OLIGHT Version B Portable Long Range EDC Flashlight User Manual

: September 24, 2024
: OLIGHT

Table of Contents

OLIGHT Version B Portable Long Range EDC Flashlight
Product Information
Product Usage Instructions
FAQ
IN THE BOX
Multi-language dictionary
Product specifications
Operating Instructions
Indicators Instructions
Disposal and Recycling Information
FCC STATEMENT
Declaration of Conformity
WARRANTY
CONTACTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLIGHT Version B Portable Long Range EDC Flashlight

Product Information

Specifications

Light Source: MAX 10.8W/LED COOL WHITE CCT: 6,500~7,500K CRI:70
Turbo:
- 1,000 lumens
- 2.5min at 100%
- 92min at 38%
High:
- 300 lumens at 100%
Medium:
- 60 lumens at 100%
- 103min at 20%
- 18min at 100%
- 10h
Low:
- 10 lumens at 100%
- 60h
Moonlight:
- 1 lumen at 100%
- 50 days
Dimensions: (L)81.7(D)29mm or (L)3.22(D)1.14in
Rechargeable Li-ion Battery: 1100mAh 3.6V (3.96Wh)
Working Temperature: IPX8

Product Usage Instructions

Remove the Insulating Film: Before using the flashlight, make sure to remove the insulating film.
Charge the Flashlight: Use the USB Magnetic charging cable provided. Red light indicates charging, and green light indicates charging completed.
Turn On/Off the Light: Press the button to turn on/off the light.
Lock/Unlock: Press and hold for more than 1 second to lock the flashlight; press and hold for more than 2 seconds to unlock.
Moonlight Mode: Press and hold for 1 to 2 seconds to activate Moonlight mode.
Turbo Mode: Activate Turbo mode by following the instructions in Figure 6.
Change Brightness Level: Double press quickly for Turbo mode or follow the instructions in Figure 8.
Strobe Mode: Press and hold to activate Strobe mode.
Auto Shut-Off Function: Press three times quickly for a specific timing setting or double press and hold for another timing setting.

FAQ

Frequently Asked Questions

Q: How do I know the battery level of the flashlight?
- A: The battery level is indicated by different colors: Green indicates varying levels between 75% and 10%, while red indicates below 10%.
Q: How do I lock and unlock the flashlight?
- A: To lock the flashlight, press and hold the switch for about 2 seconds until Moonlight mode turns on and off. To unlock, press and hold the switch for 1 second or longer.
Q: How do I activate Turbo mode?
- A: Follow the instructions provided in Figure 6 to activate Turbo mode on the flashlight.

IN THE BOX

Multi-language dictionary

Multi-language dictionary, see Table 3

Product specifications

Product specifications, see Table 1 and Table 2

Table 1: SPECIFICATIONS

Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.

Table 2: USB Magnetic charging cable

Operating Instructions

Operating instructions as below:

Remove the insulating film before use, see Figure 1.
Charge the flashlight, see Figure 2.

Turn On/Off the flashlight, see Figure 3

Press the button to turn on/off the flashlight. When turned on, the flashlight will light up at the memorized brightness level. (Moonlight, Low, Medium, and High modes will be memorized when turned off. Turbo mode will be memorized as High mode; High mode output will be memorized for 1 minute before switching to Medium mode; Strobe mode will not be memorized.)

Lock/Unlock, see Figure 4

To lock the flashlight, when it’s off, press and hold the switch (for about 2 seconds) until the Moonlight mode turns on and off. In lockout mode, press the switch once to display the remaining battery level without turning on the flashlight. Press and hold the switch for 1 second or longer to unlock it and activate Moonlight mode.

Moonlight mode, see Figure 5

To activate Moonlight mode, press and hold the button for 1 second or longer when the flashlight is off.
If the last used mode was Moonlight mode, simply press the button.

Turbo mode, see Figure 6

Quickly double-press the button to enter Turbo mode.

Strobe mode, see Figure 7

Quickly press the button three times or more to enter Strobe mode.
Press the button once or hold it down to exit Strobe mode.

Change the brightness level, see Figure 8

When the flashlight is on, press and hold the button.
The flashlight will cycle through Low, Medium, and High modes, starting from the present brightness level.
Release the button to select the desired brightness level. (Note: Moonlight mode and Turbo mode are not included in this cycle).

Auto Shut-Off function, see Figure 9

The flashlight can be set to automatically turn off after two preset periods: a long period (9 minutes) and a short period (3 minutes). To activate the Auto Shut-Off function, double-press and hold the button when the flashlight is on. After the function is turned on, the light will flash once to indicate that the short period is set, and twice for the long period. To switch between timing periods, double-press and hold the button during a timing period. When reactivating the Auto Shut-Off function, the previous timing setting will be used.

Indicators Instructions

Indicators instructions as below

Brightness level indicator, see Figure 10-1.
Battery level indicator, see Figure 10-2.

Note: When an Olight 18350 battery with a level below 10% is removed and reinserted, the light will detect it as a single-use battery, and the battery and brightness indicators will not light up when the light is turned on.

Disposal and Recycling Information

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, to protect human health and the environment, you should dispose of your waste equipment at a designated collection point for the recycling of WEEE, appointed by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

FCC STATEMENT

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED Notice

This device complies with Industry Canada’s ICES standard(s). Operation is subject to the following two conditions:

this device may not cause interference.
this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-005.

Declaration of Conformity

EU Declaration of Conformity Hereby

Hereby Dongguan Olight E-Commerce Technology Co.,Ltd declares that the equipment [Baton Turbo] is in compliance with Directive 2014/30/EU and RoHS Directive 2011/65/EU & (EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.olight.com/download.

Caution: Do not stare at operating light source.

WARRANTY

We are proud to offer a lifetime warranty in Australia, China, France, Germany, and the USA. We are also working hard to expand coverage to more countries, where we provide a 2 or 5-year warranty.
The warranty covers defects in material and workmanship under normal use, excluding loss, theft, deliberate damage, or cosmetic damage.
For complete warranty information, please visit Olight.com or your local Olight official website.