EVERBILT 46477 10-Piece Handle Screw Kit Instruction Manual
- June 9, 2024
- Everbilt
Table of Contents
1006960527
HANDLE
INSTALLATION INSTRUCTIONS
Tools Required:
Screwdriver
Allen Wrench
Optional:
Handle Puller
Single Handle with Set Screw Installation Instructions:
- Remove handle red & blue hole button, if present.
- Use allen wrench to loosen the handle set screw.
- Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
- Replace handle and secure with set screw. Insert red & blue hole button if present.
A Handle
B Hole Button
C Set Screw
Single Handle with Button Installation Instructions:
- Remove the handle button and screw.
- Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
- Replace handle and screw, then replace the button.
A Handle
B Screw
C Button
Handles without Buttons Installation Instructions:
- Remove the handle screw.
- Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
- Replace handle and screw.
A Handle
B Screw
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>