EVERBILT 90677 1-Tier Plastic and Steel Closet Organization Shelving Unit

Shoe Rack

Product Information

The 48 in. shoe rack add-on comes in three different models: white (Item

1007-781-988, Model #90677), gray (Item #1007-782-044, Model #90679), and

birch (Item #1007-782-347, Model #90681). The parts list includes one 48 in. x 16 in. wire shelf (Part A), three16 in. shoe shelf brackets (Part B), one decor shoe shelf cover (Part C), and six shoe shelf bracket clips (Part E).

Product Usage Instructions

1. Before installation, remove the protective film on the decor shoe shelf cover (Part C).
2. Install the shoe shelf brackets (Part B) on the existing vertical rails, paying attention to the installed site of left, right, and middle vertical rails.
3. Place the wire shelf (Part A) on the installed brackets (Part B), ensuring the rear horizontal rod sits under the back hooks of the brackets (Part B).
4. Install the clips (Part E) over the wire shelf (Part A) and onto the brackets (Part B) as shown in the diagram provided in the manual.
5. Put the decor shoe shelf cover (Part C) on the lip of wire shelf (Part A), then install as shown in the diagram provided in the manual.
6. Install the end caps (Part D) on the decor shoe shelf cover (Part C). If installing more than two pieces of decor shoe shelf covers, it is not necessary to put end caps between them.

If the product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. The product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase, but the guarantee does not include normal wear and tear. For further assistance, please contact HOMEDEPOT.com at 1-800-305-1726.

WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Wamings.ca.gov.

PART LIST

Installation

NOTE: Please remove protective film on the decor shoe shelf cover before installation.

1. Install shoe shelf brackets (B) on your existing vertical rails. Pay attention to the installed site of left, right and middle vertical rails
2. Place the wire shelf (A) on the installed brackets (B), ensuring the rear horizontal rod sits under the back hooks of the brackets (B).
3. Install the clips (E) over wire shelf (A) and onto brackets (B) as shown below.
4. Put the decor shoe shelf cover (C) on the lip of wire shelf (A), then install as shown.
5. Install the end caps (D) on the decor shoe shelf cover (C). NOTE: If you install more than 2 PCS of decor shoe shelf covers, it is not necessary to put the end caps between them.

Warranty

This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.

WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov

HOMEDEPOT.com
Please contact 1-800-305-1726 for further assistance.
Item #1007-781-988 / 1007-782-044 / 1007-782-347 Model #90677 / 90679 / 90681

References

• The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>