Roswell Mini K67x Large-Diaphragm Condenser Microphone User Manual
- June 13, 2024
- ROSWELL
Table of Contents
Roswell Mini K67x Large-Diaphragm Condenser Microphone
DESCRIPTION
The Mini K67x is a large-diaphragm condenser microphone that features harmonic saturation, wideband operation, and extended frequency response. Customers have stated that this microphone is superior to more expensive options when used to record vocals, guitar cabinets, and drum overheads. A custom-designed large-diaphragm capsule provides the mic with its distinctive sound quality. The lows are well-delineated and free of any wooliness or flabbiness. The middles are spot on. Sibilance frequencies have a very minor reduction (less than one decibel). There is neither brashness nor hype at the upper end; rather, it is neutral, and the roll off is airy and smooth. This frequency response is complementary to a large number of different sources. The circuit is the second component that contributes to the sound that is distinctive to the microphone. It is responsible for providing both of the key components of what is commonly referred to as the “tube mic sound.”
The first is referred to as second-order harmonics. The other technique is known as transitory compression. Even though the K67x is not a tube microphone, some who are accustomed to the sound of tubes may be surprised by it. It is in the same tonal realm as microphones that cost four times as much thanks to the mic’s balanced tone and its ability to gently overload the audio with even-order harmonics. Northern California is the location where each and every Roswell microphone is conceived of, constructed, tested, and tuned. Our unrelenting dedication to ensuring quality results in outstanding performance. The Mini K67x comes with an improved flight case as well as our industry- famous Cutaway(TM) shock mount.
SPECIFICATION
- Brand: Roswell Pro Audio
- Connectivity Technology: XLR
- Connector Type: XLR
- Special Feature: Harmonic Saturation
- Compatible Devices: Audio Interface
- Included Components: Shockmount
- Polar Pattern: Unidirectional
- Audio Sensitivity: 1 dB
- Item model number: Mini K67x
- Color Name: Silver, Black, Grey
- Item Weight: 380 Grams
- Impedance: 200 Ohm
- Microphone Form Factor: Side-address, large diaphragm condenser
- Item Dimensions LxWxH: 5.91 x 1.97 x 1.97 inches
- Power Source: Phantom Powered
- Signal-to-Noise Ratio: 87 dB
- Number of Channels: 1
- Frequency Range: 20 – 20kHz
WHAT’S IN THE BOX
- Microphone
- User Manual
FEATURES
- Large-Diaphragm Condenser: Designed for high-quality audio recording.
- Versatile Connectivity: Connects to audio interfaces or mixers via XLR or USB.
- Shock Mount Compatibility: Includes a shock mount to reduce vibrations and handling noise.
- Phantom Power: Requires phantom power for optimal performance.
- High Sensitivity: Captures clear and detailed audio with precision.
- Wide Frequency Response: Records a broad range of frequencies for versatile use.
- Durable Build: Constructed with quality materials for long-lasting durability.
- Compact Size: Portable and easy to transport for various recording setups.
- Real-time Monitoring: Allows for live audio monitoring with headphones.
- Applications: Suitable for recording vocals, instruments, podcasts, and studio work.
HOW TO USE
- Connection: Connect the microphone to your audio interface or mixer using the appropriate cable.
- Phantom Power: If necessary, activate phantom power on your audio equipment.
- Microphone Placement: Position the microphone on a stand or shock mount for stability.
- Sensitivity Adjustment: Set the microphone’s sensitivity or gain according to your recording needs.
- Real-time Monitoring: Use headphones to monitor audio while recording.
- Recording: Open your chosen recording software and select the microphone as the input source.
- Pop Filter Application: Attach a pop filter to reduce plosive sounds when recording vocals.
- Post-processing: Edit and enhance your recorded audio as required.
- Storage: Store the microphone and accessories safely when not in use.
- Transportation: Safeguard the microphone during travel with proper protection.
MAINTENANCE
- Regular Cleaning: Periodically clean the microphone’s diaphragm and body to remove dust and smudges.
- Cable Inspection: Check the microphone cable for signs of wear, kinks, or damage and replace it if necessary.
- Proper Storage: Store the microphone safely in a protective case or pouch to prevent dust and physical harm.
- Moisture Protection: Keep the microphone away from moisture and high humidity to avoid potential harm.
- Phantom Power: Confirm if the microphone requires phantom power and connect it accordingly.
- Shock Mount Check: Examine the shock mount for any loose parts or damage, and tighten or replace as needed.
- Transportation: Safeguard the microphone during travel with a padded case to prevent impacts.
- Pop Filter Usage: Consider using a pop filter to minimize plosive sounds when recording vocals.
- Cable Organization: Keep the microphone cable neatly organized to prevent tangling.
