nVent HOFFMAN AL12AR Cylinder Lock Kit Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
AL12AR Cylinder Lock Kit
Instruction Manual
nVent HOFFMAN AL12AR Cylinder Lock Kit
INSTALLATION INSTRUCTIONS
- Remove existing latch.
- Insert cylinder lock through cover and fasten with cylinder nut.
- Install cam with sems screw. Bend cam, if required.
WARNING
To avoid electric shock, do not energize any circuits before all internal and external electrical and mechanical clearances are checked to assure that all assembled equipment functions safely and properly.
Key Lock Kit For Medium NEMA Type 1 Enclosure AL12AR
Front view of door showing lock
hole location
INSTALLATION INSTRUCTIONS
- Install cam to the tumbler assembly using the sems screw.
- Drill or punch .750 inch diameter hole as shown.
- Insert tumbler assembly, without disassembling, through .750 inch hole.
- Slip the tumbler stop and then the tumbler nut over the tumbler assembly as shown. Tighten the tumbler nut firmly.
WARNING
To avoid electric shock, do not energize any circuits before all internal and external electrical and mechanical clearances are checked to assure that all assembled equipment functions safely and properly.
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211
nVent.com/HOFFMAN
87567908
Documents / Resources
|
nVent HOFFMAN AL12AR Cylinder Lock
Kit
[pdf] Instruction Manual
AL12AR Cylinder Lock Kit, AL12AR, Cylinder Lock Kit, Lock Kit
---|---