HARBOR FREIGHT 59116 Articulated Vacuum Vise Owner’s Manual
- October 30, 2023
- HARBOR FREIGHT
Table of Contents
**HARBOR FREIGHT 59116 Articulated Vacuum Vise Owner’s Manual
**
WARNING
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
Specifications
| Max. Jaw Opening | 2-1/2″ |
|---|---|
| Jaw Width | 2-3/4″ |
| Throat Depth | 1-5/16″ Deep |
| Vise Height | 6-13/16″ High |
| Swivel Base | 360° |
IMPORTANT SAFETY INFORMATION
- Mount before use according to these instructions. Improper mounting can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during mounting and use.
- Keep work area clean and well lit.
- Keep bystanders out of the area during use.
- Do not use when tired or when under the influence of alcohol, drugs or medication.
- This product is not a toy. Do not allow children to play with or near this item.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
- Damage could occur to your vise and/or workpiece if you overtighten the Handle.
**SAVE THESE INSTRUCTIONS.**
Components
Mounting Instructions
Place Vise on smooth flat, non plastic surface. Secure Vise to surface by turning Lock Arm (3) to engage the Suction Cup (1).
Operation Instructions
- Turn Rod Handle (7) to open Front Vise (10) and Rear Vise (14). Place the object you wish to work on inside Jaws (11). Close and tighten Jaws by turning Rod Handle (7). Damage could occur if you over-tighten the Jaws.
- Tilt or swivel Hobby Vise to desired position by loosing Collar (4) counterclockwise. When you have the desired angle for working on your project, turn Collar (4) clockwise tightly. (See Figure 2)
- Vise can be adjusted 180° vertically and 360° horizontally. The swivel of the Dome (19) and Hex Shaft (18) will move the Vise Front and Vise Back (10, 14) to the desired angle for better grip and workability.
Maintenance
- Keep the moving parts lubricated. Wipe off any lubricant on the Handles and Jaws.
- Keep Jaws and Suction Cup clean. Remove Jaws for cleaning by removing Screws.
Parts List and Diagram
Part| Description| Qty| | Part| Description|
Qty| | Part| Description| Qty
---|---|---|---|---|---|---|---|---|---|---
1| Suction Cup| 1| 8| Washer| 2| 15| Nut| 1
2| Triangle Base| 1| 9| Rod Cover| 3| 16| Bolt| 1
3| Lock Arm| 1| 10| Front Vise| 1| 17| Fixture| 1
4| Collar| 1| 11| Jaw| 2| 18| Hex Shaft| 1
5| Dome Base| 1| 12| Jaw Cover| 2| 19| Dome| 1
6| Dome Holder| 1| 13| Screw| 4| 20| Washer| 1
7| Rod Handle| 1| 14| Rear Vise| 1| 21| Pin| 1
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTSREPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase
instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Specify UPC 193175455185
when ordering parts.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies
the defect, we will either repair or replace the product at our election or we
may elect to refund the purchase price if we cannot readily and quickly
provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost
of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
Costumer Support
26677 Agoura Road
Calabasas, CA 91302
1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>