DELL OptiPlex 7000 Micro Desktop Computer User Guide

June 4, 2024
Dell

DELL OptiPlex 7000 Micro Desktop Computer LOGO

DELL OptiPlex 7000 Micro Desktop Computer

Set up your computer

  1. Connect the keyboard and mouse.DELL OptiPlex 7000 Micro Desktop Computer FIG 1

  2. Connect to your network using a cable, or connect to a wireless network later on.DELL OptiPlex 7000 Micro Desktop Computer FIG 2

  3. Connect the display.DELL OptiPlex 7000 Micro Desktop Computer FIG 3

  4. Connect the power cable.DELL OptiPlex 7000 Micro Desktop Computer FIG 4

  5. Press the power button.DELL OptiPlex 7000 Micro Desktop Computer FIG 5

  6. Finish operating system setup.
    For Ubuntu:
    Follow the on-screen instructions to complete the setup. For more information about installing and configuring Ubuntu, see the knowledge base articles 000131655 and 000131676 at www.dell.com/support.

  7. Locate and use Dell apps from the Windows Start menu—Recommended

Table 1. Locate Dell appsDELL OptiPlex 7000 Micro Desktop Computer FIG
6 DELL OptiPlex 7000 Micro Desktop Computer FIG
7

Views of OptiPlex 7000 Micro

DisplayDELL OptiPlex 7000 Micro Desktop Computer FIG
8

  1. Power button with diagnostic LED
  2. Hard-disk activity light
  3. Re-tasking line out/line in audio port
  4. Universal audio jack
  5. USB 3.2 Gen 2 port with PowerShare
  6. USB 3.2 Gen 2×2 Type-C port

Back (65 W)DELL OptiPlex 7000 Micro Desktop Computer FIG
9

  1. External antenna connector (Optional)
  2. One optional port HDMI 2.0b/Displayport 1.4a (HBR3)/VGA/PS2/serial/USB Type-C with DisplayPort Alt mode
  3. DC-in cable clip
  4. USB 3.2 Gen 1 port with Smart Power on
  5. Kensington security-cable slot and Padlock ring
  6. 7.4 mm barrel power adapter port
  7. Three DisplayPort 1.4a (HBR2)
  8. Service tag
  9. Two USB 3.2 Gen 2 ports
  10. RJ45 Ethernet port

Back (35 W)DELL OptiPlex 7000 Micro Desktop Computer FIG
10

  1. External antenna connector (optional)
  2. One optional video port (HDMI 2.0b/Displayport 1.4a (HBR3)/VGA/PS2/serial/USB Type-C with DisplayPort Alt mode)
  3. DC-in cable clip
  4. USB 3.2 Gen 1 port with Smart Power On
  5. USB 3.2 Gen 1 port
  6. Kensington security-cable slot and Padlock ring
  7. 4.5 mm barrel power adapter port
  8. Two DisplayPort 1.4a (HBR2)
  9. Service Tag label
  10. Two USB 3.2 Gen 2 ports
  11. RJ45 Ethernet port

Specifications of OptiPlex 7000 Micro

Dimensions and weight

The following table lists the height, width, depth, and weight of your OptiPlex 7000 Micro.

Table 2. Dimensions and weight

Description Values
Height 182.00 mm (7.17 in.)
Width 36.00 mm (1.42 in.)
Depth 178.00 mm (7.00 in.)

Weight

NOTE: The weight of your computer depends on the configuration ordered and manufacturing variability.

| 35 W: 1.31 kg (2.88 lbs)

65 W: 1.25 kg (2.75 lbs)

Processor
The following table lists the details of the processors that are supported by your OptiPlex 7000 Micro .

