clemas TRUVOX MULTIWASH PRO SCRUBBER DRYER Owner’s Manual

: June 4, 2024
: clemas

Table of Contents

INTRODUCTION
TECHNICAL SPECIFICATIONS
CLEANING AGENTS
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sales -Hire-Service
TRUVOX MULTIWASH PRO SCRUBBER DRYER
OPERATOR MANUAL

IMPORTANT

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN THEM FOR FUTURE REFERENCE

INTRODUCTION

The following instructions contain important information about the machine and safety advice for the operator. Equipment must be operated, serviced, and maintained in accordance with the manufacturer’s instructions. If in doubt contact the supplier of your machine.

READ ALL INSTRUCTIONS BEFORE USING THE MACHINE

PRODUCT INFORMATION
The Multiwash floor cleaning machines are designed for use on smooth, even floors in indoor areas. They can be used on most floor surfaces including short-pile carpet, wood, PVC, rubber, and stone. This machine is for indoor use only. The machine is intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offices, rental businesses, and other than normal housekeeping purposes.

EC Declaration of Conformity
Machine Type: Floor cleaning machine
Model: MWPRO240…, MWPRO340…, MWPRO440…
This machine is in conformity with the following EU directives:

Machinery Directive 2006/42/EC
The EMC Directive 2014/30/EU

Applied harmonized standards:
BS/EN60335-1, BS/EN60335-2-72, BS/EN55014-1, BS/EN55014-2, BS/EN61000-3-2, BS/EN61000-3-3, BS/EN62233,
Truvox International Limited Unit C (East), Hamilton Business Park, Manaton Way, Botley Road Hedge End, Southampton, SO30 2JR, UK

Malcolm Eneas
Operations Director
Southampton, 07/05/2021

TECHNICAL SPECIFICATIONS

Model| Multiwash Pro 240| Multiwash Pro 340| Multiwash Pro 440
---|---|---|---
Product Code| MWPRO240| MWPRO340| MWPRO440
Voltage AC (~)/ Frequency| V/Hz| 230/50| 230/50| 230/50
Motor Power (+ pump)| W| 750 + 26| 950 + 26| 1150 + 26
Solution tank capacity| liters| 4| 4| 4
Productivity Rate| m²/h| 250| 350| 450
Brush width| cm| 24| 34| 44
Brush speed| rpm| 650| 650| 650
Brush pressure| g/cm²| 220| 190| 170
Sound pressure level| dB(A)| 69| 69| 71
Dimensions (L x W x H)| cm| 39 x 35 x 111| 39 x 45 x 111| 39 x 55 x 111
Weight| kg| 21.5| 26.5| 31.0
Cable length| m| 12| 12| 12
Warranty| | 1 year

Handle vibration does not exceed 2.5 m/s² when operating on a smooth hard surface.
Noise levels were measured at a distance of 1 meter from the machine and 1.6 meters above the floor when washing a hard floor. Measurements were recorded using a handheld meter.
The above dimensions are approx. Since the company’s policy is to continuously improve the product, there could be changes without prior notice.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the environment and human health. Please refer to your local waste authority for information on return and collection systems in your area.

IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic precautions and supplements standards in force in the country where the machine is used.
This symbol warns the operator of hazards and unsafe practices which could result in severe personal injury or death.
WARNING – to reduce the risk of injury, electric shock, or fire.

