TESLA TV100 Smart Thermostatic Valve User Manual

TV100 Smart Thermostatic Valve User Manual

Information about this manual

Please read this manual completely and carefully before starting to use the device. The manual contains important infcmiabon abaft the intended use of the device. Especially observe the safety notes. Keep the manual for later consultation. If you hand over the device to other persons for use, please hand over the operating manual as well.

Product Description

The device moves a vave to intelligently control the flow of heat to the radiator. With the Thermostat Radiator Valve TV01 you can conveniently adjust the room temperature between 5-30 , and save more than 15% of energy. The device is part of the Tesla Smart system and works with the ZigBee 3.0 protocol. All devices on the system can be configured comfortably and individually with the Testa smartphone app. The temperature can be controlled individually, room by room.
The radiator thermostat fits to all comma) radiator valves and is easy to mount-without having to drain any water or intervene in the heating system. The addrtiona boost function enables the radiator to be heated up cpckly for a brief period of time by opening the valve for 5 minutes. There will be a pleasant room temperature right away because of the radiated heat.

Device Overview

Start-up

4.1 Before we get started

• 2 x 4A battenes are required for TRV t work, please get prepared.
• A smart gateway hub is required for the TRV to work.
• Temperature is shown in deqrees Celsius. 4.2 Inserlingirep lacing} batteries
• Pull off the battery compartment cover on the underside of the device.
• Ingert 2 new LR6(44) batienes in the battery campartn- ent, making sure they are the nght way round.
• Reattach the battery compartment cover and latch i into place.

The sence life of new alkaline battenes is aporamatety 1.5 years. A battery symbol(hAt yp) on the display indicates that the battenes need to be replaced. After removing the emply baltenes, wait approx. 1 minute before inserting the new ones. This device does not support operation with rechargeable battenes.
43 Set date and time
If battenes ane inserted of repleced, the date and time is Sutomabically requested after a bref dismay of the firnwvare version number.

• Set the year,month,day, hour and roinute with the +/- button, and confirm with Menu button. ‘You can press the Boost button to retum to the previous menu dunng the setting of date and time.
• The display of” InS’ with the rotating ‘ ” shows thal the motor is sill travelling Back.
• When’ AdA”is shown in the dieplay the rackakor thenncstat Can be installed on the vabee. After installation, press the Boost button to nun adaptive.
• The deplay of” Ad4! wilh the rotating ” 1M ‘shows that an dapting mun to acant the thennceatat to the valve.

If the adapting runs is initiated before installation, press Boost: button and the motor travels lback to the ‘ I EIS ‘ position. Ir an error message(F1,F2,F3) is dis_playedll press the PatEkedost button and the motor similarly irats back to The inS position..

Installation of the radiator thermostat

The radiator Thermostat is easy to install and can be done without drainir heatna ‘outer or intervening in the heeling system No special tools are required, nor does the heading have to be switched off The ring nut attached to the radiator thermostat can be used universally and vdtthout accessories for all vaves with a thread size of MM) 1_5 from the most popular manufacturers such as:

• Dantoss Heimeier I
• Junkers
• LandisigeGyr (Duatyr) Horieywell-Braukruarin tOventrop
• Schlosser
• Corrap * %Taff Sanayij
• Mertik rellaxitrcil 4 Wafts Wingenroth flex.)
• R_B.11.1
• Tienirne
• Idrnar54
• Jaga
• Siemens

By means of the adapters in the delivery; the dev:ce. can be instal, ied on radiator valves. of type Dahfosz, RA, Darrfoss PLAV and DanfOss 561 Unscrew your existing radiator thermostat NO. worries, water will not ieak diring this process
5.2m30 x1.5
52.11 Screw theTP.%.: smart radiator themiostat directly onto the radiator if the lot hector type is M30 x 1.5(picture sham as telow). ‘Thu can ad:ust the angle to make the screen facing the viewer pfopety.
5.2.2 Rotate the theTrottat dial to tie maximum value, the max value- may be :E,r or
5.2.3 Check the 21 is active. 52A Install the device.

5.3Dantoss RAWL Valve
5.3.1 Check the (6)is active..
5.3.2 The valve bodied. have elongated notches around their cirainterence, which ensure that the adapter is properly seated when it snaps on: snap on the adapter completelyso that the pins inside the adapter are lined up with the notches on the valve.
5.3.3 Install the adapter, Flame A is ar.igned with Plane B.
5.3.4 I nstaill the irotrid tube into the device.
5.3.5 Install the device.