Table 3. Processor

Description| Processor type| Processor wattage| Processor core count| Processor thread count| Processor speed| Processor cache| Integrated graphics
---|---|---|---|---|---|---|---
Option one| 12th Generation Intel Core i3-12100| 60 W| 4| 8| 3.30 GHz to

4.30 GHz

| 12 MB| Intel UHD Graphics 730
Option two| 12th Generation Intel Core i3-12100T| 35 W| 4| 8| 2.20 GHz to

4.10 GHz

| 12 MB| Intel UHD Graphics 730
Option three| 12th Generation Intel Core i3-12300| 60 W| 4| 8| 3.50 GHz to

4.40 GHz

| 12 MB| Intel UHD Graphics 730
Option four| 12th Generation Intel Core i3-12300T| 35 W| 4| 8| 3.30 GHz to

4.20 GHz

| 12 MB| Intel UHD Graphics 730
Option five| 12th Generation Intel Core i3-12400| 65 W| 6| 12| 2.50 GHz to

4.40 GHz

| 18 MB| Intel UHD Graphics 730
Option six| 12th Generation Intel Core i3-12400T| 35 W| 6| 12| 1.80 GHz to

4.20 GHz

| 18 MB| Intel UHD Graphics 730
Description| Processor type| Processor wattage| Processor core count| Processor thread count| Processor speed| Processor cache| Integrated graphics
---|---|---|---|---|---|---|---
Option seven| 12th Generation Intel Core

i5-12500 vPro

| 65 W| 6| 12| 3.00 GHz to

4.60 GHz

| 18 MB| Intel UHD Graphics 770
Option eight| 12th Generation Intel Core i5-12500T

vPro

| 35 W| 6| 12| 2.00 GHz to

4.40 GHz

| 18 MB| Intel UHD Graphics 770
Option nine| 12th Generation Intel Core

i5-12600 vPro

| 65 W| 6| 12| 3.30 GHz to

4.80 GHz

| 18 MB| Intel UHD Graphics 770
Option ten| 12th Generation Intel Core i5-12600T

vPro

| 35 W| 6| 12| 2.10 GHz to

4.60 GHz

| 18 MB| Intel UHD Graphics 770
Option eleven| 12th Generation Intel Core

i7-12700 vPro

| 65 W| 12| 20| 2.10 GHz to

4.90 GHz

| 25 MB| Intel UHD Graphics 770
Option twelve| 12th Generation Intel Core i7-12700T

vPro

| 35 W| 12| 20| 1.40 GHz to

4.70 GHz

| 25 MB| Intel UHD Graphics 770
Option thirteen| 12th Generation Intel Core

i9-12900 vPro

| 65 W| 16| 24| 2.40 GHz to

5.10 GHz

| 30 MB| Intel UHD Graphics 770
Option fourteen| 12th Generation Intel Core i9-12900T

vPro

| 35 W| 16| 24| 1.40 GHz to

4.90 GHz

| 30 MB| Intel UHD Graphics 770

Chipset

The following table lists the details of the chipset supported by your OptiPlex 7000 Micro.

Table 4. Chipset

Description Values
Chipset Q670
Processor 12th Generation Intel Core i3/i5/i7/i9
DRAM bus width 64-bit
Flash EPROM 32 MB + 16 MB
Description Values
--- ---
PCIe bus Up to Gen4

Operating system

Your OptiPlex 7000 Micro supports the following operating systems:

  • Windows 11 Home, 64-bit
  • Windows 11 Pro, 64-bit
  • Windows 11 Downgrade (Windows 10 image)
  • Windows 11 Pro Education, 64-bit
  • Windows 11 CMIT Government Edition, 64-bit (China only)
  • Kylin Linux Desktop version 10.1 (China only)
  • Ubuntu Linux 20.04 LTS, 64-bit

Memory

The following table lists the memory specifications of your OptiPlex 7000 Micro.

Table 5. Memory specifications

Description Values
Memory slots Two-SODIMM slots
Memory type DDR4/DDR5
Memory speed ●    DDR4—3200 MHz

●    DDR5—4800 MHz

Maximum memory configuration| 64 GB
Minimum memory configuration| 4 GB
Memory size per slot| 4 GB, 8 GB, 16 GB, 32 GB
Memory configurations supported| ●    4 GB, 1 x 4 GB, DDR4, 3200 MHz, single- channel

