babytrend PY86XXXC Lil Snooze Deluxe II Nursery Center Playard Instruction Manual
- June 5, 2024
- babytrend
Table of Contents
babytrend PY86XXXC Lil Snooze Deluxe II Nursery Center Playard Instruction Manual
Playard
Warnings
WARNING: Failure to follow the instructions
could result in serious injury or death. Make sure latches are secure. ALWAYS
provide the supervision necessary for the continued safety of your child. When
used for playing, never leave child unattended.
WARNING: INFANTS CAN SUFFOCATE:
- In gaps between a mattress too small or too thick and product sides.
- On soft bedding
- NEVER add a mattress, pillow, comforter, or padding
- Use only the mattress provided by Baby Trend®.
- The placard mattress/pad is specially designed to prevent suffocation. The playard mattress/pad has a solid base, a certain length and width, and is less than one inch thick in order to meet safety standards. Using a thicker or a different sized mattress/pad may allow a child’s head to get between mattress/pad and the side of the playard causing suffocation.
- To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
- ALWAYS place child on back to sleep.
- NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
- NEVER use a water mattress with this product.
WARNING
WARNING: STRANGULATION HAZARD
WARNING: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into
space between pad and loose mesh side causing suffocation.
- Strings can cause strangulation! NEVER place items with a string around a child’s neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.
- NEVER place the product near a window where cords from blinds or drapes can strangle a child.
- Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.
- ALWAYS ensure the full-size bassinet is fully assembled on the playard before using the following accessories: changing table and / or Napper.
- NEVER leave child in product with sides lowered. Be sure sides are raised and locked in position whenever child is in product.
WARNING: See playard floor and side rails for warning.
- The playard, including side rails, must be fully erected prior to use.
- Make sure latches are secure.
- Discontinue use of the product when child is able to climb out or reaches the height of 35 in. (890 mm), or 30 lbs. (13.60 kg).
- When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
WARNING: See playard floor and side rails for warning.
- The playard, including side rails, must be fully erected prior to use.
- Make sure latches are secure.
- Discontinue use of the product when child is able to climb out or reaches the height of 35 in. (890 mm), or 30 lbs. (13.60 kg).
- When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.
WARNING
- ALWAYS ensure that the playard, changing table, and napper are safe by checking regularly, before placing the child in it, that every part is properly secured in place.
- NEVER leave the Full-size bassinet in place when child is in playard.
- NEVER leave Changing Table in place when child is in the playard.
- NEVER leave Napper in place when child is in the playard. Only one child can use the Playard/Nursery Center at any time.
- NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend® Customer Service at 1-800-3287363 for replacement parts, repair or instructions. NEVER substitute parts.
- This product is not intended for commercial use.
PARTS PIEZAS
Check the parts to make sure you have all the parts for this model before assembling the playard.
ASSEMBLY MONTAJE
IMPORTANT ! To ensure safe operation of your product, please follow these
instructions carefully. Please keep these instructions for future reference.
IMPORTANT ! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or sharp edges.
NEVER use if any parts are missing or broken.
IMPORTANT ! Adult assembly is required.
ATTENTION: Playard must be fully assembled and securely locked before installing or using other accessories.
-
Unzip bag and remove Playard frame (Fig. 1). Undo the Fasten straps and set the Mattress aside.
-
- Top rails must be fully erected before lowering center. Pull up one rail at a time, hold one hand on each side of the rail and pull up sharply, do not pull from the middle where the center latch release is located, make sure both tubes latch in place and each rail is rigid (Fig. 2).
IMPORTANT: The center must be raised while locking the rails. If one rail will lock but the other side will not then, unlock the rail by squeezing the release in center and try again.
-
- · Once all four (4) top rails are locked in place, push down on the center handle (Fig. 3a). The center mechanism automatically locks in place.
IMPORTANT: Test each top rail by pushing down slightly to confirm each is rigid and securely in place before use (Fig. 3b).
IMPORTANT: The handle located in the center of the Playard floor MUST remain raised (Approx. 45.7 cm or 18 inches) while locking the side rails in place. If the center is not raised the rails will NOT lock. If you experience difficulty and one side of the rail will lock but the other side will not then, unlock the rail by squeezing the release in the center and try again.
