babytrend ST12D14E Passport Bassinet Stroller Instruction Manual

: June 5, 2024
: babytrend

Table of Contents

PARTS
ASSEMBLY
SAFETY
- INFANT CAR SEAT
FEATURES
FOLD
MAINTENANCE
MAINTENANCE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Passport Bassinet Stroller

ST12XXXE
Instruction Manual

PARTS

Check that you have all the parts for this model before assembling the stroller.

Wheels style may vary
INFANT CAR SEATS (Sold separately)

WARNING

WARNING: Please follow all of these instructions to ensure the safety of your child.
Keep these instructions for future reference.
WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.
WARNING: Never leave children unattended.
WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.
WARNING: Wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached.
WARNING: Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller so may result in damage to the stroller or the item (s) if not removed. Baby Trend® will not be liable or warrant any damage.
WARNING: Child may slip into leg openings and strangle. NEVER use in full recline position unless enclosure is raised to cover the front opening, per the instructions in section 11.

CAUTION: This single stroller is designed for one child only. Use with more than one child may cause the unbalance condition which can injure/ harm your child.
Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.
The maximum weight that can be carried in the storage basket is 5 pounds (2.27kg). Excessive weight may cause a hazardous unstable condition to exist.
The maximum weight that can be carried in the child tray is 3 pounds (1.36 kg).
The maximum weight that can be carried in the parent tray is 3 pounds (1.36 kg).
Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.
The child occupant must not exceed 50 lb (22.67 kg) or over 42 inches (106.7 cm) tall when used with the maximum weight on the child tray, parent tray and basket. Do not exceed 60 lb (27.21 kg) including the weight used in the accessories. Use of the stroller and attached car seat with a total weight more than 60 lb (27.21 kg) will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
ALWAYS refer to the manual located under the car seat for car seat weight limitations.
NEVER use the stroller on stairways or escalators.
NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
NEVER allow your stroller to be used as a toy.
NEVER run or jog with this stroller.

ASSEMBLY

IMPORTANT! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT! Adult assembly is required.

SET UP THE STROLLER FRAME

• Release the fold latch by pulling it outward (Fig. 1a) and unfold stroller frame by pulling upward on the stroller handle until the frame locks (Fig. 1b).
Rear wheels assembly: The rear wheels MUST be installed prior to use.

|
---|---

REAR AXLE- ASSEMBLY

2)• Remove the pin and 1 washer from both ends of the rear axle (Fig. 2a).
• Install the rear wheel with the auxiliary teeth inserting first (Fig. 2b).

|
---|---

• Get the cross bar through the rear wheel and insert the second washer (Fig. 2c).
• Place the pin horizontally into the hole of the axle bar and then rotate into a vertical position (Fig. 2d).

|
---|---

• (1) Align the tabs on the cap with the holes on the wheels. (2) Push the cap into the wheel to close the axle assembly.
NOTE: Press firmly with your palm to press the cap in completely (Fig. 2e).
• Repeat for the other side.
• Place the rear legs over the axle with wheels and apply downward pressure on both sides. Ensure both sides lock into place (Fig. 2f).

|
---|---

NOTE: Pull on the front and rear wheels to ensure all are securely attached to the stroller. NEVER use stroller if wheels do not lock into place. If you need assistance, please contact our customer service department at 1-800-328-7363, Monday-Friday, between 8:00 a.m. and 4:30 p.m.
PST. www.babytrend.com/contact-us

MOBILE PHONE INSET PARENT TRAY

WARNING: Do not place hot liquids or more than 3 lb (1.36 kg) in the parent tray. Serious burns or unstable conditions can result.
WARNING: Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller may result in damage to the stroller or the item(s) if not removed. Baby Trend® will not be liable or warrant any damage.

Diagram A – Parent Tray Insertion Direction

• To Insert Parent Tray: Locate the 3 open slots on the tray and face them toward the canopy.
• Align the parent tray tabs to the inner tabs on both sides of the stroller. Press the tray down firmly until both tabs click into position. See Diagram A.

