HARBOR FREIGHT AL0342SORB Outdoor Wall Lantern Instruction Manual
- June 9, 2024
- HARBOR FREIGHT
Table of Contents
HARBOR FREIGHT AL0342SORB Outdoor Wall Lantern
HARBOR BREEZE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved
Thank you for purchasing this Harbor Breeze product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page. If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1003 , 8 a.m. – 8 p.m., EST, Monday – Sunday.You could also contact us at partsplus@lowes.com.
CARE AND MAINTENANCE
- Wipe with damp cloth or use window cleaner.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT? START YOUR NEXT PROJECT
• Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light |
- Bulb is burned out
- Faulty wire connection.
|
- Replace light bulb.
- Check wiring.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED
(NOT INCLUDED)
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
Attach A to outlet box using AA. Temporarily place F through B
determine amount of adjustment necessary B
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
Attach BB to connections with electrical tape (not included).
Install light bulb (not included).
Use 100-watt max. standard-base incandescent bulb or CFL/LED equivalent.
Assembly is complete.
Turn power back on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>