- · Once all four (4) top rails are locked in place, push down on the center handle (Fig. 3a). The center mechanism automatically locks in place.
-
- · Place the Mattress on the floor of the Playard with the padded side facing up (Fig. 4).
-
- Insert the hook & loop fasteners located on the underside of the Mattress through the slots in the floor on each end of the Playard (Fig. 5a). Fasten the hook and loop fasteners to the underside of the Playard floor to prevent the Mattress from moving (Fig. 5b).
-
- To operate the brakes on the Wheels, press downward on the brake levers. To release, lift upward on the lever (Fig. 6).
-
- Release the hook and loop fastener holding the Mattress from underneath the Playard floor or the Bassinet and set the mattress aside.
- Do not unlock top rails yet, center of floor must be raised before top rails will unlock.
- Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails (Fig. 7). Gather the Legs and Wheels together towards the center as close as possible so that they nearly touch.
-
- Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes (Fig. 8a), then push down (Fig. 8b).
NOTE: If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must be released for the top rail to fold.
- Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes (Fig. 8a), then push down (Fig. 8b).
-
- Gather four (4) corners and center all together tightly (Fig. 9). Wrap Mattress around Playard frame with padded side facing inward.
-
- Secure the hooks and loop fasteners by feeding them through the loops on the end of the Mattress and folding them back onto themselves (Fig. 10).
-
Place folded Playard into carry bag so that the handle comes through the opening between each side of the zipper.
WARNING
ACCESSORIES
Full-Size Bassinet & Cradles Warnings:
WARNING: Failure to follow these warnings and
the instructions could result in serious injury or death.
WARNING:FALL HAZARD: To help prevent
falls, do not use this product when the infant begins to push up on hands and
knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.80
kgs) or 3 months old, whichever comes first.
- ALWAYS check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.
WARNING: SUFFOCATION HAZARD
Infants have suffocated:
-
In gaps between extra padding and side of the bassinet/ cradle, and
-
On soft bedding
Use only the pad provided by Baby Trend®. NEVER add a pillow, comforter, or another mattress for padding. -
Strings can cause strangulation! DO NOT place items with a string around a child’s neck such as hood strings or pacifier cords. DO NOT suspend strings over the bassinet or attach strings to toys.
-
NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
-
Use bassinet with only one child at a time.
-
NEVER place a child under the bassinet.
-
The bassinet must be fully assembled and installed before using.
-
The playard, including side rails, must be fully erected prior to use. Make sure each latch is secure.
-
NEVER leave the bassinet in place when child is in playard.
-
NEVER leave Changing Table in place when child is in the playard.
-
Discontinue use of full-size bassinet when child begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.80 kgs) or 3 months old, whichever comes first.
-
Only one child can use the Playard at any time.
-
To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
-
ALWAYS place child on back to sleep.
-
ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.
-
If a sheet is used with the mattress/pad, use only the one provided by Baby Trend® or one specifically designed to fit the dimension of the playard bassinet mattress.
-
ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.
-
Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.
Full- Size Bassinet with metal support tubes
ATTENTION: Playard must be fully assembled and securely locked before installing or using the Full-size bassinet feature. (See To Assemble Playard section). You will need to remove the mattress from the bottom of the Playard to use inside your Full-size bassinet.
-
11) Connect opposing Mattress Support Tubes that are attached to the bottom of the Bassinet (Fig. 11a).
-
Before placing the Mattress into the Bassinet, make sure Mattress Support tubes are connected (Fig. 11b).
-
- Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place (Fig. 12).
-
13) Place the Mattress into the Bassinet with the padded side facing upward (Fig. 13).
TO REMOVE THE FULL-SIZE BASSINET P
- Remove Mattress from Bassinet. Remove all other accessories in use on the Bassinet. Disconnect opposing Mattress Support Tubes. Unsnap all clips and lift Bassinet.
ACCESSORIES
Changing Table:
WARNING-FALL HAZARD: Children have suffered serious injuries after
falling from changing tables. Falls can happen quickly. · STAY in arm’s reach
of your child. · ALWAYS secure this product to the support frame by
(manufacturer’s instructions for securing the changing unit/ pad). See
instructions.