REAR CANOPY ATTACHMENT TO PARENT TRAY
4) • Insert the center elastic band into the tray. From the underside hook it to the tray tab. Repeat for the side elastic bands (Fig. 4a).
• Underneath the frame secure the canopy sides with the bands (Fig. 4b). Fasten each hook and strap onto the stroller frame (Fig. 4c).

• Pull the canopy edge forward or backwards to open and close (Fig. 4d).
• Fold canopy visor out for additional shade or fold inward when not in use (Fig. 4e).

|
---|---

• Parent tray removal: Remove the elastic bands by reversing Step 4 (Fig. 4a). Under the stroller frame locate the parent tray tabs. Press them inwards and lift up the tray from the housing (Fig. 4f).

Diagram B – Parent Tray Cut Away and Phone Accommodation

• Mobile phone Inset tray: Place mobile phone into the inset tray section. Ensure the phone gets accommodated correctly and rest it against the angle point of the tray. See Diagram B.
NOTE: The positioner may not accommodate all mobile phones or other devices. Do not use positioner as a secure holder when not in use or if your phone is loose or is too large.

CHILD TRAY

WARNING: The child’s tray is not a restraint device: always secure your child with the seat harness. DO NOT lift the stroller by the child’s tray.
Use care when child is in the stroller and securing the front tray. Do not place hot liquids or more than 3 pounds (1.36 kg) in the child tray. Serious burns or unstable conditions could result.

• To attach the child tray: Push the tray downward into the connectors (Fig. 5a). Check that the tray is securely latched in place.

• To access the child seat: Push one release and lift up the tray simultaneously (Fig. 5b). Either side of the child tray will lift and rotate out of the way to allow access to the front seat.
• To remove the child tray: Push to release both ends and lift up the tray simultaneously (Fig. 5c).

|
---|---

STORAGE BASKET

• Check Straps: Ensure that all straps with snap closures are attached correctly. NOTE: Always secure straps as shown in (Fig. 6a).
• Basket Access / Flip-Up Leg Rest: Lift the leg rest to access the storage basket from the front side (Fig. 6b).
NOTE: Lift leg rest from the edge, and always close the storage basket front access when not in use.

|
---|---

SAFETY

REAR BRAKES

WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline as the stroller may slide down the hill.

• Press down the brake levers to engage and lift up on the brake levers to release. The stroller may require forward or rearward movement in order to engage the brake. Check that the brakes are properly applied (Fig. 7).

SECURE THE CHILD

WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.
STRANGULATION HAZARD: Child can strangle in loose safety harness. Never leave child in seat when safety harness is loose or undone.

• The shoulder straps of the 5-point harness have multiple positions. Select the position that places the shoulder strap level with, or below the top of the child’s shoulder (Fig. 8a).

• To secure the child, place the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs. Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten all buckles to the proper fit for the child (Fig. 8b).
• To adjust the harness to the next height level pull the strap in a hoop form through the slot (Fig. 8c).
• To adjust the harness to a lower height level thread the clip back into the slot and pull it out through the desired lower level (Fig. 8d).

|
---|---

• RELEASE! Push button on center clasp, the two harness buckles will release (Fig. 8e).

SEATBACK POSITIONING

• To recline the seat press the clip ends together to release and pull down. To place seat into an upright position, press the clip ends together while holding the
end of strap. Push clip upwards to secure into desired position (Fig. 9). The upright position should be used only for a child that is at least 6 months old.
Always re-adjust the safety harness, including the shoulder belts, when repositioning the seatback.

INFANT CAR SEAT

THE INFANT CAR SEAT

WARNING: Avoid serious injury from falling or sliding out, always use the Infant Car Seat harness.

Infant car seat sold separately
(visit babytrend.com for compatibilty chart)

ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats must attach to the module of the strollers front seat.
These models require child tray and seat back adjustment to the most reclined position.
NOTE: To make seat position adjustments refer to step 9.

CS01 EZ-Lift, CS02 EZ-Lift PLUS and
CS03 EZ-Lift PRO Infant Car Seats

• Align the car seat module to the inner frame connectors. Carefully rest the car seats lower rear against the angle point of the tray. Latch the module into the stroller frame. Press down firmly for the click. ALWAYS ensure that the car seat is properly connected and locked onto the stroller before each use by lifting up on the car seat handle (Fig. 10a).
NOTE: To make seat position adjustments refer to step 9.