5.4 Dantoss RAV Vatve
5.4.1 Rotate ttie thermostat dial to the maKimunival the max value may be 6 or 8.
5.4.2 Check the …C1 s active.
5.4.3 The vaive bodied have elongated notches around their circumference, which ensure that the adapter is properly seated when it snaps OM snap on the adapter oompletelsyysothat the pins inside the adapter are lined up with the notches on the valve_
5.4.4 Install the. adapter,Plane A is aligned with Plane EL 5.4.5 Union nut.
5.4.6 Instale the device.

5.5 Dantoss RA Wile
5.5.1 I Rotate the thermastat dial to the maximum -value, IV Align Dial.
5.5.2 Check the is active.
5.5.3. The vaVe bodied have elongated notches around their dreurference, which ensure that the adapter is pmperliy seated when it snaps on: :snap on the adapter cornpletely.sco that the pins inside the adapter are lined up with the notches on the valve.
5.5.4 Instal: the adapterplane A is aligned vi,4th Plane .
5.5 Union nut 5.5.6 Inata the round is inb the deice.
53.7 I nstal the deafte.

5.6 M281x1.5mm
5.6.1 Select lhe length of the ejector rod Elopogiir-9 to the following brands or valve sizes, and the size of opecior rod is 15/ 17/19 24mn.
5.6.2 TO instill the ejector rod WI, the correct size into the hole.
6.6.3 lb iri l ill the adapter onto M28 *1.5 valve!.

5.7 Giacomin
5.7.1 To install the adapter onto the Giecornini valve in Ibe correct direction.
5.7.2 To Install the CIA ejector rod Into the hole. 5.8 Caleffi
5.8.1 Open the valve flow to the maxflurn, as shown in pie 1.
5.8.2 To Install the adariter onto the Ceteffl valve in the corn)ct direction.

5.9 Use the Ejector led
Due to the cirnensibrial and assembly tolerance of the metal it nay result In the ‘following situations:,

1. When the device is failure, F2 is displayed,
2. The metal valve cannot be fOliy closed and is kept heating an the time.
   HanidNng method; Please use the ejector rod 1.641M (1 ) first, if the above two situatkwis sti I exist, try to is the ejector rodi 2,6mrn (2) Instead,

Interface screen

When you see the LCD screen is showing inforniatiun as below, the radiator thermostat cs ready for configuration. If not: p ease uninstall and re-instal the batteries and retort step 4.

APP Operation

Preparation for use

• Tim Smart is available for both OS and :Android OS Search the name ,Tesla Smart in App Store or in Google Play or scan the OR code to download ithe App and register or ‘login your account
• Make sure that the smartphore is connected to the 24Ghz network and have Eluetooth & GPS locatcc turned on_ Connect. the device
• Make sure you have added Tesla Smart ZigBee Hub to your Tesla Smart app –
• Tesla Smart Thiffmostatic Valve must be installed on the heating valve in ‘circler to pair with Testa Smart app ZigBee Hub
• Open Testa Smart app and click on ZigBee Hub and then dick on Add new device” (check that the blue LED light on hub is Linking during pairing mode) or n Tesla Smart app dick.
• sign to Add new device. Select Ihemlostatic Valves
• Testa Smart Thenrostatic Valve and fialf.cis: the instructions to add the thermostatic valve step by  steps on your phone.
• Press lair Boost” button for 5 seconds on thermostatic valve until the ZigBee signal icon flashes: !klitlitti means the device has entered the pairing mode.
• Waft for the device b connect control the device
• Control the Testa Smart Thermostatc Valve ithth app

Voice Control

8.1 Amazon Alexa
Amazon Alexa is an intelligent personal assistant developed by Amazon: and is capable or liiraice interaction. Smart radiator thermostat works with Alexa to allow y0 1.1 to regulate The temperature of each room in your system by uSng a wake-vbforcl and an instruction. The wake-work is “.Alexa’ followed by an instruction such as “increase temperature: OurrenIty, “amazon has made interaction and communication with Alexa only available in English. Alexa requires explicit instructions. You must infomi Alexa of the room to which you wish to address followed by an instruction, such as “increase tern perature.3 If no specific room is mentioned, Alexa *ill ask you which room you want to address, and then will increase The setpoint temperature by it only based on the roan reply from ./01.1. If you want the setpolit temperature to increase by 44-C in the mom, you must explicitly state to 1-1,1exa to “increase the temperature in the hieing room by 4°C.3
Note: If Alexa is asked to increase the temperature by 2″0, then Alexa will add 24C to your set-point If the ambient temperature is already above the current set-point then the actual temperature will not change and smart radiator thermostat will not turn the heating ON.
Common cornrnands for Alexa
Listed berm are common commands used with Alma

