ONSET MX2203 Hobo MX Tidbit Pendant Bluetooth Deep Waterproof Data Loggers User Guide
- June 6, 2024
- Onset
Table of Contents
Quick Start for the HOBO®
TidbiT®
MX Temp 400 (MX2203) & Temp 5000 (MX2204) Logger:
-
Download HOBOconnect™ to your phone or tablet.
-
Open the app. Enable Bluetooth® in your device settings if prompted.
-
Firmly press the magnetic HOBO button near the center of the logger to wake it up.
Both LEDs on the logger will blink once when it wakes up. Tap Devices in the app.
Tap the logger in the app to connect to it.
If the logger does not appear in the list, make sure the logger is within range of your device.
-
Tap to set up the logger.
Choose your logger settings:
Note: that the default Bluetooth setting for the logger is Bluetooth Always On, which means it will “advertise” or regularly send out a Bluetooth signal for the phone or tablet to find via the app.
This setting uses battery power.
You can change this to one of the following power-saving modes: -
Deploy the logger to the location where you will be monitoring the conditions. Follow the deployment guidelines in the full product manual (see a link to the right).
-
To offload data from the logger:
a. Tap Devices.
b. If the logger was configured with Bluetooth Always On, continue to step
c. Connect to the logger in the app and tab
d. To view or export, and share the data, tap HOBO Files, tap, and then .
- Bluetooth Always Off. The logger will only advertise when you press the HOBO button on the protective logger boot to wake it up.
- Bluetooth Off Water Detect. The logger will only advertise when it is out of water. When it is in water, the Bluetooth signal is automatically disabled.
Tap to save the settings to the logger.
The logger will begin logging data based on the settings you selected. Press the HOBO button for 3 seconds If you configured the logger to start logging with a button push (logger LEDs will blink 4 times).
https://www.onsetcomp.com/manuals/mx2203-mx2204
For specifications and detailed information about the logger, scan the code at left or go to www.onsetcomp.com/manuals/mx2203-mx2204.
WARNING: Do not cut open, incinerate, heat above 85°C (185°F), or
recharge the lithium battery. The battery may explode if the logger is exposed
to extreme heat or conditions that could damage or destroy the battery case.
Do not dispose of the logger or battery in fire. Do not expose the contents of
the battery to water. Dispose of the battery according to local regulations
for lithium batteries.
© 2017–2020 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOconnect are trademarks or registered trademarks of Onset Computer Corporation. App Store is a service mark of Apple Inc. Google Play is a trademark of Google LLC. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective companies
This product has been manufactured by Onset Computer Corporation and is in compliance with Onset’s ISO 9001:2015 Quality Management System.
Patent #: 8,860,569
21539-G MAN-MX2203-MX2204-QSG
1-800-LOGGERS (564-4377)
•508-759-9500
www.onsetcomp.com/support/contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>