WARNING: SUFFOCATION HAZARD
Babies have suffocated while sleeping on changing tables. Changing tables are
not designed for safe sleep.
- NEVER allow baby to sleep on changing table.
- NEVER leave the changing table in place when the child is in the bassinet or the playard. Always remove the changing table while not in use. To prevent your child from falls and other injuries, always use the safety belt when children are on the changing table.
- Discontinue use of the changing table when child begins to push up on hands and knees or has reached the height of 22 in. (558.8 mm), weight of 15 lbs. (6.80 kgs) or 3 months old, whichever comes first.
- Do not use changing table if it is damaged or broken.
- ALWAYS use the restraint system. Adjust belt as needed to get a snug fit.
TO ASSEMBLE CHANGING TABLE
ATTENTION: Playard and Full-size bassinet must be fully assembled and securely locked before installing or using the changing table feature (See To Assemble Playard and Full-size bassinet sections).
-
- Connect the two (2) Long Curved Bars together (Fig. 14a).
-
Insert the assembled curved bars into the Changing Table fabric (Fig. 14b). Slide the Curved Bars around inside sleeve of the Changing Table.
-
Connect the two (2) Short Bars to each end of the Long Curved Bar (Fig. 14c). Make sure that the knobs are both facing down and the same direction on each end (Fig. 14d).
-
- Insert Connector Knob Prongs into holes located on both corners of the Playard (Fig. 15a).
-
Turn the Connector Knobs counter clockwise to lock into place (Fig. 15b).
- Flip Changing Table over onto Playard (Fig. 15c).
- Snap the two (2) buttons on the flap down onto the Playard (Fig. 15d).
TO SECURE THE CHANGING TABLE TO THE PLAYARD
IMPORTANT! When the changing table is flipped up into the upper
-
16) Locate the hook and loop fasteners on the bottom of the changing table and inside the side rails of the playard (Fig. 16).
-
- Flip the changing table into its upper position (Fig. 17).
-
- Secure the changing table to the playard frame by fastening the hook and loop fasteners on the underside of the changing table to the side rails of the playard frame (Fig. 18).
TO USE THE CHANGING TABLE RESTRAINT SYSTEM
-
19) Place child on the changing table, make sure hands and arms are clear of the restraint. Bring the restraint around the child’s waist and clip the male and female ends of the buckle together (Fig. 19a).
-
Tighten strap until it fits snug around the child’s waist (Fig. 19b). DO NOT OVER TIGHTEN.
-
To remove, unsnap the buckle. ATTENTION: NEVER use changing table if it is damaged or broken.
-
- Flip Changing Table to the outside of the Playard. Unsnap fabric flap of the Changing Table from Playard. Twist Connector Knobs clockwise to unlock (Fig. 20a).
- Flip Changing Table to the outside of the Playard. Unsnap fabric flap of the Changing Table from Playard. Twist Connector Knobs clockwise to unlock (Fig. 20a).
-
Remove Changing Table from the Playard (Fig. 20b) and disconnect the Short Bars from the Curved Bar by pressing on the snap buttons and pulling apart. Remove Curved Bar from the Changing Table sleeve.
SIDE POCKET ORGANIZER
WARNING: Do not place hot liquids or more than 2 pounds in the Side Pocket Organizer. Serious burns or unstable conditions could result. For your safety, do not allow children to hang or play with side pockets.
-
- The Side Pocket Organizer is conveniently located on the side of your Playard and is equipped with multiple pockets to fit a variety of baby essentials (Fig 21).
WARNING ADVERTENCIA
ACCESSORIES
Napper and Inclined Sleepers:
WARNING: If a sheet is used with the pad, use only the one provided by
the bassinet or cradle manufacturer or one specifically designed to fit the
dimension of the bassinet or cradle mattress.
WARNING: Failure to follow these warnings and the instructions could
result in serious injury or death.
WARNING: FALL HAZARD:
- ALWAYS check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.
- To prevent falls, stop using the product when infant: Begins to wiggle out of position or turn over in the product.
- Head touches the upper edge of the product.