●    8 GB, 1 x 8 GB, DDR4, 3200 MHz, single-channel

●    8 GB, 2 x 4 GB, DDR4, 3200 MHz, dual-channel

●    16 GB, 1 x 16 GB, DDR4, 3200 MHz, single-channel

●    16 GB, 2 x 8 GB, DDR4, 3200 MHz, dual-channel

●    32 GB, 1 x 32 GB, DDR4, 3200 MHz, single-channel

●    32 GB, 2 x 16 GB, DDR4, 3200 MHz, dual-channel

●    64 GB, 2 x 32 GB, DDR4, 3200 MHz, dual-channel

●    8 GB, 1 x 8 GB, DDR5, 4800 MHz, single-channel

●    16 GB, 1 x 16 GB, DDR5, 4800 MHz, single-channel

●    16 GB, 2 x 8 GB, DDR5, 4800 MHz, dual-channel

●    32 GB, 1 x 32 GB, DDR5, 4800 MHz, single-channel

●    32 GB, 2 x 16 GB, DDR5, 4800 MHz, dual-channel

●    64 GB, 2 x 32 GB, DDR5, 4800 MHz, dual-channel

Memory matrix

The following table lists the memory configurations supported on your OptiPlex 7000 Micro.

Table 6. Memory matrix

Configuration Slot
SO-DIMM1 SO-DIMM2
4 GB DDR4 4 GB
8 GB DDR4/DDR5 4 GB
8 GB DDR4/DDR5 8 GB
16 GB DDR4/DDR5 8 GB
16 GB DDR4/DDR5 16 GB
32 GB DDR4/DDR5 16 GB
32 GB DDR4/DDR5 32 GB
64 GB DDR4/DDR5 32 GB

External ports
The following table lists the external ports of your OptiPlex 7000 Micro.

Table 7. External ports

Description Values
Network port One RJ-45 Ethernet port 10/100/1000 Mbps
USB ports ●    One USB 3.2 Gen 2 port with PowerShare (Front)

●    One USB 3.2 Gen 2×2 Type-C port (Front)

●    One USB 3.2 Gen 1 port (Rear, for 35 W)

●    One USB 3.2 Gen 1 port with Smart Power On (Rear, for 35 W)

●    Two USB 3.2 Gen 2 ports (Rear, for 35 W)

●    One USB 3.2 Gen 1 port with Smart Power On (Rear, for 65 W)

●    Two USB 3.2 Gen 2 ports (Rear, for 65 W)

Audio port| ●    One Universal audio port (front)

●    One Re-tasking line-out/line-in audio port (Front)

Video port| ●    One Optional video port (HDMI 2.0b/Displayport 1.4a (HBR3)/VGA/PS2/serial/USB Type-C with DisplayPort Alt mode) (Rear, for 35 W and 65 W)

●    Two DisplayPort 1.4a (HBR2) (Rear, for 35 W)

●    Three DisplayPort 1.4a (HBR2) (Rear, for 65 W)

NOTE: Download and install the latest Intel Graphics driver from www.dell.com/support to enable multiple displays.

Media-card reader| Not supported
Power-adapter port| ●    One DC-in port with 4.5 mm barrel for 35 W

●    One DC-in port with 7.4 mm barrel for 65 W

Description Values
Security-cable slot ●    One Kensington lock slot

●    One Padlock ring

Internal slots

The following table lists the internal slots of your OptiPlex 7000 Micro.

Table 8. Internal slots

Description Values
M.2 ●    One M.2 2230 slot for WiFi and Bluetooth card

●    Two M.2 2230/2280 slot for SSD

NOTE: To learn more about the features of different types of M.2 cards, search in the Knowledge Base Resource at www.dell.com/support.

Ethernet

The following table lists the wired Ethernet Local Area Network (LAN) specifications of your OptiPlex 7000 Micro.

Table 9. Ethernet specifications

Description Values
Model number Intel I225
Transfer rate 10/100/1000/2500  Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) module specifications of your OptiPlex 7000 Micro.