REMOVING THE CAR SEAT:

• NOTE: Set handle to the carry position (Fig. 10b). Squeeze the release handle located at the Toprear of the car seat and lift away from the stroller (Fig. 10c).

|
---|---

FEATURES

CONVERT TO BASSINET MODE

IMPORTANT: Do not use the Mosquito Net with the car seat. Remove the Mosquito Net and Bassinet Feature to fold the stroller.

BASSINET EXTENSION
11) • Press the buttons to raise the leg rest (Fig. 11a). Undo the buckle strap and unfold the flaps from under the legrest (Fig. 11b).
• Use the hook and loop on the sides to assemble the bassinet. Rehook the straps (Fig. 11c – 11d).

• Secure the straps and button closures to the stroller (Fig. 11e).
Place the stroller seat into a full recline position (Fig. 11f). To put away the bassinet extension, reverse the steps above (Fig.
11f-11c). Fold in the side flaps on each side (Fig. 11g), and tuck in the front fabric (Fig. 11h). Then buckle the strap.

MOSQUITO NET

• Install mosquito net: Refer to step 11 and install the bassinet. Unzip canopy and pull out the net from the storage pocket (Fig. 12a).
• Stretch the net down to the unfolded flaps and zip together (Fig. 12b).
• Use the toggles on the left and right sides of the net to secure to the frame. Repeat for the other side (Fig. 12c).

• To store away the mosquito net: Undo the toggles, unzip from the flaps and start to roll toward canopy. Repeat for the other side (Fig. 12d).
• Locate the zipper attached to canopy end and connect zipper to track (Fig. 12e).
• Continue to tuck the net into pocket while zipping pocket closed (Fig. 12f).
NOTE: Tuck and zip in sections (Fig. 12g).
• To remove the bassinet, refer to step 11.

FOLD

TO FOLD STROLLER

WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.
WARNING: Care must be taken when folding stroller to prevent damage. Make sure all accessories, mobile phones, diaper bags or purses are removed before folding. Failure to remove items in, or on the stroller so may result in damage to the stroller or the item (s) if not removed. Baby Trend® will not be liable or warrant any damage.
CAUTION: Do not allow children near stroller while folding.

• Locate the strap in the seat pocket. Using one hand pull the strap firmly upward to unlock the frame (Fig. 13a).

• Holding the strap lift the stroller frame until it fully closes (Fig. 13b).
Compress stroller and secure with fold latch (Fig. 13c).

• Always tuck the pull strap back into the seat fabric (Fig. 13d).
NOTE: You may remove the tray for a compact fold. Refer to Step 4 (Fig. 13e).

TO UNFOLD STROLLER

CAUTION:
Do not allow children near stroller while unfolding.

• Unlock the fold latch (Fig. 14a) and unfold stroller frame by pulling upward on the stroller handle until the frame locks (Fig. 14b). Refer to the child tray instruction as needed for removing or adjusting the tray.

SECURING THE BASSINET FABRIC

• If assembly required:
Always secure the straps and buckle underneath the footrest when the bassinet is not in use (Fig. 15).

MAINTENANCE

SECURING THE SEAT FABRIC

• If assembly required: Feed the rear recline clip and the seat fabric through the appropiate hook and loop slots on the stroller frame (Fig. 16a).
• Ensure the safety straps underneath the rear seat are secured through the appropiate slots (Fig. 16b).

|
---|---

FRONT AND REAR WHEEL RELEASE

• If replacing the front wheel: Locate the release pin on the front of the wheel hub. Push in the release pin and pull the wheel out (Fig. 17a).
• Re-Install: Assemble the front wheels by inserting each to the pin. Press firmly to secure in place. NOTE: Release pin faces inward if wheel is positioned as shown in (Fig. 17b).
• If replacing the rear wheel: Press the release pin and pull the wheel out (Fig. 17c).

| |
---|---|---

MAINTENANCE

CARE AND MAINTENANCE

SEAT PAD

To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.

OTHER

Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

BABY TREND ® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are
required prior to returning product(s) to Baby Trend®.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com

ST12XXXE_2L_012422.1