EVERBILT 90682 Closet Rod Support Bracket User Guide
- October 30, 2023
- Everbilt
Table of Contents
90682 Closet Rod Support Bracket
User Guide
Item # 1007-782-452
Model # 90682
Closet Rod Support Bracket x 2
Installation
- Count 6 rods or more from one side of the wire shelf and install closet rod brackets as shown. Maximum spacing between closet rod brackets is 18 in. for this system (see Fig. 1).
- Put the closet rod support bracket (K) at an angle as shown and place the back part onto the horizontal rod (B) (see Fig. 2).
- Pull down the closet rod support bracket (K) and snap onto the shelf’s front rod (C) (see Fig. 2 and Fig. 3).
NOTE: Closet rod brackets need to be installed BEFORE any decorative shelf covers are installed on shelf.
Warranty
This product is guaranteed to be free of defects in materials and workmanship
for 2 years from the date of purchase. If this product is defective, call
1-800-305-1726 or return the product to the store from which it was purchased
for a replacement. Guarantee does not include normal wear and tear.
WARNING: This product can expose you to chemicals, including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Wamings.ca.gov
HOMEDEPOT.com
Please contact 1-800-305-1726 for further assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>