PYRAMID GSX1400 Belly Pan Instruction Manual

PYRAMID GSX1400 Belly Pan

GSX1400 BELLY PAN

Part # 20411

Fitting kit contents

• 4 x M6 x 25mm allen bolts CBOLM60011
• 2 x front bracket CFK20410
• 2 x rear bracket CFK20410
• 2 x 25 x 40mm hoseclip CCLIP0003
• 2 x M6 Lugnut CNUTM60007
• 4 x 13mm grommet and spacer CGROM60001/CSPAM60006

Fitting instructions

1. Remove the bolt in the crank casing nearest to and in front of the large Allen bolt underneath.
2. Attach the corresponding bracket (left and right front- see pictures below) to the each of the bolts and replace bolts loosely in crank case.
3. Place jubilee clip through rear brackets and position on frame underside in the appropriate place, using the belly pan to determine the correct place (note: wrap electrical tape around the frame to avoid clips marking frame coating) don’t fully tighten hose clips.
4. Fit the grommets and spacers provided to the holes in the belly pan.
   Attach the belly pan to the brackets using the bolts and washers provided, check position of belly pan is correct, then tighten all bolts fully.

Note:
Periodically check bolts to ensure tightness.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>