- Weighs more than 12 lb. (5.44 kg) (approximately 3 months of age) or is more than 22 in (55.88cm) in height whichever comes first.
- ALWAYS use restraint system, if a restraint system is provided with the product. Strings can cause strangulation! NEVER place items with a string around a child’s neck such as hood strings or pacifier cords. NEVER suspend strings over napper or attach strings to toys.
WARNING: SUFFOCATION HAZARD Infants have suffocated:
- In gaps between extra padding and side of the bassinet/ cradle, and
- On soft bedding ONLY use the pad provided by the manufacturer NEVER add a pillow, comforter, or another mattress for 31 padding.
- NEVER place extra padding under or beside infant when trapped between product and adjacent surfaces.
- ONLY use in playard when it is securely attached.
- NEVER use napper in different product.
- ALWAYS place child on back to sleep.
- To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
- ALWAYS place child on back to sleep.
- Use napper with only one child at a time
- NEVER place child in bassinet while napper is attached.
- ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.
ATTENTION: Playard and Full-size bassinet must be fully assembled and securely locked before installing or using the napper or inclined sleeper feature (See To Assemble Playard and Full-size bassinet sections).
-
- Pull the napper fabric flaps up at the top and bottom of the napper (Fig. 22a).
-
Insert and slide the left napper frame bar into the left sleeve of the napper frabric (Fig. 22b). Make sure the bar is curved upwards (Fig. 22c). Repeat this step for the right side (Fig. 22d).
NOTE: The curve of the bar must be upward. -
- At the Bottom of the napper, insert the left and right frame bars into each of the right and left end of the napper support tube and slide inward until they lock in place (Fig. 23a).
NOTE: Make sure the frame bar supports are seated and locked.
- At the Bottom of the napper, insert the left and right frame bars into each of the right and left end of the napper support tube and slide inward until they lock in place (Fig. 23a).
-
Pull the top napper fabric flap down and make sure the flap is secured (Fig. 23b).
-
- At the Top of the napper, insert the left and right frame bar into each of the right and left end of the napper support tube and slide inward until they lock in place (Fig. 24a). NOTE: Make sure the frame bar supports are seated and locked.
-
Pull the top napper fabric flap down and make sure the flap is secured (Fig. 24b).
-
- To attach the napper in the playard, slide the napper into the bassinet. Push the napper into the playard until it locks (Fig. 25). NOTE: DO NOT use napper on playard without the bassinet (See To Assemble Bassinet section, page 21) and securing the clips to playard.
-
- To remove the napper from playard, push both pins on the napper support tubes to release from the playard. Pull both bars out simultaneously (Fig. 26).
ACCESSORIES
Warnings for Toy Accessories including Toy bar/Mobile Canopy with toys
WARNING:
-
Possible entanglement injury.
-
Keep out of baby’s reach.
-
Remove Toy bar/Mobile/Canopy with toys when baby begins to push up on hands and knees. Recommended use from birth to 5 months.
-
Toys are not intended to be mouthed by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
-
ALWAYS attach all provided fasteners (strings, straps, clamps, etc.) tightly to playard according to these instructions. Check frequently.
-
Do not add additional strings or straps to attach to any other crib or playpen.
-
The Toy bar/Mobile/Canopy with toys is intended for visual stimulation and not to be grasped by the child.
-
- Push down on the ends of the toy bar to secure it onto the top of the napper frame. Pull up to remove them from the napper (Fig. 27).
MAINTENANCE
MAINTENANCE AND CLEANING INSTRUCTIONS: Use only household mild soap and warm
water.
DO NOT USE BLEACH. DO NOT MACHINE WASH.
BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1
800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®.
WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR
REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase.
Any product which has been subjected to misuse, abuse, abnormal use, excessive
wear and tear, improper assembly, negligence, environmental exposure,
alteration or accident, or has
had its serial number altered or removed invalidates all claims against the
manufacturer. Any damage to property during installation is the sole
responsibility of the end user. Customer Service Department can be contacted
at 1 800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®. Please visit
http://babytrend.com/pages/limited-warranty for complete warranty details.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
References
- Limited Warranty Coverage – Baby Trend
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>