This machine must only be used for the manufacturer’s approved application as described in this manual.
The machine must be unpacked and assembled in accordance with these instructions before connecting to the electrical supply.
Only genuine accessories and spare parts provided with the machine or those approved by the manufacturer should be used. The use of other accessories may impair the safety of the machine. All repairs must be performed by a qualified service agent.
DO NOT modify the machine from its original design.
Operators must be fully trained in the use of the machine in accordance with these instructions, able to perform regular user maintenance, and have the correct selection of accessories.
Operators should be physically capable to maneuver, transport, and operate the machines.
Operators should be able to recognize the unusual operations of the machine and report any problems.
This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the machine by a person responsible for their safety.
Keep children and unauthorized persons away from the machine when in use. DO NOT use it as a toy.
DO NOT use it if it has been damaged, left outdoors, or dropped in water.
DO NOT use where hazardous dust is present.
DO NOT use in an explosive atmosphere.
DO NOT pick up or use near flammable or combustible fluids, hazardous dust, or vapors.
CAUTION – If it is suspected that there is hazardous dust or flammable/corrosive material, stop cleaning the area immediately and consult your superior.
DO NOT use to clean up any burning or lighted materials such as cigarettes, matches, ashes, or other combustible objects.
Only use the machine on firm-level surfaces. DO NOT use on a gradient or slope of more than 2%.
DO NOT use on rough uneven surfaces e.g. industrial or coarse concrete surfaces.
DO NOT use outdoors e.g. on patios, decks, or rough surfaces.
CAUTION – This machine is for dry indoor use only and should not be used or stored outdoors in wet conditions.
Take care when using a machine near the top of the stairs to avoid overbalancing.
DO NOT cover the machine when in use.
DO NOT run the machine dry, as this could damage the floor surface or the machine itself.
DO NOT leave the machine running unattended.
Keep hair, loose clothing, hands, feet, and all other parts of the body away from openings and moving parts.
DO NOT put any object into openings. DO NOT use with any opening blocked; keep free of dust, debris, and anything that may reduce airflow.
DO NOT use volatile or combustible solvents (e.g. diesel/petrol/IPA/trichloromethane) nor any corrosive, toxic, or highly irritant substances to wash floors, even if diluted. In the event of accidental contact with any such substances(e.g. due to spills) follow the decontamination procedures in force at the user site. If in any doubt about
the condition of the machine, contact Truvox or the dealer/agent who supplied the machine.
DO NOT operate the machine if it malfunctions or is damaged in any way. Contact an authorized service agent for repair or adjustments.
DO NOT leave the machine connected to the electricity supply when not in use, always remove the plug from the socket-outlet.
WARNING DO NOT fill the machine with water hotter than 40ºC.
USE ON ESCALATORS
Ensure the machine is positioned at the bottom of the escalator with the escalator moving towards the operator.
CAUTION – Risk of electric shock
DO NOT operate the machine with a damaged power cord or plug, or after the machine malfunctions or is damaged in any way. Contact an authorized Service Agent for repair or adjustment.
The machine must be kept clean and in good condition with regular inspections of the power cord and plug for signs of any damage. If any parts are damaged they shall only be replaced by an approved part by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard.
Only replace the power cord with the type specified in the instruction manual.
When unplugging, pull the plug, not the power cord.
WARNING: Keep the power cord clear of moving parts.
DO NOT kink or twist the power cord and keep the cord away from heated surfaces.
The power cord plus any extension leads should not exceed 30 meters in total. The cross-section of an extension cable wiring must be at least 2.5mm².
DO NOT pull or carry by the power cord. DO NOT use cord as a handle, close door on cord, or pull cord around sharp edges or corners.
Switch off the machine before removing the plug.
DO NOT operate switches or touch the mains plug with wet hands as this may cause electric shock.
This machine should always be connected to a fully earthed power supply of the right voltage and frequency.
The machine shall be disconnected from its power source when not in use and before commencing cleaning of the machine or maintenance and when replacing parts or accessories, by removing the plug from the socket-outlet.

FOR UK MARKET
Plug: Moulded plug, UK standard, 3 pins, 250V, 13A rated with BS approval and in-built fuse.
Cable: 3 x 1.0 SQ mm PVC insulated Cable, type H05VV-F with VDE/KEMA-KEUR approval.
Connector: Moulded connector, 250V,10A rated, IEC C13 Connector with BS approval.

