TRIPP LITE U444-06N-HU-C USB 3.2 Gen 1 USB C to HDMI Adapter Instruction Manual
- May 15, 2024
- Tripp Lite
Table of Contents
TRIPP LITE U444-06N-HU-C USB 3.2 Gen 1 USB C to HDMI Adapter
Installation Instructions
Instructions for USB 3.2 Gen 1 USB-C to HDMI Adapter models:
- U444-06N-HU-C
- U444-06N-H3U-C
- U444-06N-HGU-C
- U444-06N-HGUB-C
Note: Purchased product may differ from image.
Installation
Note: When the unit is connected to the USB-C port on your computer and to a network via Cat5e/6 cabling, a network connection will be automatically established. If no connection is made, you can manually establish one by going to your computer’s network settings page. For example, on a Mac, navigate to the Network section found in System Preferences, click the Assist Me button to get to the Network Setup Assistant, then follow the prompts to establish a connection.
- Connect the adapter’s USB-C connector to the USB-C port on your laptop, tablet or other compatible device.
- Connect the adapter’s HDMI port to the monitor’s HDMI port using an HDMI cable (such as P568-Series).
- Charge your device by connecting its USB-C charger to the adapter’s USB-C port.
- Connect a USB device to the adapter’s USB-A hub port.*
- Connect the adapter’s RJ45 port to a network using a UTP cable (such as N201-Series Cat6 cables).*
Refer to the USB-C Features table in the Owner’s Manual for the features your product supports.
Specifications
| Feature | Description |
|---|---|
| USB-C Connector | For connecting to compatible devices |
| HDMI Port | For output to HDMI display |
| USB-C Port | For charging connected devices |
| USB-A Hub Port | For connecting USB devices |
| RJ45 Port | For network connectivity |
Contact Information
Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States
eaton.com
© 2023 Eaton. All Rights Reserved. Eaton is a registered trademark. All trademarks are property of their respective owners. Publication No. 23-08-064 / 93-486D_RevA September 2023.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2023 Eaton
All Rights Reserved
Publication No.
23-08-064 /
93-486D_RevA
September 2023
Eaton is a registered trademark.
All trademarks are property of their respective owners.
FAQ
What should I do if my network connection is not established automatically?
Manually set up the network connection by accessing your computer’s network settings page. On a Mac, use the Network Setup Assistant found in System Preferences.
Can I charge my device using this adapter?
Yes, you can charge your device by connecting its USB-C charger to the adapter’s USB-C port.
Is this adapter compatible with all HDMI cables?
The adapter should be used with HDMI cables like the P568-Series for optimal performance.
Where can I find more information about the features supported by my product?
Refer to the USB-C Features table in the Owner’s Manual for detailed information on your product's capabilities.