• Discover DerOces: l’Arexa, discover devices°
• Reduce Temperature: ‘.4L. exa, decreasethe DEVICE NAME by 4 degrees7 tAlexa, make ft Doder in here.’
• Increase Tempe raise. ‘Alava, increase the DEVICE NAME by 3 degr ”AJexa, make Et warmer in here.°
• Set: :Temperatise: ‘Alexia? set the DEVICE NAME to 213 deg’
• GetTenTerature: “.41exa, what is the DEVICE NAME temperature?
• Get Set Plaint lAlexa, what is the upstairs :set to7E:
  Note: Alexa conskiers the smart themicstat and room inarnes as the devices_

8.2 Google Home
Gocgie Harm is a brand d smart speakers that work snilaity to ‘Arisoion Echo_ Googles in vent PA, Gcolle Assistant, is equivalent to Amazon’s Mem. l-one is also available on all Android deVces and does not requ tie tie use of the ‘Smart Speakers-. The user car speak a profusion of corrrands to request information, or ask the Gaegre AssiStarrit to perform an action such as play rnusic, video playback, report news, access hone automation. Ai of this scan al be controlled from a Goole Home device.
Cannon commands for Google Home
Listed below are cannon carman:is tsed viith Goole Home:

• Discover Devices’ ‘Hey goohe, dscover devices”
• Reduce Temperature: “Hey goer, decrease the DEVICE NAME by 4 degrees’ /1-ley gouge, make it coder in here?
• Increase Temperature: “Hey gouge, increase the DEVICE NAME by 3 degrees’ /1-tey goocte, make it warmer in here.°
• Set Temperature. Hey google, set the DEVICE NAME b 20 degrees”
• Get Temperalue: ‘Hey gouge, what is the DEVICE NAME temperature?”
• Get Set Point “Hey goggle. ‘shat is the upstairs set to?” Note: Google home considers the smart themiostat and room names as the devices

Product features

9.1 Auto Mode
In automatic mode, the temperature is canto led in accordance with the set heating profile. Manual changes are activated unti the next point at which the profile changes Afterwards, the defined heating profile vin . be activated again. To activate the automatic mode, please proceed as foi lows:

• Press the mode button to select icon.
• Default temperature: 17tand 21*C.
• Temperature range: 5-301C,sfep: 0.5’C.
• App operation: Click the mode icon to select.

9.2 Manual Mode
In manual mode, the temperature s controlled in accordance with the current temperahre set via ‘412 button. The temperature rentals activated until the next manual change. To activate the manual mode, please proceed as folbas:
The device wil resume to its previous status after detection if no actions is implemented. Or you can manually resume the device by pressing the mode button. App operation: Click the open window icon in APP to cancel the window opening function. The open window detection only operates in automatic mode and manual mode.
9.5 Offset Temperature
As the temperature is measured on the radiator thermostat, the temperature distribution can vary throughout a room. To adjust this, a temperature offset of ±5 °C can be set. If a nominal temperature of e.g. 20 °C is set but the room presents with only 18 C, an offset of -2.0C needs to be set. An offset temperature of 0.0r is set in the settings. To adjust the offset temperature, please proceed as follows.

• Long press the menu button for 5 seconds, it will enter the setting interface.
• Select ‘Offset’ optical via ‘+/–‘ button, and press menu button to enter the offset temperature nterface.
• Set the desired offset temperattre using ‘+/-‘ button and confirm with the menu button. App operation. C ick the offset icon in settings

9.6 Eco and Comfortable
Temperature The contort and eco temperature button makes switching between comfort and eco temperature simple and user friendly. These have been set at the factory at 21.0 °C (comfort temperature) and 17.0 °C (ern temperatire). They can be adjusted as follows:

• Press menu button to select comfortable temperature(: ) or eco temperature( ).
• App operation: aick the icon in APP to select.

Even Si auto mode, the temperature can be changed at any time using the button. It MI then remati the same until the next point S which the program charges.
9.7 Child Lock
Operation of the device can be locked to avoid settings being changed unintended(e.g. trough involuntary touch). To activate/deactivate the child lock, please proceed as follows:

• Long press the mode button for 5 seconds, it will show LOC symbol on the screen and the device bitten cannot be used.
• Long press the mode button for 5 seconds to unlock child lock App operaticn. Click the child lock icon in settings.