CLEANING AGENTS

When using cleaning and care agents, the manufacturer’s danger warnings must be followed and protective goggles and clothing must be worn.
Only use low-foaming, non-combustible cleaning agents which DO NOT contain generally health-hazardous substances.
Please ensure that after each use any chemical residue is rinsed out with clean water.

BRUSH IDENTIFICATION
Red, Blue, White, and Yellow brush buttons are packed with the machine. Simply plug the buttons into the hole in the brush as shown. Clear identification, by color coding, helps prevent cross-contamination.
TRANSPORTING THE MACHINE

Take extreme care when moving the machine up or down steps or stairs.
Incorrect lifting techniques may result in personal injury. We advise that the manual handling regulations are followed. Carefully wrap the power cord and store it in a dry indoor location.
DO NOT expose the machine to rain or moisture.
When transporting the machine ensure that all components, tanks, and removable parts are securely fastened and that the power cord and plug are not trailing.
Do not lift or transport the machine whilst containing liquid as this will add considerably to the weight.
When transporting the machine the handle should be locked in the upright position.

STORAGE

Always switch off the machine after use.
Always empty, wipe down, and dry the machine after use.
Both the solution and recovery tanks should be emptied and flushed out with clean water to ensure the seals and pumps are free from any cleaning detergents.
Wrap the power cord around the cable winder ensuring that the plug is not trailing on the floor.
Store the machine in a dry indoor area only.

MAINTENANCE

WARNING – Before undertaking maintenance operations or adjustments switch off the machine and unplug from the electricity supply.
IMPORTANT – All other servicing and repairs should only be performed by a Truvox engineer or Authorised Service Agent.

IMPORTANT – Should the machine fail to operate please refer to the fault diagnosis section at the back of this instruction manual. If the problem/remedy is not listed please contact Truvox Customer Service Department for rapid attention. The machine requires minimum maintenance apart from the following checks by the operator prior to use:

Body of the machine – Clean with a damp cloth.
Power cord – Regularly inspect sheath, plug, and cord anchorage for damage or loose connection. Only replace the power cord with the type specified in these instructions.
Brushes – For maximum life, wash the brushes regularly.
Ensure the machine is in Transport mode when not in use. Store additional brushes in a vertical position to avoid bending of bristles. Check for permanent bending of bristles in a particular direction. This may occur if the machine is operated for several days without removing the brushes, which is not recommended. If this occurs, reverse the brush so that the bent bristles are automatically straightened.
Wiper Blade – After years of use, the wiper blade may wear. If this occurs the water collection performance will decrease. It should be replaced by an authorized service agent.
Solution feed filter – The filter prevents clogging of the spray nozzle and should be periodically cleaned.
Nozzle maintenance – If the spray of the nozzle becomes blocked, slide the nozzle cover off and remove the nozzle. Wash the nozzle in clean water, ensuring that the nozzle is clear before refitting.

AFTER-SALES SERVICE
Truvox machines are high-quality machines that have been tested for safety by authorized technicians. It is always apparent that after long working periods, electrical and mechanical components will show signs of wear and tear or aging. To maintain operational safety and reliability the following service interval has been defined: Every year or after 250 hours. Under extreme or specialized conditions and/or insufficient maintenance, shorter maintenance intervals are necessary. Use only original Truvox spare parts. The use of other spare parts will invalidate all warranty and liability claims. Should you require after-sales service please contact the supplier from whom you purchased the machine, who will arrange service. Repairs and servicing of Truvox products should only be performed by trained staff. Improper repairs can cause considerable danger to
the user.

