PYLE PDMIC58 Professional Dynamic Microphone User Guide
- June 9, 2024
- Pyle
Table of Contents
PDMIC58 – PDMIC59
Professional Dynamic Microphone
Unidirectional Handheld Mic,
Includes XLR Audio Cable
USER GUIDE
Handling & Precautions
Covering and/or obstructing the microphone top mesh grill and internal mic receiver diaphragm element will result in less than optimal performance, causing audio distortion and interfered sound signal. To avoid such audio interferences try decreasing the audio source’s volume, than position the microphone diaphragm so that it is not directly pointed or exposed to the external audio source; allow sufficient separation distance between the microphone and external audio source. The microphone internal system contains sensitive audio equipment and electronic components, do not drip, hit or expose to forceful impact. Do not store or operate the microphone in a high temperature, or high humidity, environment.
Operation & Performance
The optimum placement distance of the microphone and vocals (distance from your mouth to the microphone grill) is from 5 to 10 centimers. If the microphone placement is too close to your mouth, the sound and audio pickup performance may be unclear, outputting excessive bass and distortion in the audio tone.
Microphone Connection
Align the output connector with the slotted insert of the incoming connection cable — ensure the connector alignment is positioned properly and adequate pressure is used when inserting the connection (you may hear a “click” sound to ensure proper connection). To unplug the microphone, hold down the button lab, and ensure it is depressed, then pull the connection cable outward gently.
500Hz
6400Hz
PICKUP PATTERN
TYPICAL FREQUENCY RESPONSE
Features:
- Built-in Acoustic Pop Filter
- Ultra-Wide Frequency Response
- High Signal Output for Vocals & Singing
- Rugged Construction & Steel Mesh Grill
- Integrated Low Noise Circuitry
- Includes: 15′ ft. XLR to 1/4” Audio Connection Cable
- Perfect for Stage Performances or In-Studio Use
Technical Specs:
- Mic Element/Type: Dynamic
- Pickup/Polar Pattern: Uni-Directional
- Mic Body Material: Zinc Alloy Metal
- Frequency Response: 50Hz-15KHz
- 600 Ohm Output Impedance (+/-)30%
- Microphone Sensitivity: -54dB (+/-)3db(0dB=1V/Pa @ 1KHz)
PDMIC58 PDMIC59
PDMIC58 PDMIC59
Questions? Comments?
We are here to help!
Phone: (1)718-535-1800
Email: support@pyleusa.com
Documents / Resources
| PYLE
PDMIC58 Professional Dynamic
Microphone
[pdf] User Guide
PDMIC58, PDMIC59, PDMIC58 Professional Dynamic Microphone, PDMIC58,
Professional Dynamic Microphone, Dynamic Microphone, Microphone
---|---
| PYLE
PDMIC58 Professional Dynamic
Microphone
[pdf] User Guide
PDMIC58, PDMIC59, Professional Dynamic Microphone, Dynamic Microphone,
Professional Microphone, Microphone, PDMIC58 Dynamic Microphone
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>