Dream On Me 418D-BLK Mesh Security Bed Rail Double Pack Instruction Manual
- June 4, 2024
- Dream On Me
Table of Contents
Dream On Me 418D-BLK Mesh Security Bed Rail Double Pack
WARNING-ENTRAPMENT HAZARD
NEVER use bed rail without properly securing bed rail to bed. lncorrect
installation can allow bed rail to move away from mattress, which can lead to
entrapment and death.
SUFFOCATION AND STRANGULATION HAZARD
- Gaps in and around bed rails have entrapped young children and killed infants.
- NEVER use with children younger than 2 years old.
- Use ONLY with older children who can get in and out of adult bed without help.
- NEVER use in place of crib.
- NEVER use unless bed rail is tight against mattress, without gaps, and at least 9 inches from headboard and footboard.
- NEVER use on toddler bed, bunk bed, water bed, or bed with
- Use ONLY on adult twin size bed with mattress and mattress support.
MAINTENANCE
- No part of the bed rail requires lubrication.
- Clean using warm soapy water, or a damp cloth.
- Do not use abrasive cleaners or bleach.
INSTALLATION
WARNING
ENTRAPMENT HAZARD: Never use bed rail without installing disk and strap
assembly onto the bed. lncorrect installation can allow bed rail to move away
from the mattress, which can lead to entrapment and death. Discontinue use if
damaged, broken or if parts are missing.
-
Insert the bed rail panel into to the T-bars,
-
Measure crib mattress height. f less than5″, aign change to botom or top holes of both side bars with spring lock button and lock into place (A) or (B lf mattress thickness is over 5’or more, DO NOT use the bed rail. The bed rail s not suitable for mattresses with thicknesses over 5″.
-
Remove mattress. Take assembled bed rail and place on top of crib mattress Support so that bed rai is on front edge of mattress support Stretch staps across frame so disk is on the back of matress Support edge. This disk that is supposed to be stuck on the other side of the mattress.
-
Adjust strap length to fit width.
-
Place mattress on top of bed rail and mattress support
Make sure that bed rail is tight against matress. -
Complete bed rail is now installed.
ITEM NAME: BED RAIL
ITEM NO.: #418D
Dream On Me lnc.
1532 South Washington Ave
Piscataway TWP NJ 08854
MADE IN ZHONGSHAN, GUANGDONG, CHINA
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/
1532, S. Washington Avenue Piscataway, NJ 08854
E-mail: [email protected]
www.dreamonme.com