VONROC GG501AC Glue Gun Instruction Manual
- June 9, 2024
- VONROC
Table of Contents
GLUE GUN
GG501AC
Original Instructions
A
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:
Read the user manual.
Caution: hot
Denotes risk of personal injury, loss of life or damage to the tool in
case of nonobservance of the instructions in this manual.
Risk of electric shock.
Indoor use only.
Immediately unplug the plug from the mains electricity in the case that
the cord gets damaged and during maintenance.
Class II machine – Double insulation – You don’t need any earthed plug.
**** The product is in accordance with the applicable safety standards in the
European directives.
GENERAL SAFETY WARNINGS FOR POWER TOOLS IN HOUSEHOLD USE
• This glue gun is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or knowledge.
This glue gun can be used by children aged 8 or older and by persons who have
physical, sensory or mental limitations or a lack of experience or knowledge
if a person responsible for their safety supervises them or has instructed
them in the safe operation of the glue gun and they understand the
associated
dangers. Otherwise, there is a danger of operating errors and injuries.
• Supervise children. This will ensure that children do not play with the
glue gun.
• Children must not be allowed to clean and perform maintenance on the glue
gun without supervision.
ADDITIONAL SAFETY INSTRUCTIONS FOR GLUE GUNS
• Do not allow persons unfamiliar with the glue gun or these instructions to
operate the device.
• Before each use of the unit, check the glue gun, cable and plug. If damage
is detected, do not use the glue gun. Never open the glue gun yourself, and
have repairs carried out only by a qualified repair person using only
identical replacement parts. Damaged glue guns, cables and plugs increase
the risk of an electric shock.
• Do not leave the switched on glue gun unattended.
• Keep the glue gun away from rain or moisture. The penetration of water
into the glue gun increases the risk of an electric shock.
• Do not touch the hot nozzle. Danger of burns.
• The mains plug of the glue gun must match the socket outlet. Never modify
the plug in any way. Unmodified plugs and matching outlets will reduce the
risk of electric shock.
• Do not misuse the cord to carry the glue gun, hang it up, or for pulling
the plug out of the outlet. Keep the cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric
shock.
• Have your glue gun repaired only through a qualified repair person and
only using original replacement parts. This will ensure that the safety of
the product is maintained.
• After use, place down the glue gun in a safe manner and allow it to cool
down completely before packing it away. The hot nozzle can cause damage
and/or burns.
• Do not use the cable for pulling the plug out of the socket outlet. Keep
the cable away from heat or oil. Damaged or entangled cables increase the
risk of an electric shock.
2. MACHINE INFORMATION
Intended use
The glue gun is intended for the quick gluing of clean, dry and grease-free
materials with hot-melt adhesives. The tool is intended for hobby use at home
only.
TECHNICAL SPECIFICATIONS
| Model No. | GG501AC |
|---|---|
| Voltage | 220-240V ~ |
| Frequency | 50 Hz |
| Power input | 25W (70W max.) |
| Diameter glue stick | 11.2 mm |
| Weight | ca. 0.24 kg |
DESCRIPTION
Fig. A
- Trigger
- Stand
- Nozzle
- Thermal protection for nozzle
3. OPERATION
- Fold out the stand (2). Put down the appliance.
- Insert a glue stick into the glue gun via the opening at the rear.
- Insert the mains plug into the socket to turn the glue gun on. Wait 3-5 minutes for the glue gun to heat up.
- Press the trigger (1) to release the glue. The amount of pressure needed can be determined by practical testing. Replace the glue cartridge as soon as you notice little if any glue is released from the gun.
- Rest the gun on the support stand (2) between individual gluing runs.
- Remove the mains plug from the socket if you do not intend to use it for some time.
4. MAINTENANCE
Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.
Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at the appropriate recycling
locations.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European
Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must
be collected separately and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this guarantee:
- Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
- Normal wear and tear;
- The tool has been abused, misused or improperly maintained;
- Non-original spare parts have been used.
This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.
The product and the user manual are subject to change. Specifications can be changed without further notice.
DECLARATION OF CONFORMITY
GG501AC – GLUE GUN
We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
EN60335-1, EN60335-2-45, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN62233, 2014/30/EU, 2014/35/EU, 2011/65/EU, 2012/19/EU
Zwolle, 01-03-2022
H.G.F Rosberg
CEO
VONROC • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
©2022 VONROC
WWW.VONROC.COM
2203-25