babytrend PY86XXXJ Lil’ Snooze Deluxe III for Twins Instruction Manual

PY86XXXJ Lil’ Snooze Deluxe III for Twins
Instruction Manual

PY86XXXJ Lil’ Snooze Deluxe III for Twins

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.

WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and
tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

*Additional Rock-A-Bye. Toys may vary.

WARNING

Playard Warnings
WARNING : Failure to follow these warnings and the instructions could result in serious injury or death.
This product including side rails, must be fully erected prior to use. Make sure latches are secure.
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:

• In gaps between a mattress too small or too thick and product sides.

• On soft bedding.
  NEVER add a mattress, pillow, comforter, or padding.
  Use ONLY the mattress provided by Baby Trend®.

• The playard mattress/pad is specially designed to prevent suffocation. The playard mattress/pad has a solid base, which must be at least 40 in. long and 28 in. wide and not more than 1 in. thick in order to meet safety standards. Using a thicker or a different sized mattress/pad may allow a child’s head to get between mattress/pad and the side of the playard causing suffocation.

• Children can suffocate on soft bedding. Do not place pillows, comforters or an additional floor pad in this playpen.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.

• ALWAYS place child on back to sleep.

• NEVER use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose.
  They can cause suffocation.

• NEVER use a water mattress with this product.

FALL HAZARD: Always check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet.
WARNING : STRANGULATION HAZARD: NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between pad and loose mesh side causing suffocation.

• Strings can cause strangulation! NEVER place items with a string around a child’s neck such as hood strings or pacifier cords. NEVER suspend strings over playard or attach strings to toys.

• NEVER place the playard near a window where cords from blinds or drapes can strangle a child.

• Do not place any cord, strap or similar item in or near this playpen that could become wrapped around a child’s neck.

• Do not place this playpen near a window or patio door where a child could reach the cord of a blind or curtain and be strangled.

• Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.

• NEVER leave child in product with sides lowered. Be sure sides are in raised and locked position whenever child is in product.

• Do not leave a child unattended in this playpen.
  WARNING : See playard floor and side rails for warnings.

• The playard, including side rails, must be fully erected prior to use.

• Make sure latches are secure.

• Discontinue use of the product when child is able to climb out or has reached the height of 35 in. (89 cm), or 30 lbs. (13.6 kg).

• Do not use this playpen for a child who can climb out of it or who is taller than 89 cm.

• When child is able to pull to standing position, remove bumper pads, large toys and other objects that could serve as steps for climbing out.

• ALWAYS provide the supervision necessary for the continued safety of your child. When used for playing, never leave child unattended. Child in crib must be under supervision at all times.

• Do not use this playpen if you cannot exactly follow the instructions that come with it.

• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric.
  Check before assembly and periodically during use.
  Contact Baby Trend® Customer Service at 1-800-328-7363 for replacement parts, repair or instructions. NEVER substitute parts.

• Check this playpen regularly before using it, and do not use it if any part is loose or missing or if there are any signs of damage. Do not substitute parts. Contact the manufacturer if replacement parts or additional instructions are needed.

• Only one child can use the Playard/Nursery Center at any time.

• This product is not intended for commercial use.

• If equipped or added as a feature: Refer to your parts page and refer to the complete instructions for any added Baby Trend® Playard accesory prior to use.

• ALWAYS ensure that the Playard, Changing Table, Napper, Inclined Sleeper and Rock-A-Bye Bassinet / Hand Held Carrier are safe by checking regularly, before placing the child in it, check that every part is properly secured in place.

• NEVER leave the Large Bassinet in place when child is in playard.

• NEVER leave Changing Table in place when child is in the playard.

• NEVER leave the Napper, Rock-A-Bye Bassinet / Hand Held Carrier or Inclined Sleeper in place when child is in the playard.

BABY TREND ® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

PARTS

Ensure you have all the parts for this model before assembling the playard.

ASSEMBLY MONTAJE ASSEMBLAGE

IMPORTANT ! To ensure safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT ! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any parts are missing or broken.
IMPORTANT ! Adult assembly is required.

TO ASSEMBLE PLAYARD ATTENTION: Playard must be fully assembled and securely locked before installing or using other accessories.

1. • Unzip bag and remove Playard frame (Fig. 1). Undo the Fasten straps and set the Mattress aside.
   DO NOT push center down yet.

2. • Top rails must be fully locked before lowering center. Pull up one rail at a time, hold one hand on each side of the rail and pull up sharply, do not pull from the middle where the center latch release is located, make sure both tubes latch in place and each rail is rigid (Fig. 2).
   IMPORTANT : The center must be raised while locking the rails. If one rail will lock but the other side will not then, unlock the rail by squeezing the release in the center and try again.

