babytrend WK15XXXA Trend 5.0 Activity Walker Instruction Manual
- June 9, 2024
- babytrend
Table of Contents
WK15XXXA Trend 5.0 Activity Walker
Instruction Manual
Instruction Manual
WK15XXXA Trend 5.0 Activity Walker
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
TREND 5.0 ACTIVITY WALKER SPEEDSTER
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR
REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase.
Any product which has been subjected to misuse, abuse, abnormal use, excessive
wear and
tear, improper assembly, negligence, environmental exposure, alteration or
accident, or has had its serial number altered or removed invalidates all
claims against the manufacturer. Any damage to property during installation is
the sole responsibility of the end user.
Customer Service Department can be contacted at 1
800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®. Please visit
http://babytrend.com/pages/limited-warranty for complete warranty details.
WARNING
WARNING: Please read all instructions before assembly and use of the
walker. Keep instructions for future use.
WARNING: Never leave child unattended. Always keep child in view while in
walker.
WARNING: Use only on flat surfaces free of objects that could cause the
walker to tip over.
WARNING: To reduce chance of child slipping out of the seat, check that
both feet of the child touch the floor. Never carry walker with the child in
it, as the child may get hurt or slip out.
WARNING: To avoid burns, keep the child away from hot liquids, ranges,
radiators, space heaters, fireplaces, etc.
WARNING-STAIR HAZARD: Avoid serious injury or death, block stairs/steps
securely before using walker.
- This walker is to be used only by infants, who are old enough to sit upright on their own and are ready to learn to walk (about 6 months old). DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.
- Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
- DO NOT ADJUST TRAY HEIGHT WITH THE BABY IN THE WALKER.
- Periodically inspect seat pad plastic tabs to be sure they are secured in the body. DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN. Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.
- Clean the stoppers on walker base regularly to maintain stopping performance. To clean the seat pad, use only mild household soap and warm water with a sponge or cloth. DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.
PARTS
Toys may vary Los juguetes pueden variar.
BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1
800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®.
ASSEMBLY
IMPORTANT! To ensure safe operation of your product, please follow these
instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. NEVER use if any parts
are missing or broken.
IMPORTANT! Adult assembly is required.
IMPORTANT! Always check that the baby walker is locked in the open
position before using.
ATTENTION: Carefully remove parts from box. Check hat you have all the
parts for this model before assembling the baby walker.
TO ASSEMBLE WALKER
- • To open the baby walker raise the tray to the middle position (Fig. 1).
- • The baby walker can be used for 3 different heights. Turn the safety
button and slide vertically to adjust the height. See the 3 heights diagram
under the walker for indications of the height being used (Fig. 2).
3) • Check that the safety button is turned 90 degrees to prevent
the accidental release of the mechanism (Fig. 3).
4) • Attach the fabric nearest to the tray, push the pin downward
through the fabric into to the hole of the frame until it snaps into place.
Repeat for the opposite side (Fig. 4a).
• Lastly, insert the pins into
the holes behind the tray, by pushing downwards through the fabric until each
one clicks (Fig. 4c).
NOTE: All pins should be aligned to the corresponding holes of the frame and click into place to ensure the fabric is securely attached. • Once all the pins are set in the correct position, the seat padding should create a secure backrest (Fig. 4d).
NOTE: To avoid tearing, do not lift
the walker from the seat padding. - • Place walker on a solid flat surface with bottom of base facing upward.
Insert the pins of the wheels into their housing by pressing them until they
snap into position. Please check that wheels are locked into place before
proceeding (Fig. 5a).
• Insert the pins of the stoppers into their housing by pressing them until they snap into position (Fig. 5b).
• Insert the rear Spoiler into the frame. Push in firmly until it
clicks into position.
NOTE: Do Not pull or lift the walker from the Spoiler (Fig. 5c).
• Attach the decorative wheels by clicking the tabs into the housing on all 4 sides (Fig. 5d). - • To attach the toy tray, insert and turn the two white knobs underneath to
lock the tray in place (Fig. 6a). Do not use the toy tray if it has been
damaged or broken.
• To insert the toy mirror align the tab
on the mirror insertion to the open slot on the walker frame. Insert firmly
until it snaps into position (Fig. 6b).
7) • To fold the walker, turn
the button to unlock and push it to release. Then push the tray downward to
the lowest position (Fig. 7).
8) • Lift the front plastic pins of the
seat upwards and pull the pins out of the holes (Fig. 8a).
• Squeeze and release the straps with plastic buckles on back of
seat from their corresponding slots underneath the tray (Fig. 8b).
9) • Unlock the toy tray by turning the two white knobs underneath
(Fig. 9a). Then lift toy tray to remove (Fig. 9b). 
OPERATION
PLACING CHILD IN THE WALKER
WARNING: To reduce chance of child slipping out of the seat, check that
both feet of the child touch the floor. Never carry walker with the child in
it, as the child may get hurt of slip out.
- Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts. Do Not use the walker if it is damaged or broken or missing parts.
- Before placing your child in the walker, please determine that your child is developmentally ready for this type of product. Generally, your child must be able to sit upright unassisted and have adequate neck strength to exhibit very good control of his or her head. Typically, a child should be at least 6 months of age to use this product. Infants develop at different rates and you should discuss the use of a walker with your pediatrician to ensure that your infant is ready.
- Adjust the seat height of the walker to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when their legs are straight. Adjust the walker height as needed as your child grows. Do not adjust height with child in the walker. Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
- The baby walker can be used for 3 different heights. To adjust height, remove baby from walker. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to desired height.
- When the position has been selected, check that the safety button turned through 90 degrees to prevent the accidental release of the mechanism. Always follow this procedure. Never use the baby walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.
TO ASSEMBLE TOY TRAY
WARNING: Keep batteries out of children’s reach. Old and new batteries
should not be mixed. Alkaline, standard carbon-zinc, and rechargeable
batteries should not be mixed. Remove batteries before storing music center
for a long period of time.
*The music unit requires two size AA batteries (not included).
10) • To open battery slot, unscrew and slide the lid out of its socket by
using the grooves. Press the center tab in while simultaneously pulling out
the battery lid. Then, lift the lid to insert two AA batteries (Fig.
10).
11) • These 3 buttons control the unit’s
volume (Fig. 11).
- • To listen to MUSIC, press the MUSIC buttons. Press the buttons to change
the songs and for the light effects (Fig. 12).
OTHER
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Copyright © 2022, Baby Trend Inc.
All Rights Reserved.
Todos los derechos reservados.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
1-800-328-7363
(8:00 a.m. ~ 4:30 p.m. PST)
www.babytrend.com
References
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!