VEVOR ZX0901-7B Hydraulic Motorcycle Lift Table User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR ZX0901-7B Hydraulic Motorcycle Lift Table
We continue to be committed to providing you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again about any technology or software updates on our product.
Main specifications
Model
| Capacity (lbs)| ****
MIN
height(mm)
| ****
MAX
height(mm)
| ****
G.W.(kg)
| ****
N.W.(kg)
| Packing size(mm)
---|---|---|---|---|---|---
ZX0901-7B
| ****
350
| ****
340
| ****
905
| ****
31.7
| ****
29.7
| ****
485×480×405
Caution
- The maximum load is 350 LBS. DO NOT exceed this rated capacity.
- Use this lift for lifting purposes only. DO NOT use it for any other purpose it is not designed to perform.
- Keep children and unauthorized persons away from the work area.
- Only use this lift on a surface that is stable, level, dry not slippery, and capable of sustaining the load Keep the surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
- Before lifting ensure the motorcycle is adequately secured to the lifting platform with thread knobs, big washers, J-hooks and U-bolts.
- When the platform has been used to the working height, ensure the locking ban is engaged to prevent accidental lowering.
- Always keep your hands and feet away from moving parts.
- When work is done, check under the lift and motorcycle to ensure that there are no obstructions and that it is safe to lower the unit. Remove the locking bar and then SLOWLY tug the release valve to GENTLY lower the lift.
- DO NOT allow untrained persons to operate the lift.
- DO NOT make any modifications to this motorcycle lift.
- DO NOT expose the lift to rain or snow.
- Ensure that you read, understand and apply the safety instructions and warnings before use. Failure to heed these instructions may result in property damage and/or personal injury.
MAINTENANCE
- When not in use, the lift must be stored in the lowest position in a dry location to minimize ram and piston corrosion.
- Keep the lift clean and wipe off any oil or grease. Lubricate all moving parts.
- Periodically check the ram and piston for signs of corrosion. Clean exposed areas with a clean oiled cloth.
- Before each use check all parts. If any part of the lift is damaged or suspected, remove the lift from service and take necessary action to repair it.
- When lift efficiency drops, open the release valve and pump the lift foot pedal rapidly 15 to 20 times to purge away air from the hydraulic system
Main construction
PART NO| ****
DESCRIPTION
| ****
QTY
| PART NO| ****
DESCRIPTION
| ****
QTY
---|---|---|---|---|---
1| Panel| 1| 19| safety pin components| 1
2| M6 Hex Nut| 8| 20| Wire pin| 1
3| Chain| 2| 21| Pin roll| 1
4| Hook| 2| 22| Oil return hand wheel components| 1
5| Washer| 2| 23| Pin roll| 1
6| Iron hand wheel| 2| 24| Pump mounting plate| 1
7| φ6 Washer| 4| 25| Φ8 Washer| 18
8| M6 U- Bolt| 2| 26| M8 lock nut| 2
9| Large Roller| 2| 27| 3″ universal caster| 2
10| supporting frame| 1| 28| M8 Hex Nut| 16
11| M1265 Hex Nut| 1| 29| 3″ caster wheel with brake| 2
12| Pump parts| 1| 30| M550 Hex Bolt| 8
13| φ12 Washer| 1| 31| Base| 1
14| M12 lock nut| 1| 32| block| 8
15| Pedal components| 1| 33| Φ5 Washer| 16
16| M825 Hex Bolt| 2| 34| M5 Hex Nut| 8
17| M825 Hex Bolt| 17| 35| Small Roller| 2
18| B- shaped pin| 3| 36| pad| 2
EU Importer: WAITCHX， 250 bis boulevard Saint-Germain 75007 Paris
UK Importer: FREE MOOD LTD, 2 Holywell Lane, London, England, EC2A3ET
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt
Manufacturer: Zhejiang Zhongxing Machinery ManufacturingCo., LtdAddress:
Nanhu Daqiao Shuanglong Road 3065 Jiaxing, Zhejiang, ChinaMADE IN CHINA
Technical Support and E-Warranty Certificate
www.vevor.com/support
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>