Table 10. Wireless module specifications

Description Option one Option two Option three
Model number Intel AX211 Intel Dual Band Wireless-AC 9462 MediaTek MT7921
Transfer rate Up to 2400 Mbps Up to 433 Mbps Up to 1200 Mbps
Frequency bands supported 2.4 GHz/5 GHz/6 GHz

NOTE: The 6 GHz

frequency is supported on computers installed with Windows 11 operating system only.

| 2.4 GHz/5 GHz| 2.4 GHz/5 GHz
Wireless standards| ●    WiFi 802.11a/b/g

●    Wi-Fi 4 (WiFi 802.11n)

●    Wi-Fi 5 (WiFi 802.11ac)

●    Wi-Fi 6E (WiFi 802.11ax)

| ●    WiFi 802.11a/b/g

●    Wi-Fi 4 (WiFi 802.11n)

●    Wi-Fi 5 (WiFi 802.11ac)

| ●    WiFi 802.11a/b/g

●    Wi-Fi 4 (WiFi 802.11n)

●    Wi-Fi 5 (WiFi 802.11ac)

●    Wi-Fi 6 (WiFi 802.11ax)

Description Option one Option two Option three
Encryption ●    64-bit and 128-bit WEP

●    128-bit AES-CCMP

●    TKIP

●    256-bit AES-GCMP

| ●    64-bit and 128-bit WEP

●    128-bit AES-CCMP

●    TKIP

| ●    64-bit and 128-bit WEP

●    128-bit AES-CCMP

●    TKIP

●    256-bit AES-GCMP

Bluetooth| Bluetooth 5.2| Bluetooth 5.1| Bluetooth 5.2

Audio

The following table lists the audio specifications of your OptiPlex 7000 Micro.

Table 11. Audio specifications

Description Values
Audio controller ALC3246-CG
Stereo conversion Supported
Internal audio interface High definition audio
External audio interface ●    One Universal audio jack (front)

●    One re-tasking line out/line in audio port (front)

Number of speakers| One internal speaker (optional)
Internal-speaker  amplifier| Supported (audio codec integrated)
External volume controls| Keyboard shortcut controls
Speaker output:|
 | Average speaker output| 2 W
 | Peak speaker output| 2.5 W
Subwoofer output| Not supported

Storage

This section lists the storage options on your OptiPlex 7000 Micro.

Table 12. Storage matrix

Storage| 1st M.2 socket| 2nd M.2 socket| 1st Bootable Device
---|---|---|---
M.2 solid-state drive| Yes|  | 1st M.2 solid- state drive
Dual M.2 solid-state drive| Yes| Yes| 1st M.2 solid- state drive

Table 13. Storage specifications

Storage type Interface type Capacity
M.2 2230, Class 35 solid-state drive PCIe NVMe Gen3 x4 Up to 1 TB
M.2 2230, Class 35, Opal Self- Encrypting solid-state drive PCIe NVMe Gen3
x4 256 GB
M.2 2280, Class 40 solid-state drive PCIe NVMe Gen4 x4 Up to 2 TB
M.2 2280, Class 40, Opal Self- Encrypting solid-state drive PCIe NVMe Gen3
x4 Up to 1 TB

RAID (Redundant Array of Independent Disks)

For optimal performance when configuring drives as a RAID volume, it requires identical drive models.
RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any IO operations with block sizes larger than the stripe size will split the IO and become constrained by the slowest of the drives. For RAID 0 IO operations where block sizes are smaller than the stripe size, whichever drive the IO operation targets will determine the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.
RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data
is mirrored across multiple drives: all IO operations must be performed identically to both drives, thus variations in drive performance when the models are different, results in the IO operations completing only as fast as the slowest drive. While
this does not suffer the variable latency issue in small random IO operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all IO types. One of the worst examples of constrained performance here is when using unbuffered IO. To ensure writes are fully committed to non-volatile regions of the RAID volume, unbuffered IO bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the IO operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of IO operation completely negates any advantage of a higher performing drive in the volume.
Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have very different performance characteristics for certain types of IO operations. Thus, matching by model ensures that the RAID volumes is comprised of an homogeneous array of drives that will deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

