Dream On Me 0722R1-401 Zany 2 In 1 Baby Activity Center and Bouncer Owner’s Manual

: June 15, 2024
: Dream On Me

Table of Contents

Dream On Me 0722R1-401 Zany 2 In 1 Baby Activity Center and Bouncer
BATTERY INFORMATION
PARTS
ASSEMBLY
CARE AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Dream On Me 0722R1-401 Zany 2 In 1 Baby Activity Center and Bouncer

Scan the QR code to register your product https://dreamonme.com/customercare/registration/

Read all instructions before assembling and using the product.

IMPORTANT – Keep Instructions for future use.

WARNINGS

READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THE ACTIVITY CENTER. FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN THE CHILD GETTING INJURED.
FOR FUTURE REFERENCE, KEEP THE INSTRUCTIONS HANDY.
Adult assembly is required.
To prevent serious injury or death, use only for a child who can hold their head upright unassisted and who is not able to walk or climb out of the product.
Never leave the child unattended.
Parental supervision is required when the product is in use.
Never use near steps, pools, hot surfaces, or areas that may be hazardous to a child.
The product may move during use. Kindly supervise the child while in the product.

BATTERY INFORMATION

Do not mix new and used batteries.
Do not mix different types of batteries.
Only use replacement batteries of the type recommended. Recommended batteries/battery types are 2 X 1.5V, AA/SUM3/LR6.
Always remove exhausted batteries from the product. Do not attempt to charge non – non-non-rechargeable batteries.
Remove rechargeable batteries before charging.
Charge under adult supervision.
The batteries must be inserted with the correct polarity.
Do not short-circuit the supply terminals.

BATTERY DISPOSAL

Dispose of exhausted batteries at an official waste disposal site.
Do not burn or place in household waste.

FALL HAZARD

Babies can fall from the unit resulting in head injuries.
Never leave the child unattended. Always keep the child in view while in the product.
Never use near stairs.
To avoid tip-over, place the product on a flat, level surface.

STRANGULATION HAZARD

Do not place items with a string around the child’s neck, such as hood strings or pacifier cords.
Do not suspend strings over products or attach strings to toys.
Babies can fall from products resulting in head injuries.
Prevent access to stairs, steps, and uneven surfaces.
Guard all fires, and heating and cooking appliances.
Remove hot liquids, electrical flexes, and other potential hazards from reach.
Prevent collisions with glass in doors, windows, and furniture.
This product frame should be used only for short periods (e.g. 20 minutes).
This product frame is intended to be used by children who can sit unaided, approximately from 6 months.
This product is not intended for children weighing more than 26.4 lbs or for children who can walk or climb out of the product unassisted.
Check regularly that all fastenings and components are secure. Tighten and adjust as necessary such that the castors rotate and run freely.
Regularly check if no components are broken or missing.
Do not use the stationary activity center if it is damaged or broken.
Non-approved spare parts may render the repair or baby activity center unsafe. Contact Dream On Me Inc. for replacement parts.

THANK YOU

…. for choosing Dream On Me and Congratulations on joining our family; a family that has been transforming lives for over 30+ years! We appreciate your feedback and wish you the very best in the coming years with your new addition. If you have any questions or concerns please don’t hesitate to reach out to us. One of our trusted Customer Care representatives will be happy to assist you. Thank you again for entrusting us to provide you with safe, and affordable baby products and accessories.

LIMITED WARRANTY

Dream On Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect.
This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.

PARTS

If there are any missing parts, please contact Dream On Me before using the product.

Dream-On-Me-0722R1-401-Zany-2-In-1-Baby-Activity-Center-and-Bouncer-
fig-1

ASSEMBLY

ACTIVITY CENTER & BOUNCER ASSEMBLY – FRAME ASSEMBLY

Place the parts on a soft surface before assembling the product.
Place the Frame (A) upside-down on a flat surface and align the Frame Parts (H) over it as shown in the illustration.
Attach the Screws (B) in the insertions given on the Frame Parts fixing it to the Frame.
Tighten the Screws using a Screw Driver (not provided).
Once assembled, the Frame should look like the above illustration with the Frame Parts pointing forward. 1b.
Place the Base (G) on a flat surface.
Press the pin lock on the Base as shown in the zoomed-in illustration and insert it into the Base Tube (L) until the pin lock clicks into place.
Repeat this process to assemble the rest of the base such that it resembles the illustration above.

NOTE

Do not overtighten the screws.

2a.

Each of the Frame Tubes (F) has a strap hanging from it with 3 plastic holders corresponding to 3 heights.
Fit the plastic holder of the desired height into the slot of each Frame Part.
Repeat this process to attach the other two straps to the frame.
IMPORTANT: Make sure all three straps are adjusted to the same height.

2b.

Insert the 3 Frame Tubes into each of the 3 Bases (G) as shown in the zoomed illustration by pressing the pin lock on the tube and inserting them until it clicks into place.
If correctly assembled, the activity center should look like the illustration above.
3a. Insert the Seat Unit (D) into the seat ring of the Frame with moderate force until it snaps into place. Pull up the seat to ensure that it is securely fixed.
3b. Insert the Rainbow Toy (C) into the slot provided on the Play Tray (J) and rotate it clockwise until it clicks into place.
4a. Place the Play Tray into the slot provided on the Frame. Turn the tabs located underneath the Frame clockwise to lock the Tray into place.
4b. Position the grooves of the Octopus Toy (I) and Butterfly Toy (E) with the slots on the Frame and insert them. Turn each toy clockwise until they lock into place.
5a. Line up the grooves of the Lollipop and Bee (K) with the slots on the frame and insert them. Turn each toy clockwise until it locks into place.
5b. You can rotate the seat 360 degrees once it has been assembled for a fun time and convenience for your little one.

CARE AND MAINTENANCE

Wipe all plastic/metal parts clean with a damp cloth using mild soap, and dry thoroughly.
Light soiling of the seat pad can be cleaned with a damp cloth and a mild soap.
Machine wash the seat pad in cold water on a gentle cycle.
Do not use strong detergents or abrasive materials to wash the seat pad.
Do not dry clean.
Do not tumble dry. Line dry the seat pad.
To maintain stopping performance, clean friction strips regularly with a damp cloth.

YOU DID IT!
It’s time to make a happy and exciting time for your little one in this multi- tasking and fun Activity Center and Bouncer!

1532 S. WASHINGTON AVE STE1 PISCATAWAY, NJ 08854-9908