rizoma PE644 Pedivelle Escape S Pedivelle Rally Small User Manual
- June 1, 2024
- rizoma
Table of Contents
rizoma PE644 Pedivelle Escape S Pedivelle Rally Small
Product Information
Specifications
- Product Name: Pedivelle Rally Small Pegs
- Part Number: PE644
- Difficulty Level: Medium
- Time of Assemblage: 5-10 minutes
Product Usage Instructions
Installation Guidelines
-
Read and understand all instructions before starting the installation.
-
Ensure all accessories are correctly positioned before tightening to prevent compromising product functionality.
-
After installation, check all related motorcycle components like brakes, throttle, clutch, lights, and steering for proper functionality.
-
Regularly inspect and maintain the Pedivelle Rally Small Pegs.
Replace any products that are leaking, bent, deformed, cracked, chipped, or worn. -
Do not attempt to repair or modify the product; always replace it with original Rizoma components.
Usage Recommendations
- Avoid jumping, stunt riding, and excessive standing on the motorcycle to prevent breakage of rear set controls.
- Improper installation can lead to loss of function and motorcycle control, potentially causing accidents or injuries.
Installation Steps
- Step 1: Install Pedivelle Rally Small Pegs (Part Number: PE644).
- Step 2: Install rubber component.
- Step 3: Complete the assembly process.
Frequently Asked Questions
Q: Can I use the Pedivelle Rally Small Pegs on any motorcycle?
- A: Rizoma products may not be compatible with all motorcycles.
- Contact your authorized Rizoma dealer for guidance on compatibility.
Q: How often should I inspect the Pedivelle Rally Small Pegs?
A: Regularly inspect the Pegs, especially after long trips or periods of non-use. Replace any damaged components immediately.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair, or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- 1. Carefully read, understand, and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety, Rizoma suggests always contacting your RIZOMA dealer.
- O.E.M.: original equipment manufacturer.
- Before you start mounting the product please check the completeness of the kit on the part list.
- The difficulty level and the time of assemblage shown do not include the removal of OEM components.
- Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature.
- WARNING: TO CLEAN YOUR PEG DON’T USE LIQUID OR SPRAY ENGINE CLEANER, DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PEG, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
- Verify the operation of the foot brake, the brake light, and the shift lever before riding. Improper installation could lead to loss of function and loss of motorcycle control, resulting in an accident, personal injury, or death.
- Jumping, stunt riding and excessive standing will lead to breakage of the rear set controls, resulting in loss of motorcycle control, an accident, personal injury, or death.
INSTALLATION INSTRUCTION
INSTALL PEG
INSTALL RUBBER
Warning: for correct mounting of the rubber make sure that the tab is
completely in the appropriate place. (See photo)
Warning: for correct mounting of the rubber make sure that the cylindrical tab is completely in the hole for a screw. (See photo)
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice.
- Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based on contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required.
- Thus RIZOMA® srl declines any responsibility for a different use of its products.