Power adapter

Table 14. Power adapter specifications

Description Option One Option Two Option Three
Type 90 W (35 W CPU) 130 W (35 W CPU) 180 W (65 W CPU)
Diameter (connector) 4.5 mm x 2.9 mm 4.5 mm x 2.9 mm 7.4 mm x 5.1 mm
Input voltage 100 VAC—240 VAC 100 VAC—240 VAC 100 VAC—240 VAC
Input frequency 50 Hz—60 Hz 50 Hz—60 Hz 50 Hz—60 Hz
Input current (maximum) 1.50 A 2.50 A 2.34 A
Output current (continuous) 4.62 A 6.70 A 9.23 A
Rated output voltage 19.50 VDC 19.50 VDC 19.50 VDC
Temperature range:
  Operating 0 °C to 40 °C (32 °F to 104

°F)

| 0 °C to 40 °C (32 °F to

104 °F)

| 0 °C to 40 °C (32 °F to

104 °F)

Description Option One Option Two Option Three
  Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F)

-40°C to 70°C (-40°F to 158°F)

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex 7000 Micro.

Table 15. GPU—Integrated

Controller Memory size Processor
Intel UHD Graphics 730 Shared-system memory 12th Generation Intel Core

i3-12100, i3-12100T, i3-12300, i3-12300T,

i5-12400, and i5-12400T processors

Intel UHD Graphics 770| Shared-system memory| 12th Generation Intel Core i5-12500, 15-12500T, i5-12600, i5-12600T,

i7-12700, i7-12700T, i9-12900, and

i9-12900T processors

Multiple display support matrix
The following table lists the multiple display support matrix for your OptiPlex 7000 Micro.

Table 16. Optiplex 7000 Micro (65 W)—Three DP1.4(HBR2) + optional VGA/HDMI2.0/DP1.4(HBR3)/Type-C ALT mode (DP1.4 HBR3)

Description Number of displays Maximum resolution
Intel UHD 730/770 Graphics 1 ●    On board integrated DP1.4 (4096×2304 @ 60

Hz)

●    Option card with VGA (1920×1200 @ 60 Hz)

●    Option card with DP1.4 (5120×3200 @ 60 Hz)

●    Option card with HDMI 2.0 (4096×2160 @ 60 Hz)

●    Option card with Type-C (5120×3200 @ 60 Hz)

2| ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with VGA (1920×1200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with DP1.4 (5120×3200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with HDMI 2.0 (4096×2160 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with Type-C (5120×3200 @ 60 Hz)

3| ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + Option card with VGA (1920×1200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + Option card with DP1.4 (5120×3200 @ 60 Hz)

Description Number of displays Maximum resolution
    ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated

DP1.4(4096×2304 @ 60 Hz) + Option card with HDMI 2.0 (4096×2160 @ 60 Hz)
●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with Type-C (5120×3200 @ 60 Hz)
4| ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + On board

integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with VGA

(1920×1200 @ 60 Hz)

 | ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with DP1.4 (5120×3200 @ 60 Hz)
 | ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with HDMI2.0 (4096×2160 @ 60 Hz)
 | ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with Type-C (5120×3200 @ 60 Hz)

Table 17. Optiplex 7000 Micro (35 W)—Two DP1.4(HBR2) + optional VGA/HDMI2.0/DP1.4(HBR3)/Type-C ALT mode (DP1.4 HBR3)

Description Number of displays Maximum resolution
Intel UHD 730/770 Graphics 1 ●    On board integrated DP1.4 (4096×2304 @ 60

Hz)

●    Option card with VGA (1920×1200 @ 60 Hz)

●    Option card with DP1.4 (5120×3200 @ 60 Hz)

●    Option card with HDMI 2.0 (4096×2160 @ 60 Hz)

●    Option card with Type-C (5120×3200 @ 60 Hz)

2| ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with VGA (1920×1200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with DP1.4 (5120×3200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with HDMI 2.0 (4096×2160 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + Option card with Type-C (5120×3200 @ 60 Hz)

3| ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + Option card with VGA (1920×1200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + Option card with DP1.4 (5120×3200 @ 60 Hz)

●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated DP1.4(4096×2304 @ 60 Hz) + Option card with HDMI 2.0 (4096×2160 @ 60 Hz)

Description Number of displays Maximum resolution
    ●    On board integrated DP1.4 (4096×2304 @ 60 Hz) + On board integrated

DP1.4 (4096×2304 @ 60 Hz) + Option card with Type-C (5120×3200 @ 60 Hz)

Hardware security

The following table lists the hardware security of your OptiPlex 7000 Micro.

