Dream On Me 419-W Mesh Security Bed Rail Instruction Manual
- June 4, 2024
- Dream On Me
Table of Contents
Dream On Me 419-W Mesh Security Bed Rail
INSTALLATLON
WARNING-ENTRAPMENT HAZARD
NEVER use bed rail without properly securing bed rail to bed. lncorrect installation can allow bed rail to move away mattress, which can lead to entrapment and death.
SUFFOCATION AND STRANGULATION HAZARD
- Gaps in and around bed rails have entrapped young children and killed infants
- NEVER use with children younger than 2 years old.
- Use ONLY with older children who can get in and out of adult bed without help.
- NEVER use in place of crib.
- NEVER use unless bed rail is tight against mattress, without gaps, and at least 9 inches from headboard and footboard.
- Use ONLY on adult twin size bed with mattress and mattress support.
MAINTENANCE
- No part of the bed rail requires lubrication.
- Clean using warm soapy water, or a damp cloth.
- Do not use abrasive cleaners or bleach.
INSTALLATION
WARNING
ENTRAPMENT HAZARD: Never use bed rail without installing disk and strap assembly onto bed. correct installation can allow bed rail to move away from the mattress, which can lead to entrapment and death. Discontinue use if damaged, broken or if parts are missing.
- Insert the bed rail panel into to the T-bars.
- Measure crib mattress height. lf less than5″, align change to bottom or top holes of both sidebars with spring lock button and lock into place (A) or (B). lf mattress thickness is over 5″or more, DO NOT use the bed rail. The bed rail is not suitable for mattresses with a thickness over 5″
- Remove mattress. Take assembled bed rail and place on top of the crib mattress support so that the bed rail is on the front edge of the mattress support. Stretch straps across the frame so disk is on the back of the mattress support edge.
- Place mattress on top of bed rail and mattress support. Make sure that bed rail is tight against the mattress.
- A complete bed rail is now installed.
References
Read User Manual Online (PDF format)
Loading......