anslut 019911 LED Strip Light Instruction Manual
- June 4, 2024
- anslut
Table of Contents
anslut 019911 LED Strip Light
SAFETY INSTRUCTIONS
Carefully read the instructions before use!
- Save these instructions for future reference.
- Check that all connections are properly made before switching on the product.
- If the product does not work, check that the circuit is supplied with voltage.
- Keep children at a safe distance from the product when it is in use.
- If the permitted maximum voltage is exceeded this can damage the product, or reduce its useful life.
- If the permitted maximum temperature is exceeded this can damage the product, or reduce its useful life.
SYMBOLS
| **** | Read the instructions. |
|---|---|
| **** | Safety class II. |
| Approved in accordance with the relevant directives.
****| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated voltage, transformer in | 230 V ~ 50 Hz |
|---|---|
| Rated voltage, transformer out | 12 VDC |
| Output | 3 x 1,2 W |
| No. of LEDs | 3 x 12 |
| Colour temperature | 3000 K |
| Luminous flux | 3 x 90 lm |
| LED strip, size | 400 x 8 x 5 mm |
| Cord length | 2000 mm |
| Operating temperature | -20 to 40°C |
| Storage temperature | -20 to 45°C |
INSTALLATION
- Measure the distance between the ends of the light, and mark out and fit the fasteners with the self-tapping screws.
- Put the ends of the light in the fasteners.
- Connect the cord to the LED strip.
- Connect the power cord and switch on.
FIG.1
FIG.2
FIG.3
FIG.4
REMOVAL
-
Remove the small cylinder on the transparent cover with a drill.
FIG. 5 -
Press out the circuit board.
FIG. 6 -
Test the light source by connecting to 12 VDC.
FIG. 7
Documents / Resources
|
anslut 019911 LED Strip
Light
[pdf] Instruction Manual
019911, LED Strip Light, 019911 LED Strip Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>