3. • Once all four (4) top rails are locked in place, push down on the center handle (Fig. 3a). The center mechanism automatically locks in place. IMPORTANT: Test each top rail by pushing down slightly to confirm each is rigid and securely in place before use (Fig. 3b).

4. • Place the Mattress on the floor of the Playard with the padded side facing up (Fig. 4).

5. • Insert the hook & loop fasteners located on the underside of the mattress through the slots in the floor of each end of the playard (Fig. 5a).
   Fasten the hook and loop fasteners to the underside of the playard floor to prevent the mattress from moving (Fig. 5b). IMPORTANT : The handle located in the center of the Playard floor MUST remain raised (Approx. 45.7 cm or 18 inches) while locking the side rails in place. If the center is not raised the rails will NOT lock.|

6. • To operate the brakes on the wheels, press downward on the brake levers. To release, lift upward on the lever (Fig. 6).For already assembled Playard you may skip to page 18 for the accessories instructions.
   FOLDING PLAYARD
   

7. • Release the hook and loop fastener holding the Mattress from underneath the Playard floor or the Bassinet and set the mattress aside.
   DO NOT unlock top rails yet, center of floor handle must be raised before top rails will unlock.
   • Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails (Fig. 7). Gather the Legs and Wheels together towards the center as close as possible so that they nearly touch.

8. • Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes (Fig. 8a), then push down
   (Fig. 8b).
   NOTE : If the top rail(s) do not release completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must be released for the top rail to fold.

9. • Gather all four (4) corners and the center together tightly (Fig. 9). Wrap Mattress around Playard frame with padded side facing inward.

10. • Secure the hook and loop fasteners by feeding them through the loops on the end of the mattress then fold them back onto themselves (Fig. 10).
    • Place folded Playard into carry bag so that the handle comes through the opening between each side of the zipper. ACCESSORIES Bassinet & Cradles Warnings:

WARNING : Do not use this accessory if you cannot exactly follow the instructions that come with it. Failure to follow these warnings and the instructions could result in serious injury or death.
WARNING FALL HAZARD: To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kg), whichever comes first.

  * ALWAYS check that the large bassinet is securely locked on the base/stand by pulling upwards on the large bassinet bed.  

SUFFOCATION HAZARD
Infants have suffocated:

  * In gaps between extra padding and sides of bassinet/ cradle and
  * On soft bedding  

Use only the pad provided by the manufacturer.
NEVER add a pillow, comforter, or another mattress for padding.

  * Always attach large bassinet securely. If the large bassinet is not secured, at all locations child could get neck trapped between large bassinet and playard frame.
  * Do not place items with a string around a child’s neck such as hood strings or pacifier cords. Strings can cause strangulation! Do not suspend strings over the large bassinet or attach strings to toys.
  *  **NEVER** use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose.  

They can cause suffocation.

  * Use the large bassinet with only one child at a time.
  * NEVER place a child under the large bassinet.
  * The Playard must be fully assembled and installed before using.
  * The playard, including side rails, must be fully erected prior to use. Make sure each latch is secure.
  * NEVER leave the large bassinet in place when child is in playard.
  * NEVER place a child under the large bassinet.
  * To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
  * ALWAYS place child on back to sleep.
  * ALWAYS provide the supervision necessary for the continued safety of your child. NEVER leave children unattended.
  * If a sheet is used with the mattress/pad, use only the one provided by Baby Trend ® or one specifically designed to fit the dimension of the playard mattress.
  * Discontinue use of the large bassinet and the changing table when child begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of  

15 lbs. (6.8 kgs) or 3 months old, whichever comes first.

  * Child can become entrapped and die when improvised netting or covers are placed on top of a playard. Never add such items to confine child in playard.  

SUFFOCATION HAZARD: Infant carrier can roll over on soft surfaces and suffocate child.
NEVER place carrier on beds, sofas, or other soft surfaces.
FALL HAZARD: Check this accessory regularly before using it, and do not use it if any part is loose or missing or if there are any signs of damage. Do not substitute parts. Contact Baby Trend® Customer Service at 1-800-328-7363 if replacement parts or additional instructions are needed.

TO ASSEMBLE LARGE BASSINET

ATTENTION : Playard must be fully assembled and securely locked before installing or using the Bassinet feature (See To Assemble Playard section). You will need to
remove the mattress from the bottom of the Playard to use inside your Bassinet.

