rizoma LCX306 Adjustable Clutch Lever User Manual
- June 9, 2024
- rizoma
Table of Contents
rizoma LCX306 Adjustable Clutch Lever
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding. Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking,
bent, deformed, cracked, chipped or worn, no matter how slight, immediately
have a RIZOMA dealer inspect the products before you ride again. In any case
never try
to repair or modify the Rizoma products or their components, always replace
with Rizoma original components. Rizoma products may not be compatible with
your motorcycle or with other aftermarket equipment installed before. For your
safety Rizoma suggests to always contact
your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
PART NUMBER
Consult the website www.rizoma.com, in Brake/Clutch levers “ADJUSTABLE PLUS” section click “MEDIA” to download the PDF document approval ABE.
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components. Warning: Make sure that your motorbike
is standing firmly before you start work, as a fall may lead to damage to the
motorbike or injury to you or others.
WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS
OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY
NEUTRAL DETERGENT WITH COLD WATER.
INSTALLATION
INSTALL CLUTCH WIRE AND BUSHING
INSTALL CLUTCH LEVER
Attention: insert the original clutch wire in the regulator then insert the lever with the spacer in the support. Before driving the vehicle check the correct operation of the switch.
ADJUSTMENT CLUTCH LEVER
Attention: by acting on the adjuster you can adjust the distance of the clutch lever. (3 Adjustments possible)
Attention: by acting on the final part of the lever you can adjust the
length of the lever. After adjustment check that the lever in any position
does not touch any part of the bike.
Attention: using the clutch lever with a lower adjustment to the original
distance can cause problems to the gearbox and engine.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury. The action depicted is
performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the
countries where homologation is required. Thus RIZOMA® srl declines any
responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>