HARBOR FREIGHT 58299 24X36 Inch Folding Platform Truck Owner’s Manual

58299 24X36 Inch Folding Platform Truck

Product Information

• This product is a Folding Platform Truck with a weight capacity of 440 lbs. It has a platform size of 24 x 36 inches and comes with Fixed and Swivel Casters.
• The product comes with an owner’s manual and safety instructions which should be read before use. The manual provides assembly instructions, operation precautions, and important safety information.

Product Usage Instructions

Before using the product, read the owner’s manual and safety instructions provided. Failure to do so can result in serious injury.

Assembly Instructions

1. Attach the Fixed Casters (5) to the Platform (4) near the brackets on Handle (1) using Washers (7) and Bolts (8). See Figure A.
2. Attach the Swivel Casters (6) to the other end of the Platform (4) using Washers (7) and Bolts (8). See Figure B.
3. Tighten all Bolts (8) securely.
   Note: If desired, the Fixed and Swivel Casters (5, 6) can be installed on opposite ends.

Operation Instructions

• To unfold the platform truck, pull up on Handle (1) until it locks into place.
• To fold the platform truck:
  1. Step on the bar at the base of the Handle (1), see illustration to the right.
  2. Push the Handle (1) forward until it lays flat.

Important Safety Information

The following safety precautions should be taken while using this product:

• Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and when folding or unfolding.
• Do not exceed weight capacity. Be aware of dynamic loading!
• Inspect before every use; do not use if parts are loose or damaged.
• Use as intended only.
• Keep bystanders out of the area during assembly.
• Do not assemble when tired or when under the influence of drugs or medication.

If there are any missing or unreadable product labels or nameplates, contact Harbor Freight Tools for a replacement.

Warranty Information

This product comes with a limited 90 Day Warranty which gives you specific legal rights. You may also have other rights which vary from state to state.

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2022 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Important Safety Information

Assembly Precautions

1. Assemble only according to these instructions.
   Improper assembly can create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and when folding or unfolding.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of drugs or medication.

Operation Precautions

1. This product is not a toy. Do not allow children to play with or near this item.

2. Do not exceed weight capacity.
   Be aware of dynamic loading!Sudden load movement may briefly create excess load causing product failure.

3. Use as intended only.

4. Inspect before every use; do not use if parts are loose or damaged.

5.  Maintain product labels and nameplates. These carry important safety information.
   If unreadable or missing, contact Harbor Freight Tools for a replacement.

Specifications

• Platform Size: 24″ x 36″
• Weight Capacity: 440 lb.

Assembly Instructions

Note: If desired, the Fixed and Swivel Casters (5, 6) can be installed on opposite ends.

1. Attach the Fixed Casters (5) to the Platform (4) near the brackets on Handle (1) using Washers (7) and Bolts (8). See Figure A.
2. Attach the Swivel Casters (6) to the other end of the Platform (4) using Washers (7) and Bolts (8). See Figure B.
3. Tighten all Bolts (8) securely.

Operation Instructions

• Unfolding
  Pull up on Handle (1) until it locks into place.

• Folding

1. Step on the bar at the base of the Handle (1), see illustration to the right.
2. Push the Handle (1) forward until it lays flat.

Limited 90 Day Warranty

• Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
• To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
• If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
• This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
  • Note: If product has no serial number, record month and year of purchase instead.
  • Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175507754 when ordering parts.

Parts List and Diagram

Part| Description| Qty.|  | Part| Description| Qty.
---|---|---|---|---|---|---
1| Handle| 1| 5| Fixed Caster| 2
2| Non-Skid Sheet| 1| 6| Swivel Caster| 2
3| Bumper| 1| 7| Washer| 16
4| Platform| 1| 8| Bolt M10| 16

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>