GUARANTEE
Your product is guaranteed for one year from the date of original purchase, or hire purchase, against defects in materials or workmanship during manufacture. Within the guarantee period we undertake at our discretion, to repair or replace free of charge to the purchaser, any part found to be defective, subject to the following conditions:

CONDITIONS

Claims made under the terms of the guarantee must be supported by the original invoice/bill of sale issued at the time of sale, or the machine Serial No.
For claims under this guarantee contact the supplier from whom you purchased the product who will arrange the appropriate action. Do not initially return the product as this could result in transit damage.
Neither Truvox nor its distributor shall be liable for any incidental or consequential loss.
This guarantee is governed by the laws of England.
This guarantee does not cover any of the following:
• Periodic maintenance, and repair or replacement of parts due to normal wear and tear.
• Damage caused by accident, misuse or neglect, or the fitting of other than genuine Truvox parts.
• Defects in other than genuine Truvox parts, or repairs, modifications, or adjustments performed by other than Truvox service engineer or authorized service agent.
• Costs and risks of transport relating directly or indirectly to the guarantee of this product.
• Consumable items such as brushes, drive discs, filters, and vacuum skirts.
This guarantee does not affect your statutory rights or your rights against the supplier arising from their sales or purchase contract. Truvox International Limited’s policy is one of continual product development and we reserve the right to alter specifications without prior notice.

RECOMMENDED SPARES & ACCESSORIES

Item	MWPRO240	MWPRO340	MWPRO440
Standard brush – black (PK of 2)	90-0727-0000	90-0728-0000	90-0729-0000
Standard brush – yellow (PK of2)	–	90-0871-0000	–
Standard brush – blue (PK of 2)	–	90-0874-0000	–
Standard brush – green (PK of 2)	–	90-0877-0000	–
Standard brush – red (PK of 2)	–	90-0880-0000	–
Soft brush – grey (PK of 2)	90-0730-0000	90-0731-0000	90-0732-0000
Side brush – black(1 required)	90-0722-0000	90-0723-0000	90-0724-0000
Hard brush – blue (PK of 2)	90-0733-0000	90-0734-0000	90-0735-0000
Escalator brush – blue (PK of 2)	90-1019-0000	90-1020-0000	90-1021-0000
7 liter tank	90-0726-0000
Trolley (for all models)	05-4779-0000

FAULT DIAGNOSIS
The following simple checks may be performed by the operator. If the machine is still not working, please contact your local Service Agent:

Trouble	Reason	Remedy
The machine fails to start – no power	• Transport working lever is
in the bottom position (see picture 2 on page 18)	• Change to operating

position (see pictorial guide)
• Motor overload protector has tripped| • Wait for 1 hour to allow the motor temperature to reach room temperature. Then try again.
• Transport wheels not raising off the ground when handle lowered| • Check for debris and clean the machine.
• Lack of voltage / electrical supply| • Check fuse *, power cord, plug, and socket outlet
The machine fails to pick up water from the floor| • Incorrectly fitted/damaged recovery tank| • Refit or replace recovery tank
• Worn brushes| • Check brush pressure, if needed replace brushes.
• Drum not rotating| • See below
Drum not rotating| • Debris around drum or base of the machine| • Clean drum and base of the machine.
The drum is rotating, but the brushes are not| • Debris around brushes| • Clean or replace brushes
The machine fails to spray solution onto the floor| • Faulty pump| • If there is no noise present from the pump, check that the pump cable is fitted correctly.
• Improper water hose connection| • Check the quick lock connector for proper fitting
• No solution in the solution tank| • Fill solution tank
• Blocked jet| • Clean jet
• Blocked inline filter| • Clean inline filter
• Blocked filter or faulty valve in the solution tank| • Clean / replace filter or valve
The motor makes a humming noise but does not turn| • Debris around drum and base of the machine| • Clean drum and base of the machine
The machine is vibrating| • Bristles on the brushes are deformed| • Soak brushes in a bucket of water
• Replace both brushes

If the fuse blows several times, the machine should be checked by an authorized Service Agent.

PLEASE REFER TO THE BACK OF THE MANUAL FOR PICTORIAL INSTRUCTIONS clemas
TRUVOX MULTIWASH PRO SCRUBBER DRYER - fig clemas TRUVOX MULTIWASH PRO SCRUBBER DRYER -
fig1