9.8 Anti-Freezing Mode The device operation:

• In the manual mode, when the temperature is manually adjusted to less than 5 degrees, the screen will display “AP. and the anti-freezing function will be started to ensure that the indoor temperature is “8” degrees.
• Press any button to cancel anti-freeing function and return to automatic mode. App operation:
• Click the anti-freezing icon( )to tun Wort the function in settings.
  Note: Once this function is activated, other functions are not available unless the function is deactivated.

9.9 Heating stop (Power Saving) Mode
Battery life can be prolonged by switching the heating off. To achieve this, the valve is opened fully. To activate the heating stop, please proceed as follows:
The device operation:

• In manual mode, manually adjust the temperature to more than 30 degrees, display “FIS”on the screen, start the heating stop function, and the device will no longer be able to adjust the temperature.
• Press any button to cancel the heating stop function and return to automatic mode. App operation:
• Click the Heating stop icon( Si $o turn oNoff the function in settings.
  Note: Once the function is activated, other functions are not available unless the function is deactivated.

9.10 Anti-Calcification
(Descaling) Protection The equipment wilt automatically run for a period of time every week to prevent calcification of the va ve.
9.11 Boost
The boost function makes use of human sensations of heat. When activated, the valve will be fully opened for 5 mutes. The heating of a room takes longer than 5 minutes but the heat given off by the radiator can be felt nimeciately.

• Press the boost button to activate the boost function.
• The remaining time fa the function veil be counted down in seconds(299′ to ‘000:).
• After these 5 minutes have elapsed, the actuator changes to the mode which was previously active(autoimanual) with the previously set temperature.
• The function can be deactivated at any time by pressing the boost button again. App operation: Click the icon( ) in app to cancel the boost function.

Setting

Press the menu button for 5 seconds ,enter Setting/Date/ Week programming stage/Open window/Comfortable temp /ECO temp/Offset/Holiday setting_ App operation: Click the settings icon( ) ) in mobile app.
10.1 Date
To set the date and time, please proceed as follows:

• Log press the menu button for 5 seconds, it will enter the setting interface.
• Select “Date/rime” option via ‘+/-‘ button, and Press menu button to enter the Date/lime setting ‘interface.
• Select the desired year/mcnth/dawhatfminute using the “+/-” button and confirm with the menu button. To confirm. the time flashes three tines.
• Use the boost button to return.

10.2 Week Programming
Stage In this menu item, you can create a heating profile with heating and cooling phases according to your personal needs. You can set up to ten stages of temperature every day. The factory default is five stages.

• Press the menu button for 5 seconds to open the configuration menu.
• Select ‘Prga using the ‘+/-‘ button and confirm with the menu button.
• the menu item sdAy, use the”+/-‘ button to select single days of the week, all weekdays, the weekend or the entire week for your heating profile and confirm with the menu button
• Cafirm the start time 00:00 pm with the menu button.
• Select the desired temperature and start time using the “+/-‘ button and confirm with the menu button.
• The next time is shown in the display. You can adjust the time via the ‘+/ button.
• Select the desired temperature for the next time period using the ‘+/-* button and confirm with the menu button.
• Temperature range: 5-30’C, step: 0.5t.
• Repeat this procedure until temperatures are stored for the entire period between 0:00 and 24:00 h. To confirm, the time flashes tree times.
• Use the boost button to return. App operation: Click the icon( ) r app.

10.3 Open Window Press the menu button for 5 seconds to open the configuration menu:

• Select open window( )via the “4: button in the menu.
• Confirm with the menu Dutton.
• Select the desired temperature and time using the “+/-” button and confirm with the menu button. To confirm, the time flashes three times.
• Temperature range: 5-30*C, step: 0.5’C.
• Use the boost button to return.

10.4 Comfortable Temperature Press the menu button for 5 seconds to open the configuration menu_

• (Select comfortable temperature icon ) via the ‘+/-‘ button in the menu.
• Confirm with the menu button.
• Select the desired temperature using the “+/-” button and confirm with the menu button. To confirm, the temperature flashes three times.
• Temperature range: 5-30’C, step: 0.5-C.
• Use the boost key to return. 10.5 ECO Temperature Press the menu button for 5 seconds to open the configuration menu_
• (Select ECO temperature icon)( Or ) the a+/-1 button in the menu.
• Confirm with the menu button.
• Select the desired temperature using the “+/-* button and confirm with the menu button. To oonfimi, the temperature flashes three times.
• Temperature range: 5-30’C. step: 0.5t.
• Use the boost button to return.