11. • Connect opposing Mattress Support Tubes that are attached to the bottom of the Bassinet (Fig. 11a).
    • Before placing the Mattress into the Bassinet, make sure Mattress Support tubes are connected (Fig. 11b).

12. • Position the Bassinet over and down into the fully assembled Playard. Secure in place by pushing down firmly on each plastic support clip until all are snapped into place (Fig. 12).

13. • Place the Mattress into the Bassinet with the padded side facing upward (Fig. 13). TO REMOVE LARGE BASSINET
    • Remove Mattress from Bassinet. Disconnect opposing Mattress Support Tubes. Unsnap all clips and lift Bassinet.
    ACCESSORIES
    Changing Table:
    WARNING: Do not use this accessory if you cannot exactly follow the instructions that come with it. Failure to follow these warnings and the instructions could result in serious injury or death.
    WARNING FALL HAZARD: Children have suffered serious injuries after falling from changing tables. Falls can happen quickly.
    • STAY within arm’s reach.
    • ALWAYS secure the changing table to the playard frame. See instructions, see page 33 to 39 for details.
    SUFFOCATION HAZARD : Babies have suffocated while sleeping on changing tables. Changing tables are not designed for safe sleep.
    • NEVER allow baby to sleep on changing table.
    • NEVER leave the changing table in place when the child is in the large bassinet or the playard. Always flip the changing table down while not in use. To prevent your child from falls and other injuries, always use the safety belt when children are on the changing table.
    • Discontinue use of the large bassinet and the changing table when child begins to push up on hands and knees or has reached the height of 25 in. (635 mm), weight of 15 lbs. (6.8 kg) or 3 months old, whichever comes first.
    • Do not use changing table if it is damaged or broken.
    • ALWAYS use the restraint system. Adjust belt as needed to get a snug fit.
    FALL HAZARD: Check this accessory regularly before using it, and do not use it if any part is loose or missing or if there are any signs of damage. Do not substitute parts. Contact Baby Trend® Customer Service at 1-800-328-7363 if replacement parts or additional instructions are needed.
    TO ASSEMBLE CHANGING TABLE
    ATTENTION: Playard and Full-size bassinet must be fully assembled and securely locked before installing or using the changing table feature (See To Assemble
    Playard and Full-size bassinet sections, page 12 – 25).

14. • Connect the two (2) Long Curved Bars together (Fig. 14a). • Insert the assembled curved bars into the Changing Table fabric (Fig. 14b).
    Slide the Curved Bars around inside sleeve of the Changing Table. Connect the two (2) Short Bars to each end of the Long Curved Bar (Fig. 14c).
    Make sure that the knobs are both facing down and the same direction on each end (Fig. 14d).

15. • Insert Connector Knob Prongs into holes located on both corners of the Playard (Fig. 15a). • Turn the Connector Knobs counter clockwise to lock into place (Fig. 15b). • Flip Changing Table over onto Playard (Fig. 15c). • Snap the two (2) buttons on the flap down onto the Playard (Fig. 15d). TO SECURE THE CHANGING TABLE TO THE PLAYARD
    IMPORTANT! When the changing table is flipped up into the upper position the changing table must be secured to the playard frame using the hook and loop fasteners provided.

16. • Locate the hook and loop fasteners on the bottom of the changing table and inside the side rails of the playard (Fig. 16).

17. • Flip the changing table into its upper position (Fig. 17).

18. • Secure the changing table to the playard frame by fastening the hook and loop fasteners on the underside of the changing table to the side rails of the playard frame (Fig. 18).

19. • Place child on the changing table, make sure hands and arms are clear of the restraint. Bring the restraint around the child’s waist and clip the male and female ends of the buckle together (Fig. 19a).

• Tighten strap until it fits snug around the child’s waist (Fig. 19b).

DO NOT OVERTIGHTEN.
• To remove, unsnap the buckle.
ATTENTION: NEVER use changing table if it is damaged or broken.
TO REMOVE THE CHANGING TABLE

20. • Flip Changing Table to the outside of the Playard. Unsnap fabric flap of the Changing Table from Playard. Twist Connector Knobs clockwise to unlock (Fig. 20a).

• Remove Changing Table from the Playard (Fig. 20b) and disconnect the Short Bars  from the Curved Bar by pressing on the snap buttons and pulling apart. Remove Curved Bar from the Changing Table sleeve.

PARENT ORGANIZER ASSEMBLY

WARNING: Storage basket only. Do not overload. max. weight: 3 lbs. (1.36 kg).

21. • Parent Organizer: Position each hook so that the hooked end is facing the rear side of the organizer. Press the hook down firmly into the slot until it snaps into place (Fig. 21a).
    • Connect the parent organizer to the playard by pressing the two (2) connecting clips over the top rail of one of the playard’s longer sides (Fig. 21b). NOTE: When using the full-size bassinet, clip the parent organizer clips directly onto the large full-size bassinet clips.
    TO ASSEMBLE ROCK-A-BYE BASSINETS
    

WARNING
WARNING: Do not use this accessory if you cannot exactly follow the instructions that come with it. Failure to follow these warnings and the instructions could result in serious injury or death.
FALL HAZARD: To prevent falls, stop using the product when infant:

• Begins to wiggle out of position or turn over in the product, head touches the upper edge of the product, reached the height of 25 in. (635 mm), weight of 15 lbs.
  (6.8 kgs) (approximately 3 months of age).

• ALWAYS use restraint system if a restraint system is provided with the product.
  SUFFOCATION HAZARD
  Infants have suffocated:

• In gaps between extra padding and sides of bassinet/ cradle and

• On soft bedding
  Use only the pad provided by the manufacturer. NEVER add a pillow, comforter, or another mattress for padding.

• When trapped between product and adjacent surfaces.

• ONLY use ROCK-A-BYE BASSINET on playard when it is securely attached.

• If a sheet is used with the pad, use only the one provided by Baby Trend® or one specifically designed to fit the dimension of the ROCK-A-BYE BASSINET bassinet mattress.

• NEVER use ROCK-A-BYE BASSINET in different product.

**WARNING:** NEVER leave child unattended SUFFOCATION HAZARD: Infant carrier can roll over on soft surfaces and suffocate child. NEVER place carrier on beds, sofas, or other soft surfaces.

• DO NOT use large bassinet when using Portable Rock-A-Bye Bassinet.
• NEVER place a child under the Rock-A-Bye bassinet.
• NEVER store the Rock-A-Bye bassinet in the playard while in use.
• The large bassinet must be fully assembled and installed before using.
• To help prevent heat build-up inside the playard and to avoid overheating your child, when using the Rock-A-Bye Bassinet NEVER use an outdoor canopy.
• NEVER leave Portable Rock-A-Bye Bassinet in place when child is in the playard. Only one child can use the Playard at any time.
• ALWAYS ensure that the playard, changing table, and Portable Rock-ABye Bassinet are safe by checking regularly, before placing the child in it, that every part is properly and securely in place.
• NEVER use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and periodically during use. Contact Baby Trend Customer Service at 1-800328-7363 for replacement parts, repair or instructions. NEVER substitute parts.

ATTENTION: Playard and large bassinet must be fully assembled and securely locked before installing or using the Rock-a-Bye bassinet feature. (See To Assemble Playard and large bassinet sections, pages 16 – 29).

Rock-A-Bye Bassinet assembly will require the following parts:

22. • Lay the Rock-A-Bye Bassinet fabric on a flat surface with the bottom side facing up. Locate the 2 Straight Bars (Fig. 22a).

NOTE: Open the flaps as needed to assemble the bars (Fig. 22b).

Insert the Straight Bars into the backside of the Rock-A-Bye bassinet (Fig. 22c).

• Attach the Short Bars with the 2 Connectors to the Straight Bars (Fig. 22d).

From the underside of the bassinet, ensure the clips are in the exterior and leg mounts face up during this preparation (Fig. 22e).

Insert both ends with the push pins into the Straight Bars. Ensure all pins click into postion on all 4 connection points (Fig. 22f).
23) • Keep the bassinet with the clips and leg mounts facing up (Fig. 23a).

Pull the flaps of the fabric over the bar housing as shown in the diagram (Fig. 23b).

NOTE: Ensure that the fabric opening wraps completely around the bar housing.

• Use the the hook and loop fasteners to close the flap (Fig. 23c). Repeat on the opposite side.

24. • To insert the Rock-A-Bye Bassinet Bars: Open the 4 foot extensions on both Bars (Fig. 24a).

Before inserting them into the housing check that the foot extensions all point inward as seen in the diagram (Fig. 24b).

•  Insert the Bars into the housing by aligning the push pin with the hole (Fig. 24c).

Ensure that the pins click into position (Fig. 24d).

NOTE: Look closely at the pin hole to be sure the push pin has completely come out of the hole. Repeat for all 4 connection points.

• Rotate the entire Rock-ABye and stand it on the foot extensions (Fig. 24e).

ACCESSORIES
Warnings for Toy Accessories including Toybar/Mobile Canopy with toys
WARNING:

• Possible entanglement injury.
• Keep out of baby’s reach.
• Remove Toybar/Mobile/Canopy with toys when baby begins to push up on hands and knees. Recommended use from birth to 5 months.
• Toys are not intended to be mouthed by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
• ALWAYS attach all provided fasteners (strings, straps, clamps, etc.) tightly to playard according to these instructions. Check frequently.
• Do not add additional strings or straps to attach to any other crib or playpen.
• The Toybar/Mobile/Canopy with toys is intended for visual stimulation and not to be grasped by the child.

TO ASSEMBLE CANOPY

ATTENTION: The canopy is NOT a carry handle.
25) • Push down on the ends of the canopy to secure it onto the top of the bassinet frame (Fig. 25a).

To remove it, pull the ends off the napper frame (Fig. 25b).
26) • The rear of the canopy has 2 fabric openings. Pull both opening over the 2 clips at the rear of the bassinet frame. Ensure to wrap the elastic completely over the bassinet frame (Fig. 26).
NOTE: Always complete the canopy before attaching the bassinet to the playard frame.

27. • To open the canopy: push forward on the front edge of the canopy while holding the rear of canopy in place (Fig. 27a).

• To fold the canopy: pull backwards on the front edge (Fig. 27b).

ROCKER FUNCTION
28) • Turn the bassinet over and close the 4 peg legs (Fig. 28a).

Set Bassinet on a flat surface (Fig. 28b).

NOTE: Rocking requires adult assistance and supervision, this is not an automatic rocking cradle (Fig. 28c).

NEVER use Bassinet on raised surface such as Table, Bed or Chair. A fall can occur.

TO SECURE THE ROCK-A-BYE BASSINET TO THE PLAYARD
IMPORTANT! When the Rock-A-Bye Bassinet is on the upper position, it must be secured to the playard frame by using the snap buttons, straps, or fasteners provided.

29. • Locate the 4 clip fasteners on the bottom of the Rock-A-Bye Bassinet (Fig. 29a).

• To attach the Rock-A-Bye Bassinet to the Playard, lower it into the large bassinet. Push down on the 4 clips and secure it onto the large bassinet railing (Fig. 29b).

Secure the two snaps on the strap down onto the Playard (Fig. 29c).

ATTENTION: Playard and large bassinet must be fully assembled and securely locked before installing or using the Portable Rock-a-Bye bassinet feature. (See To Assemble Playard and large bassinet sections, pages 16 – 29).
• Reverse the step above to remove the Rock-A-Bye Bassinet.

You may install 2 Rock-A-Bye Bassinets side by side. Repeat step 22-28 to install the additional bassinet.

NOTE: Reference step 20 to flip away the changing table before installing second bassinet.

TO FOLD REMOVABLE ROCK-A-BYE BASSINET
WARNING: Care must be taken when folding and unfolding to prevent finger entrapment.
CAUTION: Do not allow children near while folding and unfolding.

30. • ATTENTION: Always fold to store the Rock-A-Bye bassinet when not in use.
    Remove the Rock-A-Bye(s) Bassinet from the Playard and place on a flat surface (Fig. 30).
    • To Fold Reverse the previous section: TO ASSEMBLE Portable Rock-A-Bye Bassinet on pages 42 to 62.

MUSIC CENTER **WARNING:** Keep batteries out of children’s reach. Old and new batteries should not be mixed. Alkaline, standard carbon-zinc, and rechargeable nickel-cadium batteries should not be mixed. Remove batteries before storing music center for a long period of time.

31. • The Music Center is designed to be attached to the playard’s/bassinet’s long rail (Fig 31).

Music Operation
32) • The Music Center requires 4 AA batteries. Please see figure 32 for battery installation. Unscrew the battery door screws and pull outward on the battery door. Install batteries as shown. Re-install battery door and secure with screws.

To listen to MUSIC, press the MUSIC button.
Press the button to change the song.
MUSIC
To listen to NATURE sounds, press the NATURE button. Press the button to change the sound.
NATURE SOUNDS
To listen to SLEEP music, press the SLEEP button. Press the button to change the song.
SLEEP MUSIC
These 2 buttons control the unit’s volume.
VOLUME CONTROL
VIBRATION: To use the VIBRATION, press down  VIBRATION button once to activate the speed,press again for faster speed. Press it again to reduce the speed.
VIBRATION
NIGHT LIGHT: To use the night light, press the NIGHT LIGHT button.
NIGHT LIGHT

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

MAINTENANCE AND CLEANING INSTRUCTIONS:

Use only household mild soap and warm water.
DO NOT USE BLEACH.
DO NOT MACHINE WASH.

**Toys may vary
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
PY86XXXJ_3L_042721_HB

References

• Limited Warranty Coverage – Baby Trend
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>