- Professional Servicing: Seek professional assistance for microphone maintenance or repairs if necessary.
PRECAUTIONS
- Handle with Care: Treat the microphone gently to prevent physical damage.
- Moisture Protection: Keep the microphone safe from moisture, spills, or high humidity.
- Temperature Considerations: Protect the microphone from extreme temperature conditions.
- Phantom Power: Ensure the microphone’s power requirements are met.
- Cable Management: Secure the microphone cable to avoid tripping hazards and cable damage.
- Safe Storage: Store the microphone in a dry, dust-free environment when not in use.
- Pop Filter Usage: Consider using a pop filter to minimize plosive sounds during vocal recording.
- Warranty Awareness: Familiarize yourself with the microphone’s warranty terms for potential servicing or repairs.
- Software Updates: Keep microphone drivers and recording software up to date for optimal performance.
- Cable Protection: Use cable clips or organizers to prevent damage to the microphone cable.
TROUBLESHOOTING
- No Sound: Ensure proper microphone connection to the audio interface or mixer.
- Low Volume: Adjust the microphone gain or sensitivity on your recording device.
- Driver Issues: Install or update required microphone drivers or software if it connects via USB.
- Background Noise: Isolate the microphone from ambient noise sources in your recording space.
- Compatibility Check: Verify that the microphone is compatible with your recording equipment.
- Phantom Power Issues: Ensure phantom power is supplied if the microphone requires it.
- Microphone Selection: Choose the microphone as the input source in your recording software.
- Real-time Monitoring: Use headphones for live audio monitoring during recording.
- Software Conflicts: Investigate potential conflicts with recording software or drivers.
- Check Cable: Ensure the microphone cable is securely connected and free from damage.
FREQUENTLY ASKED QUESTIONS
What is the Roswell Mini K67x Large-Diaphragm Condenser Microphone?
The Roswell Mini K67x is a compact large-diaphragm condenser microphone designed for studio and live audio recording, known for its high-quality sound capture, versatility, and compact size.
What are the key features of the Roswell Mini K67x microphone?
The Roswell Mini K67x microphone features a large-diaphragm condenser capsule, cardioid polar pattern, versatile sound capture, low self-noise, and a compact design, making it suitable for vocals and instruments.
Is the Roswell Mini K67x suitable for recording vocals?
Yes, the Roswell Mini K67x is an excellent choice for recording vocals, providing clear and detailed sound reproduction, making it ideal for singers, voice-over artists, and podcasters.
Can I use it for instrument recording?
Certainly, the Roswell Mini K67x is versatile for instrument recording, capturing acoustic instruments, guitar amps, pianos, and more with precision.
Does the Roswell Mini K67x microphone require phantom power?
Yes, the Roswell Mini K67x requires 48V phantom power to operate, which is standard in most audio interfaces and mixers.
What is the frequency response of the Roswell Mini K67x microphone?
The microphone typically has a frequency response 20 - 20kHz Hz, capturing a wide range of audio frequencies.
Is there an on/off switch on the microphone?
The Roswell Mini K67x microphone typically does not have an on/off switch; it is active when connected to your audio interface or mixer.
What is the weight and dimensions of the Roswell Mini K67x microphone?
The Roswell Mini K67x microphone typically weighs around 380 Grams and has dimensions of approximately 5.91 x 1.97 x 1.97 inches.
Is it suitable for live performances?
While primarily designed for studio use, some artists may use the Roswell Mini K67x for live performances in controlled sound environments.
Can I use it with recording software and DAWs?
Yes, the Roswell Mini K67x is compatible with various recording software and digital audio workstations (DAWs) on both Windows and Mac platforms.
Is there a carrying case included for transport and storage?
The Roswell Mini K67x microphone package may include a protective carrying case for convenient transport and safe storage.
What type of connector does the Roswell Mini K67x microphone have?
The microphone typically features an XLR connector, which is a standard connection for professional audio equipment.
Is there a warranty for the Roswell Mini K67x Large-Diaphragm Condenser Microphone?
Roswell often provides a limited warranty for the Roswell Mini K67x Large- Diaphragm Condenser Microphone; warranties often range from 6 months tu 1 year or more.
Where can I purchase the Roswell Mini K67x microphone?
You can typically purchase the Roswell Mini K67x microphone from authorized Roswell dealers, music stores, or reputable online marketplaces to ensure you receive a genuine product.
Is there a shock mount included in the package?
The Roswell Mini K67x microphone package may include a shock mount for reducing vibrations and handling noise during recordings.
Can I use it for podcasting and voiceovers?
Yes, the Roswell Mini K67x is suitable for podcasting and voiceover work, offering high-quality audio capture for professional-quality recordings.