JBL C60PS/T Pendant Subwoofer with Crossover Specification and Datasheet

JBL C60PS/T Pendant Subwoofer with Crossover

Key Features

• High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers.
• 200 mm (8 in) long-excursion driver.
• 8 ohm (150 Watt) and 70V/100V (100 Watt) operation.
• Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy-to-adjust clamp.
• Stylish design, available in black or white (-WH).
• UL listed (speaker and hanging cable system).

Applications

The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low-frequency driver features a butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high duty-cycle, working conditions.

The Control 60PS/T may be driven by itself (or with other subwoofers) on an amplifier channel, sending it either a signal that has been actively low-passed earlier in the signal chain via DSP or a full-range signal, utilizing the built-in passive 125 Hz low-pass filter. The included passive crossover also provides high-passed satellite outputs for use with either two or four satellite loudspeakers (not for one or three satellite speakers), resulting in a full-range, wide-bandwidth, passively-crossed, mono subwoofer-satellite system. Using the built-in passive crossover is best suited for satellite speakers with sensitivities in the 82 dB to 86 dB (2.83V @ 1m) range, resulting in a well-balanced overall frequency response.

A 100 Watt multi-tap, wide-bandwidth, low-saturation transformer allows the speaker to be used on either a 70V/100V distributed speaker system or as a direct low-impedance 8 speaker. If satellite speakers are used on the 70V/100V settings, the satellite speakers should be low-impedance (8 to 16 each). A loop-out connector is provided on the subwoofer for looping the full-range input signal to other loudspeakers or to other subwoofer/satellite systems. Rubber boot covers for each locking connector protect the terminals and the optional MTC-PC60 full-top cover accessory adds additional terminal protection for when using outdoors.

Specifications

System:

• Frequency Range (-10 dB)1: 42 Hz – 350 Hz
• Frequency Response (± 3 dB)1: 55 Hz – 125 Hz
• Power Capacity2: 300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs
• Nominal Sensitivity (2.83V/1m): 88 dB
• Rated Maximum SPL: 107 dB @ 1 m (3.3 ft) average, 113 dB peak
• Rated Impedance: 8 ohms
• Transformer Taps: 110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8 settings) on top terminal panel
• Transformer Insertion Loss: 0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W
• Standalone Hookup: Connect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with the Input connector (pre-low-pass filter) for sending to additional speakers.
• Subwoofer-Satellite Hookup: For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall), and Control 42C (in-ceiling). Satellite speakers are to be low-Z type (8 to 16 ) regardless of whether the tap selector is set to low-Z or 70V/100V. Loop Out in parallel with the Input connector (pre-low-pass filter) for sending to additional speakers.
• Transducer: 200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.

Enclosure:

• Enclosure Material: High-impact polystyrene
• Grille: Zinc-plated steel grille with a powder-coat finish, foam backing (grille and grille backing is removable for painting)
• Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof rating
• Termination: Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.
• Suspension: Two identical suspension cable systems (one as the main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. The cable has a SWL rating of 45 kg (99 lb).
• Safety Agency: Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. The suspension system and Gripple®- brand cable fastener are listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
• Dimensions: 333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to the top of the suspension bracket.
• Net Weight: 7.6 kg (16.7 lb)
• Shipping Weight: 17.6 kg (38.7 lbs) per pair-packed carton
• Included Accessories: Two suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, and six rubber cover boots for euro-block connectors.
• Optional Accessories: MTC-PC60 full top panel / terminal cover. Wire access holes in the plastic cover are to be drilled by the installer to suit the number and dimensions of the wire.
• Colors: Available in black or white (-WH). Paintable.

Full-space (suspended) Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program power is a conservative expression of the system’s ability to handle normal speech and music program material and is defined as 3 dB above the Continuous Pink Noise Rating. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.

Control 60PS/T 8” Pendant Sub-Woofer with Crossover

Frequency Response:

Full Space (4 ), suspended

Impedance:

Dimensions:

WIRING:

JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A. © Copyright 2014 JBL Professional www.jblpro.com

FREQUENTLY ASKED QUESTIONS

What is the JBL C60PS/T Pendant Subwoofer with Crossover?

The JBL C60PS/T is a pendant-style subwoofer designed for commercial audio installations, providing low-frequency reinforcement in a pendant form factor.

What is the purpose of the C60PS/T Pendant Subwoofer?

The C60PS/T Pendant Subwoofer is designed to enhance the low-frequency response and overall audio performance in commercial spaces such as restaurants, retail stores, or conference rooms.

What is the power handling capacity of the C60PS/T Subwoofer?

The power handling capacity of the C60PS/T Subwoofer is typically specified by JBL and can vary between models.

Does the C60PS/T Subwoofer come with a built-in crossover?

Yes, the C60PS/T Subwoofer includes a built-in crossover that allows for seamless integration with satellite speakers or other audio components.

What is the pendant form factor?

The pendant form factor refers to the design of the subwoofer, which is intended to be suspended from the ceiling using a pendant mount.

Can the C60PS/T Subwoofer be used in outdoor installations?

The C60PS/T Subwoofer is not specifically designed for outdoor use and may not have the necessary weatherproofing for such installations.

Can multiple C60PS/T Subwoofers be used together in a system?

Yes, multiple C60PS/T Subwoofers can be used together to provide even bass coverage in larger commercial spaces.

Does the C60PS/T Subwoofer include mounting hardware?

Yes, the C60PS/T Subwoofer typically includes pendant mounting hardware for easy installation.

Can the C60PS/T Subwoofer be used with JBL satellite speakers?

Yes, the C60PS/T Subwoofer can be paired with JBL satellite speakers to create a full-range audio system.

What is the sensitivity rating of the C60PS/T Subwoofer?

The sensitivity rating of the C60PS/T Subwoofer is typically specified by JBL and can vary between models.

Does the C60PS/T Subwoofer require an external amplifier?

Yes, the C60PS/T Subwoofer requires an external amplifier to provide power for proper operation.

Can the C60PS/T Subwoofer be painted to match the ceiling or décor?

Yes, the C60PS/T Subwoofer is usually paintable, allowing you to match it to the color of the ceiling or blend it with the surrounding environment.

What is the size and weight of the C60PS/T Subwoofer?

The size and weight of the C60PS/T Subwoofer can vary between models and should be checked in the product specifications provided by JBL.

Is the C60PS/T Subwoofer suitable for home theater applications?

While primarily designed for commercial installations, the C60PS/T Subwoofer can be used in home theater applications where pendant-style subwoofers are desired.

Can the C60PS/T Subwoofer be used in conjunction with other JBL speakers?

Yes, the C60PS/T Subwoofer can be used in combination with other JBL speakers to create a complete audio system.

DOWNLOAD THE PDF LINK:JBL C60PST Pendant Subwoofer with Crossover Specification and Datasheet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>