Table 18. Hardware security

Hardware security

Kensington security-cable slot
Padlock ring
Chasis lock slot support
Chassis intrusion switch
Supply chain tamper alerts
SafeID including Trusted Platform Module (TPM) 2.0
Smart card keyboard (FIPS)
Microsoft 10 Device Guard and Credential Guard (Enterprise SKU)
Microsoft Windows Bitlocker
Local hard drive data wipe through BIOS (Secure Erase)
Self-encrypting storage drives (Opal, FIPS)
Trusted Platform Module TPM 2.0
China TPM
Intel Secure Boot
Intel Authenticate

Environmental

The following table lists the environmental specifications of your OptiPlex 7000 Micro.

Table 19. Environmental

Feature Values
Recyclable packaging Yes
BFR/PVC—free  chassis No
Vertical orientation packaging support Yes
Multi-Pack packaging Yes
Energy-Efficient Power Supply Standard
ENV0424 compliant Yes

NOTE: Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable. The anticipated required criteria for EPEAT 2018.

Regulatory compliance

The following table lists the regulatory compliance of your OptiPlex 7000 Micro.

Table 20. Regulatory compliance

Regulatory compliance

EPEAT registered configurations available
ENERGY STAR compliant configurations available
TCO 8.0 certified configurations available
US CEC MEPS compliant configurations available
Australia and New Zealand MEPS compliant configurations available
CEL
WEEE
Japan Energy Law
South Korea E-standby
EU RoHS
China RoHS

Operating and storage environment

This table lists the operating and storage specifications of your OptiPlex 7000 Micro. Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 21. Computer environment

Description Operating Storage
Temperature range 10°C to 35°C (50°F to 95°F) -40°C to 65°C (-40°F to 149°F)
Relative humidity (maximum) 20% to 80% (non-condensing, Max dew point
temperature = 26°C) 5% to 95% (non-condensing, Max dew point temperature =

33°C)
Vibration (maximum)*| 0.26 GRMS random at 5 Hz to 350 Hz| 1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)| Bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in./sec)| 105G half-sine pulse with a change in velocity of 133 cm/sec (52.5 in./sec)
Altitude range| 3048 m (10,000 ft)| 10,668 m (35,000 ft)
  CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

  • Measured using a random vibration spectrum that simulates user environment.
    † Measured using a 2 ms half-sine pulse.

Getting help and contacting Dell

Self-help resources

You can get information and help on Dell products and services using these self-help resources:

Table 22. Self-help resources

Self-help resources Resource location
Information about Dell products and services

www.dell.com
My Dell app|
Tips|

Contact Support| In Windows search, type Contact Support, and press Enter.
Online help for operating system| www.dell.com/support/linux www.dell.com/support/windows
Access top solutions, diagnostics, drivers and downloads, and learn more about your computer through videos, manuals and documents.| Your Dell computer is uniquely identified by a Service Tag or Express Service Code. To view relevant support resources for your Dell computer, enter the Service Tag or Express Service Code at www.dell.com/support.

For more information on how to find the Service Tag for your computer, see Locate the Service Tag on your computer.

Dell knowledge base articles for a variety of computer concerns| 1. Go to www.dell.com/support.

2.            On the menu bar at the top of the Support page, select

Support > Knowledge Base.

3.            In the Search field on the Knowledge Base page, type the keyword, topic, or model number, and then click or tap the search icon to view the related articles.

Contacting Dell

To contact Dell for sales, technical support, or customer service issues, see www.dell.com/contactdell.

NOTE: Availability varies by country/region and product, and some services may not be available in your country/region.
NOTE: If you do not have an active Internet connection, you can find contact information about your purchase invoice, packing slip, bill, or Dell product catalog.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals