rizoma EE198 License Plate Light and Reflector Kit User Manual
- May 15, 2024
- rizoma
Table of Contents
EE198 License Plate Light and Reflector Kit
User Manual
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
General conditions
Attention : This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
License plate light kit
Consult the website www.rizoma.com, in license plate supports EE198 section click “MEDIA” to download the PDF document homologation.
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components. Warning:Make sure that your motorbike
is standing firmly before you start work, as a fall may lead to damage to the
motorbike or injury to you or others, also make sure that the temperature of
the exhausts and the engine are similar to the ambient temperature.
WARNING: TO CLEAN YOUR DETAILS OF THE KIT DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR DETAILS, BUT USE
ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation could damage the electrical system of the motorcycle and
cause a fire, resulting in personal injury or death. Electrical shock hazard.
Disconnect the battery before starting to install turn license plate bracket
or rear light or the turn signals. The pins must always be isolated and
respect the polarity in the connections. The warrantee is not valid for any
electric wires cutting or any product modify or tampering.
INSTALLATION
Your guarantee will not apply if the tail light has not been correctly
installed and connected to the electrical supply on your motorbike. Do not
carry out the installation unless you are specifically trained to do so;
otherwise, please contact an authorized dealer Rizoma. Your guarantee does not
apply to damage due frowning connection or excess voltage.
improper mechanical installation or orientation of the tail light may
invalidate your motorbike’s roadworthiness and insurance protection, or even
lead to accidents. Check that your tail light are securely fitted before you
ride your motorbike. Your tail light may heat up during use. Contact with bare
skin or heat-sensitive objects may lead to damage or injury.
Make sure that your motorbike is standing firmly before you start work, as a
fall may lead to damage to the motorbike or injury to you or others.
INSTALL REFLECTOR
INSTALL LICENSE PLATE LIGHT
INSTALL LICENSE PLATE LIGHT
CONNECTIONS
Disconnect the battery before starting to install the tail light. To avoid damage to the electrical system of the bike, for electrical connection of the tail light we recommend tuuse the Rizoma electric wiring. Arrange the wires to protect them from splash water and fasten them as appropriate, such as with wire connectors. Reconnect the motorbike battery and test the tail light.
CONNECTIONS LICENSE PLATE LIGHT
Attention : disconnect the battery before starting the electrical
connections.
Attention : follow the instructions below to ensure the correct operation
of the license plate light: respect the polarity in the connections and always
check that the connectors are insulated.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the
countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its
products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>