10.6 Offset
Press the menu button for 5 seconds to open the configuration menu

• (Select offset iccn)(0ffbt ) via the ’44 button in the menu.
• Confimi with the menu button.
• Select the desired temperature using the “:44-‘ button and confirm with the menu button. To confirm, the temperature flashes three times_
• Temperature range: 5-30t, step: 0.1t
• Use the boost button to return.

10.7 Holiday
Setting Press the menu button for 5 seconds to open the configuration menu.

• (Select hobday mode iconx ) via the ’44- button in the menu. Confirm with the menu button.
• Select the start date using the ‘+!-‘ button and confirm with the menu button.
• Select the end date using the “4-/-‘ button and confirm with the menu button.
• Select the desired temperatue using the Jr-/-1 button and confirm with the menu button. To confirm, the temperature flashes three
• Temperature range: 5-30t. step: 0.5t.
• Use the boost button to retum.
  Note: if there is no operation in the setting interface within one minute, the setting wil enat automatically.

Low Battery

When the battery power is less than 12%, the low power Prompt icon( [ will be displayed. Please replace the bathery as soon a3 possible, When the screen displays (DRE g)the device is not avadable.

Reset

The device operation: Press the “+” and “-” buttons for 5 seconds to enter the reset mode, and the screen will display “FAC”.

• Press the menu button to confirm.
• Press the boost button to exit. After the device runs reset, the data will not be saved, the device will automatically connect to the gateway.

Troubleshooting and maintenance

bump at
F3| Aciuslment range too srna| Please check Metier the waive pin is stuck

Technical Data

Batteries: 2(1_5 V IRS/mignon/AA
Battery life: 1..5 years
Temperature range: 5-304C
Degree of protec:bon: Ip20
Display: LCD with LED
Zgeee Frequency: 2..4GHz
Miximum radiated power:10dbm
Dimensiona x HI x ID): 553 x 54 x 98.3 mm
Weight: 190 g (md. batteries) witting temperature: -101C-40se
Working environment Indoor
Safety :CE!ROHS

Package contents

1 ZigBee Radiator Thermostat
2 15V mignoniLR6/AA batteries
1 Adapters for Danktss(RARAV and RAVL).
1Screw for adapter
1 Operating manual

Instructions tor disposal

Do not dispose of the device with regular domestic waste! Electronic equipnittrit must be diE;cof;e1 of at local cold points for waste eectronic equ-pitert in conVance with the Waste Electrical and Electronic Equ-prnent Directive.
The device is not a toy: do not allow children to play viiith it Do not leave packaging rriater4 lying around_ Plastic filn-stags, pieces of polystyrene, etc. can be dangerous I” the hands of a child.
Used batteries should rot be disposed of vie toregular dornestc waste’ Instead, take then to’ your local lcatter; disposal point. INFORMATION ABOUT DISPOSAL AND RECYCLING This product is mated roit-i symbo for separate ‘collection The pr. Auct muatibe dispcsed of in accordance with the red u’ Mrs for disposal of electrical and electronic equipmaint pire dive 201219IEU on waste electrical and electronic equipment). Disposal together with regular rnunic!pal ithictste is prohibited. Dispose of all electitcal and electronic vcducts E’n accarchricewith iil 10C3 3.fid European regulations at. the desirgnated collection points which hold the appropriate authorisation and certification in Pine with the local. and legislative regulations. Correct crisposal and recydi-ig help to rrinimise impacts on the envi t ment and human health. Further infomiation regarding dtspcisal can lbe Obialre,C1 from the venclorr authorised service centre or local authorities
EU DECLARATION OF CONFORM IP( Hereby, Testa Global Limited cieclares that tie radio  TS1-7113 00-7/01ZG S in co rrag_arice airectives. The full text of the EU decimation of conformity is available at the follovhiing inbarnet address: tsrshtdoc
Connectivity: rig Be EIRE 80215.4 Frequency band 2.400-2.480G-t AgiBee Max. radb-frequency power I:ElRP): c 11 darn

Manufacturer
Tesla Global Limited
Far. East Consortium Building,
121 Des Voevx RD .d Central
Hors Kongwww.teslasmart.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>