
recommended that you perform each exercise 15 to 20 reps per set.
Training Intensity
How hard you begin to train depends on your overall level of fitness. The
soreness you experienced can be lessened by decreasing the load you place on
your muscles and by performing fewer sets. To avoid injury, you should
gradually work into an exercise program and set the load to your individual
fitness level. The load should increase as your fitness level increases.
Muscle soreness is common, especially when you first start exercising. If you
are painfully sore for a long time, it may be time to change your program.
Eventually, your muscle system will become accustomed to the stress and strain
placed on it.
Beginning a Strength Building Program
Warming Up
To begin strength training, it is important to stretch and perform light
exercise for 5 to 10 minutes. This helps prepare the body for more strenuous
exercise by increasing circulation, raising your body temperature and
developing more oxygen to your muscles.
Workout
Each workout to keep in mind that muscle soreness that lasts for a long period in not desirable and may mean that injury has occurred.
Cool Down
At the end of each workout, perform slow stretching exercises for 5 to 10
minutes. Ease into each stretch only going as far as you can. This stage
allows your muscles wind down after training.
To provide a total workout program it is also recommended that 2 to 3 days of
aerobic exercise is performed in addition to the strength training.
Drinking Water
For the body to function properly, it must be properly hydrated. If you are
exercising, you should increase your fluid intake. The reason for this is that
the water you take in will leave your system through the sweating mechanism
that cools your body during exercise. The water you lose through exercise must
be replaced so that the muscles can recover properly.
Rest Day
Although you may not feel like doing it, taking a rest day at least once a
week is important because it gives you body a chance to heal it self.
Continuously working your muscle will result in over training which will not
benefit in the long run.
IMPORTANT ASSEMBLY INFORMATION
- Tools Required for Assembling the Bench: Two Adjustable Wrenches and Allen Wrenches.
- NOTE: It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
- Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to be assembled. Attach washer only to end of the Carriage Bolt.
- Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to be assembled.
- Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all components have been assembled
in current and previous steps.
NOTE : Do not over tighten any component with pivoting function.
Make sure all pivoting components are able to move freely. Do not tighten all
Nuts and Bolts in this step.
CARE AND MAINTENANCE
-
Lubricate moving parts with WD-40 or light oil periodically.
-
Inspect and tighten all parts before using the equipment.
-
The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents. -
Examine the equipment regularly for signs of damages or wear.
-
Replace any defective components immediately and/or keep the equipment out of use until repair.
-
Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
- Maximum User weight: 300 lbs.
- Assembled Dimension: 48.5” x 44” x 91”
OPERATION NOTES
Before doing Chin-up exercises, flip up the Left & Right Arm Supports (#9 &
10); use Lock Pin (#24) to lock both Arm Supports in the upright position.
The user needs to face towards the back of the machine when doing Chin-up exercises.
ADI-10260-I PARTS LIST
PART NO. | DESCRIPTION | SIZE | QUANTITY |
---|---|---|---|
1 | Rear Base Frame | 1 | |
2 | Left Base Frame | 1 | |
3 | Right Base Frame | 1 | |
4 | Left Upright Beam | 1 | |
5 | Right Upright Beam | 1 | |
6 | Rear Support | 1 | |
7 | Left Upper Frame | 1 | |
8 | Right Upper Frame | 1 | |
9 | Left Arm Support | 1 | |
10 | Right Arm Support | 1 | |
11 | Chin-up Bar | 1 | |
12 | Dip Handle | 2 | |
13 | Cross Brace | 1 | |
14 | Curved Bracket | 2 | |
15 | Bracket | 3 1/8” x 5 1/8” | 3 |
16 | Backrest Board | 1 | |
17 | Arm Pad | 2 | |
18 | Bushing | Ø1” x 3/8” | 4 |
19 | 19 Grip | 6” | 8 |
20 | Base Frame Cap | 4 | |
21 | End Cap | 3 1/8” | 4 |
22 | Tube End Cap | 2 | |
23 | End Cap | Ø 1” | 8 |
24 | Lock Pin | 1 | |
25 | Carriage Bolt | M10 x 2 ¾” | 8 |
26 | Carriage Bolt | M10 x 2 3/8” | 10 |
27 | Hex Bolt | M12 x 3 3/8” | 2 |
28 | Allen Bolt | M10 x 2 ½” | 4 |
29 | Allen Bolt | M10 x 1 ¾” | 2 |
30 | Allen Bolt | M10 x 1” | 7 |
31 | Allen Bolt | M8 x 2 ½” | 8 |
32 | 32 Washer | Ø 1” | 4 |
33 | 33 Washer | Ø ¾” | 36 |
34 | 34 Washer | Ø 5/8” | 8 |
35 | 35 Aircraft Nut | M12 | 2 |
36 | 36 Aircraft Nut | M10 | 23 |
37 | 37 Foam Grip | 2 | |
38 | 38 Sand Panel | 2 | |
39 | 39 Spacer | 2 | |
40 | 40 Cover Cap | M12 | 4 |
41 | 41 Cover Cap | M10 | 23 |
Allen Wrench (Tool) | #6 | 1 | |
Allen Wrench | #5 | 1 |
EXPLODED DIAGRAM
IMPEX®INC.
LIMITED WARRANTY
IMPEX Inc. (“IMPEX® “) warrants this product to be free from defects in
workmanship and material, under normal use and service conditions, for a
period of two years on the Frame from the date of purchase. This warranty
extends only to the original purchaser. IMPEX’s obligation under this Warranty
is limited to replacing or repairing, at IMPEX’s option.
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained
by calling IMPEX Customer Service Department at
1-800-999-8899. All freights on
products returned to IMPEX must be prepaid by the customer. This warranty does
not extend to any product or damage to a product caused by or attributable to
freight damage, abuse, misuse, improper or abnormal usage or repairs not
provided by an IMPEX authorized service center or for products used for
commercial or rental purposes. No other warranty beyond that specifically set
forth above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special or consequential
damages arising out of or in connection with the use or performance of the
product or other damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyments or use, costs of removal,
installation or other consequential damages or whatsoever natures. Some states
do not allow the exclusion or limitation of incidental or consequential
damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and
any implied warranties of merchantability or fitness for a particular purpose
is limited in its scope and duration to the terms set forth herein. Some
states do not allow limitations on how long an implied warranty lasts.
Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal right. You may also have other rights
which vary from state to state. Register on-line at www.impex-
fitness.com
IMPEX®INC.
2801 S. Towne Ave.
Pomona, CA 91766
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department
toll-free at 1-800-999-8899 during our
regular business hours: Monday through Friday, 9 am until 5 pm Pacific
standard time.
info@impex-fitness.com
When ordering replacement parts, always give the following information.
- Model
- Description of Parts
- Part Number
- Date of Purchase
©IMPEX INC. www.impex-fitness.com
References
- Fitness.com
- The Best Home Gyms, Cardio and more - impex-fitness.com
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>